Table of Contents
Gutter hooks or decorating clips. To hang string and rope lights, you’ll want to use outdoor decorating clips that are suitable for string lights to hang them between a series of fixed points. Decorating clips can be stuck onto wooden and uPVC surfaces, such as door frames, gutters and fascias.
How do you hang string lights on a fence?
Attach metal mounting hooks or cup hooks onto the wooden posts. These hooks will hold your string lights so you want to be sure that you secure them firmly. Screw your mounting hooks or cup hooks into the wooden posts at one end. Install the posts onto your fence to support your lights.
How do you hang lights on a fence without nails?
One of the ways to hang outdoor patio lights without nails is using adhesive hooks or gutter hooks. Alternatively, you can tape or staple them to your wall. You can also hang them on trees, bushes, posts, potted plants, and your fence. Another way to brighten up your patio is by using lanterns.
How do you hang Christmas lights outside without nails?
How to hang string lights outdoors without nails? The easiest method is to use plastic hooks and clips. They are inexpensive, easy to install and remove and hold all types of Christmas lights with ease.
How do you hang string lights in your backyard?
Hang your first patio light string with the male plug closest to your outlet. Use zip ties or hooks between each bulb as needed on deck railings or other structures. If applicable, attach the strings to your guy wire as you go.
How do you hang lights without tape or nails?
Luckily there are a number of alternative ways to hang or display fairy lights. Drawing Pins. Blu-Tack. Wrapping around household objects. Wire Suckers. Damage-free Adhesive Hooks.
How do you hang outdoor lights on concrete?
If you prefer, put concrete around the post almost to the top of the container. Let it dry and cure. Then sit small, potted plants on top of the concrete. Use a ladder to drape the lights over the hooks at the top of the posts or attach them to the hooks with twist ties.
How can I hang Christmas lights outside without holes?
To hang Christmas lights with adhesive hooks: Smooth exteriors, like aluminum siding, will accept adhesive hooks. Buy enough adhesive hooks to secure light strings every 6 to 8 inches. Remove the backing on each hook and stick it into place. Hang your Christmas lights once the hooks are installed.
How can I hang Christmas lights without clips?
Purchase S-shaped gutter hooks at the home improvement store, and hang them up by pressing the top part of the S into the gutter, with the rest of the hook resting on the front. When you’re ready to hang the lights, simply use the bottom part of the S as a hook and string the wire of the lights into each hook.
How do you hang string lights in your backyard without trees?
7 Ways on How To Hang String Lights in Backyard Without Trees Hanging Lights on 4X4 Posts. Using Metal Pole and PVC. Along the Fence Lighting. Deck Lighting. Gazebo or Pergola or Covered Patio String Lights. String Lights on Umbrella. Use Planters to String Backyard Lights.
How do you hang string lights on a patio?
Step 1: Select Anchor Points. Lay string lights around the perimeter of your deck. Step 2: Install Screw Eyes. Predrill holes into the wood structural supports in your marked locations. Step 3: Attach String Lights with Carabiners. Step 4: Install Light Bulbs. Step 5: Attach String Lights to Power.
How do you hang string lights without holes?
Using Hooks If you can’t repurpose your backyard to hang the lights, then the next best option is to go with adhesive hooks. They can be bought at any hardware store and allow you to hang lights without leaving nail holes in your walls.
Can you use Scotch tape to hang Christmas lights?
Avoid Taping Christmas Lights to Your Home Scotch or duct tape may seem like the easiest method for hanging holiday lights, but universal clips are a better choice for outdoor light jobs since, unlike tape, they won’t retain moisture near your electric lights.
How do you attach rope lights to concrete?
How to Install Rope Lights on Concrete Lay the rope lights against the concrete where you want to install them. Attach the cable clamps to the rope lights between light bulbs. Drill a small hole into the concrete on each marked spot. Hold the cable clamp against the drilled hole and drive the screws into the concrete.
How do you hang patio lights without stucco?
Use Adhesive-Backed Hooks Just like with gutter hooks, adhesive-backed hooks can help you hang outdoor lights without using nails or drilling holes. However, you don’t hang these off the lip of a gutter or other surface. Instead, you either peel the back or apply adhesive to the hook and pin it onto a flat surface.
How do you hang Christmas lights without damaging wood?
Whenever possible, use plastic clips when hanging Christmas lights. There are a variety of plastic clips that work by clipping onto the gutters, shingles or eaves of your home without damaging your roof. There are clips available for specific roof systems and Christmas lights.
How do you hang lights with nails?
Use nails, thumb tacks, or clear wall hooks to hang the lights up. Match the color of the nail or thumb tack to the color of the wire. Drive the nails or thumb tacks between the twisted wires. Never drive them through the wires.
How do you hang Christmas lights on siding?
OPTION 1 – Siding Hook This is the most efficient method. Slip the top of the hook underneath a piece of siding and wiggle it until it “snaps” into place. This hooks it onto the bottom of the siding. Then hang your decorations on the bottom of the hook.
What are the clips on Christmas lights for?
Designed to hold empty socket light line, stringers, and specialty strings such as icicle lights, Christmas light clips come in many different sizes and shapes.
What is Vampire plug?
Vampire Plugs: The Unsung Heroes of the Christmas Light Industry. Vampire plugs, sometimes called Gilbert plugs, are comprised of a small plastic housing, a slide-on piece designed to hold in the wire, and either a male or female plug end.
How do you secure Christmas lights to wood?
Rather than use unsightly tape to attach the lights, try a number of other connectors that can discreetly hang them. Screw 1/2-inch cup hooks into the underside of the wooden table. Slide all-purpose plastic Christmas light clips onto the table apron. Clean the underside of the wooden table with rubbing-alcohol.
