Table of Contents
Where is the shell tool in Solidworks?
So the shell command is under the feature tab, and come down here to Shell.
What is shell command in Solidworks?
The shell tool hollows out a part, leaves open the faces you select, and creates thin-walled features on the remaining faces. If you do not select any face on the model, you can shell a solid part, creating a closed, hollow model. You can also shell a model using multiple thicknesses.
What is fillet in Solidworks?
Fillet/Round creates a rounded internal or external face on the part. You can fillet all edges of a face, selected sets of faces, selected edges, or edge loops.
How do you make a multi thickness shell in SolidWorks?
Shell with Multi-Thickness Faces Click in Multi-thickness Faces , then select the faces in the graphics area for which you want to set a thickness that is different from the Thickness under Parameters. Select a face in Multi-thickness Faces , then set Multi-thickness(es) to set the thickness for the selected face.
What is loft in SolidWorks?
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. For a solid loft, the first and last profiles must be model faces or faces created by split lines, planar profiles, or surfaces.
How do I use the wrap feature in SolidWorks?
Wrap Select the sketch you want to wrap from the FeatureManager design tree. Click Wrap on the Features toolbar, or click Insert > Features > Wrap. In the PropertyManager, under Wrap Type: If you select Emboss or Deboss , you can select a line, linear edge, or plane to set a Pull Direction . Click OK .
How do I draft in SolidWorks?
To draft a model face: Click Draft (Features toolbar) or Insert > Features > Draft. Set the options in the PropertyManager. Click Detailed Preview to preview the draft. Click OK .
What is the shell feature used for?
The Shell feature hollows out the inside of the solid, leaving a shell of a specified wall thickness. It lets you specify a surface or surfaces that you want to remove from the shell.
How do you draw a cylinder shape in SolidWorks?
To Draw a 3D Cylinder: In the horizontal menu bar at the top, click the button that shows a circle. In the drawing area, click the cursor once on the origin to drawing a circle. Drag the mouse and then click to create the desired circle.
How do you make a rib in SolidWorks?
To create a rib: Sketch the contour to use as the rib feature on a plane that intersects the part, or is parallel or at an angle to an existing plane. Click Rib (Features toolbar) or Insert > Features > Rib. Set the PropertyManager options. Click OK .
How do I get my solidworks toolbar back?
To display SOLIDWORKS toolbars: Right-click in the window border and select or clear a toolbar name. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.
What does thin feature do in Solidworks?
The thin feature allows you to cut in one direction, from the midplane, or in two separate directions. Cutting in one direction allows you to cut to either side of the sketch at a determined distance. Cutting from the midplane will allow the cut to be spaced equally on both sides of the sketch.
What is the difference between a fillet and a chamfer?
A chamfer is the sloped or angled edges or corners of a part design. It is an antonym of the fillet. Instead of having a curved shape, a chamfer is straight and has a sharp angle. If your design requires sharp corners to be efficient for its purpose, you should choose chamfer over the different fillet mechanics.
How do I make walls thicker in Solidworks?
Click Thicken on the Features toolbar, or click Insert > Boss/Base > Thicken. Examine the preview, and select the side of the surface you want to thicken, as shown below. Enter the Thickness . Note that when you select Thicken Both Sides , it adds the Thickness you specify to both sides.
How do you create an offset plane in Solidworks?
Click . You can also Ctrl + drag an existing plane to create a new plane that is offset from the existing plane. To change the names for construction planes in the current document, click-pause-click the plane’s name in the FeatureManager design tree and type a new name.
How do you loft a line in Solidworks?
Loft with Split Line Lofted Boss/Base (Features toolbar) or Insert > Boss/Base > Loft. Lofted Cut (Features toolbar) or Insert > Cut > Loft. Lofted Surface (Surfaces toolbar) or Insert > Surface > Loft.
What is wrap feature?
About the Wrap Feature. Use the Wrap tool to drop a sketch onto geometry and then wrap the sketch around geometry to create a formed datum curve. You can then use the formed curve to create items such as labels or screw threads.
What is pull direction in wrap solidworks?
For a line or linear edge, the pull direction is the direction of the selected entity. For a plane, the pull direction is normal to the plane. Pull direction – Plane A. Pull direction – Plane B. To wrap the sketch normal to the sketch plane, leave Pull Direction blank.
How do I draw a hole in Solidworks?
To create and position a simple hole: Select a planar face on which to create the hole. Click Simple Hole (Features toolbar) or Insert > Features > Hole > Simple. In the PropertyManager, set the options. Click OK to create the simple hole.
How do I thread a hole in Solidworks?
Start by creating a cylindrical extrusion or cylindrical hole, much like the initial steps to of making a cosmetic thread. The feature size should be the same as the nominal thread diameter. From there, select the starting edge. Then, click “Insert” then “Feature” and “Thread.” This will automatically create a thread.
How do you draft out in Solidworks?
To draft a model face: Click Draft (Features toolbar) or Insert > Features > Draft. Set the options in the PropertyManager. Click Detailed Preview to preview the draft. Click OK .
