Table of Contents
How long do you leave cup on Turner after epoxy?
Once all epoxy is on the cup keep the cup spinning. Wait about 5-10 minutes and carefully (and with gloves still on) remove the tape from both the top and bottom. If you leave the tape on you’ll end up sealing it under the epoxy layer. Let the tumbler turner spin the cup slowly for 6-8 hours.
Can I leave my cup Turner on overnight?
Yes, I leave mine running overnight and have had no problems. It stays cooler than the other turner I have.
How fast should a cup Turner turn?
Crafterr Cup Turner It’s a stable device, featuring a properly anchored wand that turns at a smooth and steady 5–6 rpm, a base with anti-slip feet, and two high-density foam holders that fit snugly in cups of various sizes up to a standard 30-ounce tumbler.
How long do you leave your cup on the Turner?
Tumbler should be on a hand turner or cup turner. Apply epoxy, smoothing it up and down the tumbler while you rotate it slowly. See videos in post for full instructions. Continue rotating for 4-6 hours depending on temperature.
How many layers of epoxy should I put on a tumbler?
It does depend on what you’re creating, but the average is 2-3 coats. To properly seal all the layers beneath, we recommend using a topcoat of your resin. For a sparkling finish, you can mix in glitter from our friends at Alumilite to realize your epoxy glitter tumbler vision.
How do you keep vinyl from peeling off tumblers?
Before you start, make sure your stainless steel tumbler or mug has been cleaned and dried. And clean the cup with rubbing alcohol. This helps to remove any remaining grease or residue that will prevent the vinyl from adhering properly. Let the vinyl cure on the cup for 48-72 hours to make sure it sticks well.
Can you use Mod Podge instead of epoxy?
Paper Mod Podge does all that wonders for you. It works as a sealant to your projects, you can gluwork your project with some classic mod podge and then use the Super Gloss over the top. So it gives you a very shiny, clear finish that looks like epoxy.
What kind of motor do you use for a cup Turner?
Synchronous Synchron Motor Turntable Motor Electric Synchron Motor For Cup Turner,cuptisserie,Tumbler Cup Rotator with 7mm Flexible Coupling 100-127VAC 50/60 Hz 4W 2.5-3RPM/MIN CCW/CW.
What is a foam cup Turner?
High Density – the cup turner foam is made of high density foam, more steadier than foam strip and foam football, snugly on the bearing ,keep your cup never drop. Unique porous design – The porous design keeps the sponge elastic, making it easier to fit into the cup.
How do you fix uneven epoxy at the bottom of a tumbler?
An uneven hardening of your epoxy resin can lead to dull, or even tacky spots. To fix an uneven epoxy finish, wait until the epoxy has dried thoroughly, and then sand it lightly with fine-grained wet sandpaper. After this, make sure to wipe down the surface, so it is entirely free of any sanding dust and other debris.
Can you put epoxy over vinyl decals?
Sealing a wooden tray You can go ahead and paint it or spray paint it but just be sure to give it a really long time to dry before applying the vinyl. With a tray like this with vinyl on it, I would definitely recommend doing an epoxy resin. It’s so easy, relatively affordable and they last a long long time.
Do you have to use epoxy on tumblers?
There you have it! A way to make a decorated Yeti cup or Ozark tumbler without having to use epoxy. As you can see from the pictures, it’s not as smooth as epoxy but it still works and actually has a nice texture to it!.
Can you epoxy over a powder coated tumbler?
The powder coating that I’m accustom to working with is a pretty inert coating and should be ok under epoxy as long as the powder coating is in good shape and adheres well to the surface. You would need to clean and prep it just like you would anything else you wanted to prime and paint.
Can I make an epoxy tumbler without Turner?
How do you use a tumbler cup Turner?
Place your cup turner on your work surface. Tape off the plastic lip of the tumbler ( and base if necessary. ) Spray paint the tumbler if desired. Insert the pointed end of the spit rod into the foam football, then insert into the tumbler, pushing the football and rod down to the bottom of the cup.
Should you sand between coats of epoxy?
First, sand down the entire surface of your piece with coarse sandpaper ( we use 80 grit sandpaper here at ArtResin ). Sanding epoxy resin between coats will not only get out the imperfection, but will also serve to provide some tooth between the first and second layers.
How long do you wait between coats of epoxy?
Depending on the epoxy you’ve chosen to work with, you’ll have to wait between 4 and 24 hours before applying your second coat. Be sure to read your directions very thoroughly before beginning your project.
Why is my vinyl not sticking to Cup?
Still having trouble? If you have cleaned your surface well with rubbing alcohol but your vinyl is still not sticking, try leaving the transfer tape on the vinyl for a bit after applying it onto the surface. Sometimes the vinyl’s adhesive needs time to adhere to the surface a little better and bond.
Do you need to seal permanent vinyl on tumblers?
I do not seal my vinyl on tumblers. Most vinyl manufacturers actually recommend that you don’t apply a sealer over the vinyl. The exception to this would be if you want to go through the process of sealing your tumbler with epoxy. This is usually done with glitter tumblers.
Can you use Mod Podge to seal vinyl on tumblers?
Just adding vinyl to mugs and wish they would last a little longer? Mod Podge is probably your safe bet, just don’t put them in the dishwasher.
