Table of Contents
2 Pairing Mode Ensure the power to the speaker is turned on. Press the Bluetooth button on your Speaker. The power button will begin to flash. Your speaker is now in pairing mode and is ready to be paired with a Bluetooth audio device such as your smartphone, tablet, or computer.
How do I put my JBL in pairing mode?
Android. Go to Settings and turn on Bluetooth. In Bluetooth click “Pair new device”. When you see your JBL device come up in the list, tap it and it should be paired with your phone.
How do I fix the Bluetooth pairing problem?
What you can do about Bluetooth pairing failures Make sure Bluetooth is turned on. Determine which pairing process your device employs. Turn on discoverable mode. Make sure the two devices are in close enough proximity to one another. Power the devices off and back on. Remove old Bluetooth connections.
Why is my JBL speaker not connecting to Bluetooth?
If you have an android device, turn on Bluetooth from the Settings. Search for a new device if the JBL speaker isn’t already on the list and click on it to pair. Follow any screen prompts and your phone and Flip 3 speaker will be paired. Turn it on and locate the JBL device.
Why is my JBL speaker not connecting?
If your JBL speaker won’t connect or keeps disconnecting, chances are your device is too far away, or another device is interfering with the connection. Ensure the speaker has sufficient charge, that both devices have Bluetooth enabled, and close enough to pair. If all else fails, reset the speaker.
How do I reset my JBL Flip 4?
How To Reset JBL Flip 4 (Just 4 Steps) Turn on Speaker. Press Play and Volume+ Button Together. Press Power Button. JBL Flip 4 Reset Complete.
How do I put my Bluetooth in pairing mode?
Step 1: Pair a Bluetooth accessory Swipe down from the top of the screen. Touch and hold Bluetooth . Tap Pair new device. If you don’t find Pair new device, check under “Available devices” or tap More. Refresh. Tap the name of the Bluetooth device you want to pair with your device. Follow any on-screen instructions.
How do I force a Bluetooth device to pair?
Go to settings, Bluetooth, and find your speaker (There should be a list of Bluetooth devices that you last connected to). Tap on the Bluetooth speaker to connect, then turn the speaker on AFTER you pressed the connect button, while your device is trying to connect to it.
Why is my Bluetooth pairing rejected?
Charge up both devices you’re trying to pair Some devices have smart power management that may turn off Bluetooth if the battery level is too low. If your phone or tablet isn’t pairing, make sure it and the device you’re trying to pair with have enough juice.
Why is my Bluetooth speaker not showing up?
If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.
Why is my JBL speaker blinking blue?
see less Flashing blue indicates that your jbl device is on, using power from the battery or plugged into the wall. Alternating blue/red indicates the device is trying, or in the process of connecting to your bluetooth device. Solid blue indicate your devices are connected via bluetooth.
Why is my JBL Flip 4 blinking red?
Red blinking light means battery is very low. It could be the battery not charging try press hold power button for about thirty seconds the sound should beep then the five little lites should show and power button be blue when connected.
How do I reset my JBL Flip Bluetooth speaker?
JBL Flip 2 Reset Press and hold the Phone and the volume + buttons at the same time. Maintain this position for about 5 secs. The device will power off as it restores to the factory default. Power on your device again, and it will have restored to the factory default.
Why won’t my iPhone pair with my JBL speaker?
Make sure that your Bluetooth accessory and iOS or iPadOS device are close to each other. Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.
How do I connect my JBL Flip to my iPhone?
Find and go to Bluetooth settings. Enable Bluetooth and go to other devices. Find your JBL speaker in the list and tap on it to connect. After clicking, your iPhone will get connected to JBL speaker.
How many JBL Flip 4 Can you connect together?
While the old one could only connect two JBL speakers together, this new Connect+ button can connect up to 100. Pretty great, until you realize that you can’t connect to any previous speaker that doesn’t have Connect+.
What is the Connect button on JBL speaker?
When you choose a song, it should play through one of your speakers. To connect other speakers, find the icon that looks like an hourglass with a plus sign on your playing JBL speaker. This is your Connect button.
What is the passcode for pairing Bluetooth?
Use the code 0000 when pairing with another Bluetooth® device. The passcode may appear as Pass key, PIN code, PIN number, or Password depending on the Bluetooth device used.
What is pairing Bluetooth devices?
Bluetooth pairing is a form of information registration for linking devices. By registering device information (pairing) between devices, they can connect. To use a Bluetooth device, you must first pair it with another Bluetooth device. Pairing is a bit like exchanging phone numbers.
How do I reset my Bluetooth speaker?
First, remove all the paired devices from the speaker. Then, press and hold the Bluetooth button and the power button simultaneously for more than three seconds to reset the speaker to factory settings.
Why won’t my JBL free connect?
If both earbuds can’t be connected automatically: Put both JBL Free X back into the charging case and take it out. Then, press the buttons on both headphones for more than 5 seconds until the white and blue lights on both earbuds flash alternately.
Why is my Bluetooth connected but no sound?
Make sure that the speaker has a BLUETOOTH connection with the BLUETOOTH device. Pair the speaker with the BLUETOOTH device again. The volume of the speaker or BLUETOOTH device may be low. If a cord is connected to the AUDIO IN jack of the speaker or to the BLUETOOTH device, unplug it.
