Table of Contents
Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.
How do you create a revolve in SolidWorks?
Create a new 2D sketch. Create all solid sketch geometry on one side of the axis. Choose Revolve Boss/Base from the features menu. Pick the axis you wish to use for the revolve. Specify direction and angle. Accept the Feature.
How do you do a revolved cut in SolidWorks?
Creating Extruded or Revolved Cuts as Assembly Features Open a sketch on a face or plane, and sketch a profile of the cut. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Extrude or Revolve PropertyManager.
How do you use the revolve feature?
There are several ways to activate the Revolve tool: Click Model > Revolve and create a sketch to revolve. This method is referred to as action-object. Select an existing sketch and then click Model > Revolve. Select a datum plane or planar surface to use as the sketching plane and then click Model > Revolve.
Can you revolve a 3D sketch in SolidWorks?
With the Selected Contours pointer (available when you click Selected Contours in the PropertyManager), you can select one or more intersecting or non-intersecting sketches to create the revolve. The Axis of Revolution can be a 3D sketch.
Where is revolve in Solidworks?
Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
How do you make a revolve?
Place an axis of revolution: On the Modify | Create Revolve tab Draw panel, click (Axis Line).About revolves Click Modify | Create Revolve tab Draw panel (Boundary Line). To create a single revolve, sketch a closed loop. To create more than one revolve, sketch multiple, non-intersecting, closed loops.
How do you make a revolve cut?
You add a revolved cut by sketching a closed two-dimensional cross-section and a construction line on a selected face. The construction line serves as an axis of revolution, and Abaqus/CAE creates the revolved cut by rotating the cross-section about the axis using a specified angle of revolution.
What is boundary cut in SolidWorks?
A Boundary Surface can be used instead of a Filled Surface for a more controllable transition between faces. A Boundary Cut is created in the same way as a Boundary Boss/Base, but the volume of the feature is removed.
How do you make a groove on a cylinder in SolidWorks?
To create a groove: Select a cylindrical face on a part where you want to place the groove. Click Grooves (Toolbox toolbar) or Toolbox > Grooves . In the Grooves dialog box: Select a standard, groove type, and available groove size from the lists on the top left of the tab. Click Create.
What is revolve in SolidWorks?
Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.
What is revolve command?
The Revolve command in AutoCAD 3D is used to create a 3D solid or surface by sweeping the object through its axis at a predefined angle. The paths and objects that can be revolved are: Planar. Non-planar.
Can I Extrude a 3D sketch in Solidworks?
This is a followup post to episode 92 when I discussed 3D sketches in SolidWorks. As I mentioned, many people don’t realize that you can extrude or cut with a 3D sketch as long as it is closed and it has a vector direction to extrude along.
How do you make something 3D in Solidworks?
Beginning a 3D Sketch Click 3D Sketch (Sketch toolbar) or Insert > 3D Sketch to open a 3D sketch on the Front plane in Isometric view. Select a plane and then click 3D Sketch on Plane (Sketch toolbar) or Insert > 3D Sketch on Plane to add a 3D sketch in Normal to view.
How do I make a sketch in Solidworks?
Creating New Sketches with Existing Sketches Do one of the following: Click a plane, face, or edge to add a new sketch, or click Extruded Boss/Base or Revolved Boss/Base . If you clicked Sketch. Create the sketch, and dimension the sketch entities. Exit the sketch, or click Extruded Boss/Base or Revolved Boss/Base.
How do you use revolve Extrude in SolidWorks?
To create an assembly feature cut: Open a sketch on a face or plane, and sketch a profile of the cut. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Extrude or Revolve PropertyManager.
What is extruded boss in SolidWorks?
The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.
Why can’t I revolve SolidWorks?
Unless you’re creating a Thin Feature Revolve then SolidWorks can only Revolve a closed profile. This means that you need to have no gaps or breaks around the outside of your profile. Make them solid by selecting them, then unchecking the ‘For construction’ box on the left.
What is the Revolve tool in Onshape?
When Revolve Solid is selected at the time a sketch is open, Onshape automatically selects all the closed regions in the sketch. Select a line, cylindrical edge, or arc to revolve around an axis, or Mate connector (inferred or existing).
How do you draw a semi circle in Solidworks?
In outlined form, here are our steps: Select a sketch plane (such as the Front Plane) Sketch a semicircle. Go to the Features tab on the CommandManager. Select “Revolve Boss/Bass” Select the line in the semicircle as the axis of revolution. Specify your revolution amount, then press the green check to generate the sphere.