Table of Contents
Where do you put a glass break sensor?
Glass break sensors should be placed between 4 feet and 20 feet of the windows they are trying to protect. The best alarm companies are committed to providing you with the protection and peace of mind you deserve. Adding one or more wireless glass break sensors to your system could be the right call for your home.
Do SimpliSafe detect glass break sensors work?
Engineered with precise sound detection to tell the difference between an intruder smashing a window or a plate breaking. Setup is a Snap. Place it in the room you want to monitor and ‘Add Device’ with your SimpliSafe keypad.Product information. Product Dimensions 2.13 x 1.6 x 2.13 inches Manufacturer SimpliSafe.
Where does the SimpliSafe glass sensor go?
Glassbreak Sensors are programmed to listen for the specific frequency of broken glass. They should be installed within twenty feet of the windows you want protected. However, if you have windows with heavy curtains we recommend installing your Glassbreak Sensors 5-10 feet away from your windows.
Do I need entry sensors on every window?
Motion detectors will need to be placed in specific zones of your home, while window sensors should be placed at every window. Your hallways, bedrooms, and living rooms might have motion detectors installed, while your outer windows may have both contact sensors and glass break sensors installed.
Does every room need a glass break sensor?
How many glass break sensors do I need? You don’t necessarily need a glass break sensor for every window on your ground floor. With professional installation, a single acoustic glass break detector can cover several windows and glass doors in a room, maybe even all of them, depending on the room’s size.
Is a glass break sensor worth it?
Glass break sensors are unique and very useful additions to any home security system. They are cost-effective and can deter a burglar before they do additional damage. Consider getting one if you don’t have these tools already—a glass break sensor could be the final piece to complete your home security system.
What is the range of SimpliSafe glass break sensor?
Act fast against burglaries with this SimpliSafe glass break sensor. It triggers an alarm if it detects the sound of shattering glass within its 20-foot range, providing reliable security even when no motion detector is used.
How do you install a SimpliSafe sensor?
Take your entry sensor and pull off the battery tab. Remove the backing from your sensor’s adhesive strip. Remove your sensor from the backplate by sliding it in the direction of the blue arrow. Screw the backplate to the wall, using the 2 large screws. Slide the sensor back onto the backplate. Now take your magnet.
Do SimpliSafe entry sensors work on Windows?
The Original Entry Sensors are designed to work on almost any window or door, including double-doors, double-hung windows, and swinging or sliding doors and windows. Here are a few example installations for your home security system Entry Sensors.
How many glass break sensors are needed?
Unlike a door or window entry sensor, which triggers when the two parts of the detector move apart, a glass break sensor monitors audio frequencies. In short, it recognizes the sound of breaking glass. One sensor can cover multiple square feet of space, so one glass break detector per room is usually sufficient.
How do you remove a SimpliSafe sensor from the wall?
To remove a sensor from your system: Open the Menu on your keypad (using your Master PIN) Select “Devices” and navigate to the device you’d like to remove. Select it with the right rocker. Scroll to the bottom of the sensor’s listed settings and select “Remove”. Press “Off” to exit the menu.
How do you remove SimpliSafe sensor glue?
The Entry Sensor magnet uses a slightly different adhesive than the other sensors. Remove the magnet by rotating the magnet slowly until the adhesive loosens and you can pull it off the wall.
How does the glass break sensor work?
Glass break detectors complement door and window sensors by monitoring sound or vibration. When they detect the frequency or shock waves associated with glass shattering, they sound an alarm.
How do you test a glass break sensor?
In order to test your glass break sensor, you need a high-pitched sound to simulate the noise. If the correct sound is not made, the sensor may not register it, which could lead to concern that it is not working when it actually is working perfectly. Thankfully, there is no need to break any glass.
How high should I mount my SimpliSafe motion sensor?
The ideal location for a Motion Sensor is in the corner of a room, and 4-5 feet off of the ground for maximum coverage. Motion Sensors are designed to be placed on the edge of a flat surface as well if a corner or wall are not available.
Are window sensors worth it?
Glass break detectors and motion sensors are great additions to a home that is protected by door and window sensors. Because door and window sensors will only activate an alarm if the actual door or window is opened, even a house that has every door and window contacted is still not fully protected.
Will house alarm go off if window is broken?
Even if they’re home and notice the sound of crashing glass, they’re unlikely to investigate. If you’re concerned about an intruder coming in through a window, your security system needs to have a sensor that will detect broken glass. Ramp up the protection of your home with an updated home security system from Vivint.
Can I leave a window open with SimpliSafe?
“Your SimpliSafe will warn you that a window or door is open when you turn the alarm on. Open doors or windows will not be protected until they are closed. It will arm the system, but will exclude the open door/window.
Can a dog bark set off a glass break sensor?
Glass break sensors are activated by a certain decibel of noise. Some dogs can cause a glass break to send an alarm by barking. If you have more hard surfaces in your home, such as hardwood floors, the noise carries and magnifies, making your sensor more likely to be set-off.
How do I test my SimpliSafe glass break sensor?
Glassbreak Sensors: Press Test Button on the top of the sensor. Clap your hands loudly near your windows. Glassbreak sensors will respond to any loud sound in Test Mode (whereas normally they only respond to breaking glass).
