Table of Contents
What materials can mousetrap cars be made of?
A mousetrap car is a model car made from simple materials that is powered by a mousetrap. A mousetrap car can be made from cardboard or balsa wood with CD’s for wheels and axles of wood or brass tubing. Power to drive the wheels is provided by a mousetrap to which a wand and string is attached to the snap arm.
How does a mouse trap car work?
A mousetrap car works on the principle of a lever. One end of the lever is connected to a spring. When a force is used to pull up the other end of the lever up, the spring tightens, storing energy. When the lever is released, the stored energy in the spring is transferred back to the lever, and the end snaps back.
What can you use for wheels on a mousetrap car?
As you might guess, the materials used to build mousetrap-powered cars are light out of necessity. Foamcore board or balsa wood are often used for the body. The wheels can be off-the-shelf radio-controlled car wheels, but many builders use blank CDs or DVDs because their thin edges reduce friction.
How do you make a rubber band car move?
Procedure Loop a rubber band through itself around the middle, exposed part of the wooden skewer (where you cut out a notch in the cardboard and straw). Tape the rubber band to the skewer to prevent it from slipping—when the skewer rotates, the rubber band should rotate with it.
What makes a good mousetrap car?
Use thin, light wheels. Thinner wheels have less friction and may go farther if the distance is what you want or need with your mousetrap racer. It’s also important to take the weight of the wheels themselves into account — any unneeded weight will ultimately slow your car down or lead to added friction.
How long should a mousetrap car be?
The ideal size for an ultra big wheel on a long distance mousetrap racer seams to be somewhere between 10 and 15 inches. And the ideal size for a drive wheel on a speed-trap racer seams to be between 2 and 3 inches but no more than 4 inches.
Is it better to have a lighter or heavier mousetrap car?
A heavy mousetrap vehicle will required more pulling force than a lighter mousetrap vehicle in order to achieve an equal acceleration. Lighter mousetrap vehicles will require less energy at the start and can use longer lever arms for more pulling distance.
What makes a mousetrap car fast?
A speedy mousetrap car will have smaller wheels (faster acceleration), a shorter lever arm (increased torque, but smaller travel distance), a larger axle (increased acceleration) and will generally be smaller to decrease air resistance.
Why is my mouse trap car not moving?
If a mousetrap vehicle is struggling to move and/or needs more acceleration then the lever arms can be shortened in order to increase the pulling force. Keep in mind that you will also have to reposition the mouse trap closer to the drive axle or the system will not work as intended.
What force does a mousetrap car use?
Friction is a force that acts against the motion of all moving objects. Energy is required to overcome friction and keep an object moving. Mousetrap cars start with a limited supply of energy. This energy is used to overcome friction and propel the vehicle.
What is the fastest mousetrap car?
The Speed-Trap Racer is the fastest mousetrap powered racer anywhere and was designed after Doc Fizzix’s own record-setting mousetrap racer that traveled 5 meters in 1.2 seconds.
How long should the lever arm be on a mousetrap car for distance?
For maximum speed, position the mousetrap 2 1/4 inches from the drive axle and cut the lever arm to a length of 4 1/4 inches. The lever arm can be cut using a dremel tool or by using a fine tooth hobby saw. The lever arm should always be “just” long enough to reach the drive axle or performance will be compromised.
Are CD wheels good for mousetrap car?
Mouse Trap Cars: CD/DVD Wheels. Learn more about using DVDs/CDs as wheels on your mousetrap racer. DVDs/CDs make great wheels because they can slice through the air with very little resistance. Because CDs and DVDs are some of the best wheels you will ever find for building a long distance mousetrap powered vehicle.
How do you make a balloon powered car?
Procedure Put your car down on a flat surface and give it a good push. Tape the neck of the balloon around one end of the other straw. Cut a small hole in the top of the water bottle, just big enough to push the straw through. Push the free end of the straw through the hole and out the mouth of the bottle.
How do you make a toy car move by itself?
Simply turn your soda can around and around in one direction so that the rubber bands store up some potential energy. Then, place your car on the ground and let the can go. The soda can should spin, releasing all the stored energy and moving your cardboard car! Super cool, right?May 1, 2014.
What is the best way to design a mousetrap car for distance?
Using large rear wheels allow one rotation of the axle to take the car a much further distance. In other words, a given length of the string from the mousetrap moves the car a greater distance. The last note is to place your mousetrap as close to the front of the car as possible.
Are Bigger wheels better for a mousetrap car?
By changing the size of the drive wheel(s) you can speed-up or slow-down your mousetrap vehicle. Larger drive wheels will have a greater travel distance per each turn compared to smaller drive wheel.
