Table of Contents
Method 1: Do some basic troubleshooting The mic on your HyperX Cloud 2 headset may be muted or not connected correctly. So it’s worth checking the mute setting and the connection of your headset. 1) If you are using the USB switcher of your headset, check to make sure that the mute switch hasn’t been activated.
How do I fix my HyperX headset not working?
Troubleshoot the HyperX headset microphone Right-click the Speaker button on the bottom right side, and choose Open Sound Settings. Under Input, choose the right input device (HyperX Cloud Alpha) and click Troubleshoot. Follow the on-screen instructions and wait till this gets finished.
Why are my headphones not working but my mic is?
If the mic works in the other headphone jack, it suggests this issue is probably caused by a faulty port. If your mic still doesn’t work, connect your headphone with a microphone to another device. If your mic does not work in another PC or smartphone you should contact the vendor of your microphone device for support.
How come my headset isnt working?
Dust, lint and dirt may block the connection between the jack and the headphones. Check for this and clean the jack using a cotton swab damped with some rubbing alcohol to get the lint and dust out, or use a can of compressed air if you have one close by. Plug the headphones back in and see if they work.
What is the 7.1 button on HyperX?
When you press the 7.1 button in the middle of the controller, it should glow red. This means its on, and when you press it again, the LED will turn off, and it will go back to stereo sound. Try playing a game and pressing the button, you should be able to hear a noticeable difference.
How do I fix my HyperX mic?
Solution 1: Check Your Sound Settings Step 1: Open Control Panel. Step 2: Select Large icons from the View by drop-down menu. Step 3: Switch to Recording tab. Step 4: Right-click the Headset Microphone and choose Enable. Step 5: Then you need to click Apply and OK to save the changes you have made.
Why is my Razer headset mic not working?
The mic on your Razer Kraken headset won’t work if you’re using an incorrect or outdated audio or headset driver. So you should update the driver to see if that fixes the issue. You can update your driver manually or automatically. Updating your driver automatically, on the other hand, is very easy.
Why is my mic not working?
Go to the sound settings of your device and check if your call volume or media volume is very low or mute. If this is the case, then simply increase the call volume and media volume of your device. As mentioned earlier, dirt particles can accumulate and easily clog the microphone of your device.
Does HyperX work on PC?
The HyperX Cloud II supports 7.1 surround sound. You can use the control box to connect to a PC or PS4 and enjoy the 7.1 surround sound using the HyperX Cloud II headset. You can also plug the headphones into a 1/8″ headphone plug into a headphone jack to listen to stereo sound.
Do HyperX headsets have software?
HyperX NGENUITY is a powerful and intuitive software that will allow you to personalize your compatible HyperX products. The software also comes with a library of presets, so you can quickly choose one to install and jump straight into the action.
How do I get my headphones to work again?
When your headset is playing only in one ear, rule out possible device setting issues then follow these quick fixes to get your earphones working again.Ruling Out Phone or PC Settings Try another pair of earphones. Restart the device. Check the settings. Clean the headphone jack.
Why can I talk through my headset but not hear?
Make sure your audio source is on and the volume is up. Make sure the headphone jack is firmly plugged into the correct audio jack. If the audio source uses a line remote, disconnect the remote and plug directly to the audio source. If you can hear the sound from your headphones, the line remote may require repair.
Does HyperX Cloud 2 have 3.5 mm Jack?
It’s no wonder that it’s become the preferred gaming headset for millions of gamers.Specifications. Headset Cable length and type: 1m + 2m extension Connection: single mini stereo jack plug (3.5 mm) Microphone Transducer type: condenser (back electret).
Is 7.1 surround sound real?
➢ 7.1: This is the complex surround sound setup. It uses an overall of seven speakers with a subwoofer and all this creates an immersive surround sound experience.
Is surround sound good for gaming?
Surround sound is great for gaming because it not only makes it easier to detect where other players are but it also improves the cinematic experience. Most modern games are designed to take advantage of surround sound audio.
How do I unmute my HyperX headset?
The audio control box contains a volume dial to adjust the headphone output volume and a microphone mute slider to mute the microphone output. To increase the volume of the headset, rotate the volume wheel towards the + sign (anticlockwise). To reduce the volume, rotate the volume wheel towards the – sign (clockwise).
Why does my HyperX mic sound bad?
the problem turned out to be the bitrate for the mic was set to the lowest possible option in windows. it was set to telephone quality, setting it to dvd quality completely fixed the issue.
How do I get my Razer mic to work?
Enable microphone access on apps Click Start > Settings > Privacy > Microphone. Allow the access of microphone. Click the toggle button under “Microphone” to allow access on all apps. Choose specific applications where you want the microphone to be enabled.
How do I fix my Razer mic?
Solution 2 – Check if the Mic is active Right-click on the “sound” icon present at your taskbar and select “Properties”. Now, choose the “recording” tab. Then, disable all the other microphones from your computer. Press Apply to save changes. Now right-click on the microphone and select “Properties”.
Why is my Razer BlackShark headset mic not working?
It’s possible that your Razer BlackShark V2 is not set as the default device, thus causing the mic not working issue. 2) Go to the Recording tab, and make sure your Razer Blackshark V2 is set as the default input device. If not, you can right-click your headset, and select Set Default.
