Table of Contents
How do I change my Kwikset lock code?
It is recommended that you change it to a code of your own. Make sure the lock is unlocked and the door is open. Enter your Programming Code – for new installation, default is 0-0-0-0. Press enter arrow. You will hear one beep. Press 4 . Press enter arrow. You will hear one beep. Enter a new Programming Code.
What is the master code for Kwikset lock?
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
How do you reset a Kwikset lock code 909?
Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.
How do I set my Kwikset lock?
How do I program my SmartCode 913 lock? Open the door. Remove battery cover. Press the program button once. Enter new user code. Press lock button. If programming is successful the keypad will flash green once, and you will hear one beep. Connect with us. Monday-Friday: 7:00am-4:00pm PST. Saturday: 6:30am-2:30pm PST.
Can Kwikset locks be rekeyed to any key?
You can rekey all of your locks to match an existing key when the locks all have the same keyway. So it is impossible to slide a Kwikset key into a Schlage lock and a Schlage key into a Kwikset lock. These two locks cannot be rekeyed to match an existing key of the other.
Are all Kwikset keys the same?
A Kwikset SmartKey tool (One should’ve came with your lock, but if not, you can buy one on Amazon). The new (or rather, old) key that you want to use instead. This must be a Kwikset key, as Kwikset and Schlage keys are totally different from one another (and won’t work in each other’s locks).
How do I factory reset my Kwikset 910?
How to perform a factory reset: Remove the batteries. Press and hold the lock button on the keypad. Place the batteries back in (while still holding the button) The lock will beep three times over the course of 15 seconds or so. After the 3rd beep release the button.
How do you reset a Kwikset door knob?
A factory reset will delete all codes associated with the lock. Make sure the door is open and unlocked. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep. Press and release the program button. You will hear one short beep.
How do you use a reset button?
Using Password Reset Key is simple: Insert the key into your computers USB port. Turn on the computer. As soon as it powers on press the key for your computers boot menu (See section 8 Common Keys to Enter Boot Menu) Select to boot from USB. Let Password Reset Key boot up your computer.
How do you change the code on a Kwikset Halo?
For Aura and Halo Series of Locks Using App Open the Kwikset app. Tap the Menu icon. Select Account Settings. Select Account. Select Change Password. You will be prompted to enter your old password, then the New Password fields must be filled out.
How do you unlock a Kwikset lock code?
Programming User Codes Press the button marked “program button” once. Using the keypad, enter a 4- to 8-digit code. Press the ‘LOCK” button to save the code. Extend the bolt by pressing- the “LOCK” button. Enter the new code number. The bolt should retract.
How do I reset my electronic door lock?
First, open the door and lift off the lock’s interior cover. Press the Program button once and you should hear your unit beep five times and see its checkmark icon at the keypad’s bottom left flash five times. Press the checkmark once and then enter the master code.
How do I factory reset my Kwikset 915?
Press and HOLD the Program button while reinserting the battery pack. Release button once battery pack is installed. The status LED will flash red and green. Press the Program button once more.
How do I pair my Kwikset lock with my phone?
For Android, select (+) sign (bottom right) on the main page, select “Pair A Device”. For iOS, select (+) sign (upper right) on the main page, select “Pair a Device”. Press the “Pair a Device” on the following page. Select the brand, then the product.
What is the program button on Kwikset lock?
For most Kwikset smart locks, the program button is on the inside of the interior assembly. You may need to remove the interior cover to access the program button.
Does Kwikset Smart Key work with any key?
Answer: Each SmartKey lock can be re-keyed to any SmartKey key – if you buy two re-keying sets, you can key all of your locks to one set; if you go out of town, you can just re-key one lock in your house to a different set, then give one of those keys to your neighbor/house-sitter.
How do you reset a Kwikset deadbolt?
1 Factory Reset Open your door. Extend the latch bolt. Slide up the cover to open the back of your lock, exposing the buttons beneath. Push and hold the reset button for 10 seconds, until the lock beeps. The light ring will flash red, then spin amber. The lock has now been restored and is ready to be set up again.
How many Kwikset key combinations are there?
Schlage has approximately 80,000 different usable keys while Kwikset has about 6200 different usable keys.
Can Kwikset Smart Keys be copied?
there is no cutting of key unless you wish to duplicate the keys that come in the kit. each kit will be unique, the chances of getting 2 identical kits are the same as buying two locks with identical keys. If you have any old keys that will fit Kwikset brand, you can rekey to any key.
