Table of Contents
To add bodies together: Click Combine. (Features toolbar) or Insert > Features > Combine. In the PropertyManager, under Operation Type, select Add. For Bodies to Combine, select the bodies to combine. You can select bodies in the graphics area or the Solid Bodies. Click Show Preview to preview the feature. Click .
How do you mate two parts in SolidWorks?
Simply hold down Ctrl and select the two entities you wish to mate. The supported mate types are all standard mates (Concentric, Coincident, Equal, etc), as well as some advanced mates (Profile Center, Symmetric and Width) and some mechanical mates (Cam and Slot).
Where is the combine feature in SolidWorks 2020?
In the Combine PropertyManager, you specify which bodies in a multibody part to add, subtract, or overlap. (Features toolbar) or Insert > Features > Combine . You can only combine bodies contained within one multibody part file.
How do you merge bodies in Solidworks?
To add bodies together: Click Combine. (Features toolbar) or Insert > Features > Combine. In the PropertyManager, under Operation Type, select Add. For Bodies to Combine, select the bodies to combine. You can select bodies in the graphics area or the Solid Bodies. Click Show Preview to preview the feature. Click .
How do I enable merge in Solidworks?
The Combine feature lives under Insert>Features>Combine. The common function allows you to add two bodies together, and keep the area that is common to them. To use this feature, we will select the common button, and then under Bodies to Combine, select the two bodies.
How do I merge surfaces in Solidworks?
In the PropertyManager, under Selections: Select faces and surfaces for Surfaces and Faces to Knit . Select Try to form solid to create a solid model from enclosed surfaces. Select Merge entities to merge faces with the same underlying geometry.
How do you add multiple parts to a SolidWorks drawing?
Under Part/Assembly to Insert, do one of the following: Ctrl + select several components from the list. Click Browse. In the dialog box, Ctrl + select several components and then click Open.
How do you combine drawings?
Open a drawing. Click the Layout tab and then click the arrow next to the Insert group. Click Import Drawing/Data. The Open dialog box opens. Select the source file to merge into the current drawing. Select additional source files to be merged, one at a time, to add additional sheets to the current drawing.
How do I combine DXF files in SolidWorks?
Step 1: Pre-select a Plane or Face to import your DXF or DWG onto. Step 2: Under “Import” on your toolbar, select DXF / DWG and choose the file you want to import. Step 3: Ensure “2D sketch” is selected, and click “next.” Step 4: Toggle off layers that are not required and to save yourself time down the road.
How do I insert a part into another part in Solidworks?
To insert a part: With a part document open, click Insert Part (Features toolbar) or Insert > Part. Browse to a part document and click Open. Under Transfer, select any combination of items from the inserted part to be included in the derived part.
How do you merge edges in Solidworks?
You can merge multiple edges into a single edge.Heal Edges Click Heal Edges (Features toolbar) or Insert > Face > Heal Edges. In the PropertyManager, under Faces: Select the faces whose edges you want to heal for Face(s) to Heal . Click Heal Edges. Click .
How do you combine solids?
To merge solids and surfaces Click the first solid or surface. Ctrl+click additional solids or surfaces to merge them. The Structure tree shows the merge.
How do I use assembly in Solidworks?
Creating an Assembly from a Part Click Make Assembly from Part/Assembly (Standard toolbar) or File > Make Assembly from Part. An assembly opens with the Insert Component PropertyManager active. Click in the graphics area to add the part to the assembly. SOLIDWORKS makes the first component fixed.
What is loft in Solidworks?
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. For a solid loft, the first and last profiles must be model faces or faces created by split lines, planar profiles, or surfaces.
What are mating parts?
The definition of “mating” is simply two areas of one or more parts that contact each other. The areas may be flanges, edges, aligning holes (and their surrounding surfaces) or similar features.
Can you combine two assemblies in Solidworks?
In an assembly, you can join two or more parts to create a new part. The join operation removes surfaces that intrude into each other’s space, and merges the part bodies into a single solid volume.
How do I join Parts in Solidworks assembly?
To join parts: Create the parts that you want to join, then create an assembly containing the parts. Position the parts as desired in the assembly. Save the assembly but do not close the window. Insert a new part into the assembly: Close the sketch.
How do I convert assembly to part in Solidworks?
Depending on how the assembly was made most of the time this process will work: Open the assembly Save As Part and select the All Components radio button and hit Save. Go to Insert, Features, Combine: Drag a box around the entire part to select everything and have ADD marked then select.
How do you indent in Solidworks?
To create indent features: Click Indent (Features toolbar) or Insert > Features > Indent. In the PropertyManager, under Selections: Select a solid or surface body to indent in the graphics area for Target Body . Under Parameters: Set the Thickness (solids only) to determine the thickness of the indent feature. Click .
What is a multibody part in Solidworks?
A multibody part consists of multiple solid bodies that are not dynamic. If you need to represent dynamic motion among bodies, use an assembly. Tools such as Move Component, Dynamic Clearance, and Collision Detection are available only with assembly documents.
How do you split a body in Solidworks?
Split and Save Bodies Click Split (Features toolbar) or Insert > Features > Split. In the PropertyManager, set the options. Under Resulting Bodies, select the bodies to save under , or click Auto-assign Names. Double-click the body name under File, type a name for the new part in the dialog box, then click Save.
How do you use boundary surfaces?
The boundary surface feature lets you create surfaces that can be tangent or curvature continuous in both directions (all sides of the surface).Example of Boundary Surface Alignment. 1 Boundary surface feature The mesh shows the iso parameters for the boundary surface feature. 4 Selected curve.
How do you merge a tangent face in Solidworks?
Select Merge tangent faces to cause the corresponding surfaces in the resulting loft to be tangent if the corresponding lofting segments are tangent. Faces that can be represented as a plane, cylinder, or cone are maintained. Other adjacent faces are merged, and the sections are approximated.
