Table of Contents
How do I reset my Westinghouse timer?
Press the “Plus” and “Minus” buttons at the same time to reset your timer if you want to clear all programmed settings. The Westinghouse photocell timer automatically controls up to three outdoor devices.
How do you program a Westinghouse Digital timer model 28442?
SET PROGRAM: Press the “PROG” button to enter the program setting; you will see all the days of the week on the top and “1 ON” to the left of the display. Press the “WEEK” button to set the program “1 ON” days of the week that you want the timer to function. Press the “HOUR” button to set the program “1 ON” hour.
How do you set a timer?
Timer Open your phone’s Clock app . At the top, tap Timer. Enter how long you want the timer to run. Tap Start . When your timer finishes, you’ll hear beeping. To stop the beeping, tap Stop .
How do you set a photocell timer?
PHOTOCELL ON/OFF ONLY: Remove the black nylon cap from photocell. To control the lights via the photocell set the timer by pushing all the timer tabs out to the On position. The photocell will activate the lights when it gets dark and deactivate the lights at dawn.
How do I set the timer on my Westinghouse Christmas lights?
How to Set a Westinghouse Christmas Light Timer Set the current time and date by holding the “Time” button. Set on and off times for your Westinghouse Christmas light timer by pushing the “Prog” button. Press “Prog” again. Press the “Time” button once to end programming and return to the current time.
How do you program a smart electrician timer?
How do you set a Smart Electrician Timer? First, position the “Time Now” arrow on the timer to the current time. Next, select the time you want the lights to go on. For example, 6 P.M. Press down the 6 P.M. Next, decide what time you want the lights to shut off. Then press down all the buttons in between those times.
How do you set up a photocell?
Connect one black wire on the photocell to the black wire that comes from the building. Be sure to twist the exposed copper wire so that it forms a tight connection. Connect the second black wire on the photocell to the black wire on your light fixture, making sure that the copper wire is twisted together completely.
How does a photocell timer work?
Photocell sensors work like a timer switch in that they power light fixtures off and on automatically during a set “time”. They work a little bit differently though than timer switches because photocell sensors sense the natural light of the sun for controlling artificial light output from lighting fixtures.
How does a dusk to dawn timer work?
It doesn’t matter when the sun goes down. Because photocell-activated dusk to dawn lights sense natural light, they automatically adjust for longer and shorter nights. Motion sensors keep lights turned off unless something moves nearby. Unlike many dusk to dawn lights, they don’t activate for long periods of time.
Why is my outdoor timer not working?
If your outdoor lights aren’t working, it could be due to your landscape lighting timer. First, we’d try resetting it by pressing the Reset, Restart, or R button in your transformer. If that doesn’t work then you may need a new timer.
How do you program a woods outdoor timer?
Setting the Program – After clock is set press the HOUR button to the time you want the timer to activate, push PROGRAM button to set auto-on-time. Set the End Time – while “E” is flashing push the HOUR button to the OFF time, push PROGRAM button to set auto shut-off time (around daily departure).
How do you program a Westinghouse outlet remote?
Push and HOLD the same button for about 3-5 seconds, you should see the LED on the base start blinking slowly. On the Remote, push the ON button and wait 2 seconds. Push the OFF button on the Remote, and you should see the LED on the base stop blinking. The remote should now be paired with the base.
How do I reset my outdoor light timer?
How to Reset an Outdoor Lighting Timer Locate the “Reset,” “Restart” or “R” button on your timer. Press and release the button to clear the timer’s programming and return it to factory settings. Set the time on your timer. Set a lighting program for your outdoor timer.
How do you set a digital timer on an outlet?
To set the time for Digital Timer to turn “ON”: Insert the plug of the lamp or appliance into either of the outlets on the sides of the Timer. Press PROGRAM to begin. The Timer will display “1 ON”. Press HOUR, MIN and WEEK to set the hour, minute and day of the week that you want the Digital Timer to activate.
How do you program a woods block heater timer?
Plug in timer to program; unplug to erase settings. After current time is set, P will flash to set time for block heater to start each day (3 hours before commute is ideal). Push the HOUR button to advance and PROGRAM to set. Flashing E prompts to set time for block heater to shut off at your daily departure time.
How do you program a Woods III timer?
Step 1: Access the On/Off Setting. Press the PROG button once. Step 2: Set the Desired Time. Press the minute and hour buttons as necessary, to the desired time. Step 3: Change the Day Setting. If needed, press the DAY button to choose the day or group of days that you want. Step 4: Repeat. Step 5: Exit This Mode.
How does a dusk to dawn photocell work?
Some dusk to dawn lights use a photocell as a source of their power. Photocell lights are activated by the changing of natural light, which means that they automatically shift with daylight changes and adjust when the nights are longer or shorter. Some photocell outdoor lights also contain motion sensors too.
