Table of Contents
To scale a sketch: In an active sketch, click Modify Sketch. (Sketch toolbar) or Tools > Sketch Tools > Modify. In the dialog box, under Scale About, select one of the following: Option. Description. Sketch origin. Type a value for Factor, and press Enter. You cannot scale a sketch that has external references. Click Close.
How do I scale a design in Solidworks?
Scaling a Part In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager. Click. The geometry of the model increases or decreases in size according to the scaling factors and other options you set. The Scale feature scales only the geometry of the model.
How do you enlarge a drawing in Solidworks?
You can change the scale of a drawing sheet by selecting a scale from a predefined list or specifying a custom scale. To change the scale of an existing drawing sheet: In the status bar, click Sheet Scale and click a scale. If there are annotations in the drawing sheet, specify options in the dialog box and click OK.
How do you scale up or down in Solidworks?
In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager. The geometry of the model increases or decreases in size according to the scaling factors and other options you set.
How do you scale a model?
Divide the real life dimension of either length or width by that of the model. So, say the real life object had a length of 55m, and the model had a length of 50 cm, or 0.5m, then do 55/0.5. This is equal to 110.
Can you scale a SOLIDWORKS assembly?
To scale an entire SOLIDWORKS assembly, it is possible to scale each part independently, however this could be extremely tedious for an assembly with a large number of components. Alternatively, you can save the assembly as a multi-body part and scale this part in a single step.
How do I stretch a sketch in Solidworks?
Stretching Sketch Entities Click Base point. and then click on the sketch to set a base point. Drag to stretch the sketch entities. When you release, the entities stretch to that point and the PropertyManager closes.
How do you find the scale of a drawing?
The scale is shown as the length in the drawing, then a colon (“:”), then the matching length on the real thing. Example: this drawing has a scale of “1:10”, so anything drawn with the size of “1” would have a size of “10” in the real world, so a measurement of 150mm on the drawing would be 1500mm on the real horse.
How do you measure in Solidworks?
Click Measure (Tools toolbar) or Tools > Evaluate > Measure. When you select a vertex or sketch point, the x, y, and z coordinates are displayed. When the Measure tool is not active, commonly-used measurements for selected entities appear in the status bar. Select to specify custom measurement units and precision.
How do you change the size of a part in Solidworks?
To change a dimension: Double-click a dimension. The Modify dialog box appears. Change the dimension value with the arrows, thumbwheel, mouse wheel, or by typing in the dimension box.
Where is the Features toolbar in Solidworks?
To display SOLIDWORKS toolbars: Right-click in the window border and select or clear a toolbar name. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.
How do you scale blocks?
To Ensure Uniform Scaling in a Block Reference Click Drafting tab > Block panel > Block Editor. Open the block definition in the Block Editor. In the Block Editor, make sure nothing is selected. In the Properties Inspector, under Block, click Scale Uniformly. On the drop-down list, select Yes.
How do I edit a block in Solidworks?
To edit a block: Right-click the sketch and select Edit Sketch. Expand the folder to display the blocks. Select a block and click Edit Block. Make changes to the block, and click the block confirmation corner.
How do you scale a size?
To scale an object to a larger size, you simply multiply each dimension by the required scale factor. For example, if you would like to apply a scale factor of 1:6 and the length of the item is 5 cm, you simply multiply 5 × 6 = 30 cm to get the new dimension.
How do you calculate scale size?
For example, if the scale factor is 1:8 and the real measurement is 32, divide 32 ÷ 8 = 4 to convert. To convert a measurement to a larger measurement, simply multiply the real measurement by the scale factor. For example, if the scale factor is 1:8 and the measured length is 4, multiply 4 × 8 = 32 to convert.
How do you make a scale?
Creating a Scale Map Find a map of an area you want to use. Find both the actual and measured distances of two points on your map. Divide the actual distance by the measured distance on the map for your scale. Place your scale numbers on the map.
How do I change the scale in Solidworks 2020?
Setting Custom Scales for Drawing Views In a drawing, select an existing view or insert a new view. In the PropertyManager, under Scale, select Use custom scale. In the box, enter a scale in the format x:x or x/x . You can also click and select a predefined scale from the list.
How do you scale a part in an assembly?
Open the newly saved multi-body part. Access the Scale tool (Insert, Features, Scale). Select all of the solid bodies in the part to be scaled. Choose the Scale Factor and other options as desired (for best results with a multi-body part, scale about the Origin).
How do you scale an assembly in Solid Edge?
Solid Edge-How to Scale a Part Once you have saved the original part. In the blank part document select “Part Copy” which can be found in the Clipboard. Select your part from the file location. The Part Copy Parameters dialogue box appears. Towards the bottom you will see where you can scale the part.
How do I use the Deform tool in Solidworks?
To open the Deform PropertyManager with Surface Push options: Click Deform on the Features toolbar, or click Insert > Features > Deform. In the PropertyManager, under Deform Type, select Surface Push.
