Table of Contents
Creating Planes Click Plane (Reference Geometry toolbar) or Insert > Reference Geometry > Plane . In the PropertyManager, select an entity for First Reference . Select a Second Reference and Third Reference as necessary to define the plane. Click .
Can you create a plane in Solidworks?
You can create planes in part or assembly documents. You can use planes to sketch, to create a section view of a model, for a neutral plane in a draft feature, and so on. Click Plane (Reference Geometry toolbar) or Insert > Reference Geometry > Plane .
How do you make a normal plane in Solidworks?
Click Plane (Reference Geometry toolbar) or Insert > Reference Geometry > Plane. For First Reference , select a vertex in the graphics area. In the PropertyManager, under First Reference, click Parallel to screen . Optionally enter a value for Distance to offset the plane from the reference vertex.
How do you make a sketch plane in Solidworks?
To add a 3D sketch plane: Click 3D Sketch (Sketch toolbar) or Insert > 3D Sketch. Do one of the following: Click Plane (Sketch toolbar) or Tools > Sketch Entities > Plane to display the Sketch Plane PropertyManager.
How do you create a parallel plane in Solidworks?
Right-click a face in the graphics area and click Create a Plane Parallel to Screen. The software adds an On Plane or On Surface 3D sketch point where you right-clicked and positions a reference plane parallel to the screen at that point.
How do you flip a plane in sketch in Solidworks?
Use the left-mouse to move, the right-mouse to rotate with the cursor in the graphics area. Place the cursor over each of the end points or the center of the black origin to flip the sketch.
How do I create a regular button in Solidworks?
Adding CommandManager Tool Buttons Right-click the CommandManager tab and click Customize CommandManager. In the Customize dialog box, on the Commands tab, select a category that contains tool buttons to add. Drag the buttons to the CommandManager tab. Click OK.
What is base sketch plane in Solidworks?
The sketch is the basis for a 3D model. You can create a sketch on any of the default planes (Front Plane, Top Plane, and Right Plane), or a created plane. You can start by selecting: Sketch entity tools (line, circle, and so on).
How do you select planes in Solidworks?
To change the plane, right click on the sketch in the Feature Manager and select the Edit Sketch Plane Icon. When you do, the Edit Sketch Plane command opens. To change the plane, right click in the window and clear the selections.
How do I create a plane at an angle to another plane?
The trick is simple: select a plane as the first reference and then select the multiple plane option BEFORE you pick the axis. Then select the angle option and type in 10 degrees and 36 in the ‘Number of planes to create’. This creates all 36 instantly!May 9, 2014.
How do I create a sweep feature in Solidworks?
To create a sweep: Sketch a closed, non-intersecting profile on a plane or a face.Click one of the following: Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep. Swept Cut on the Features toolbar or Insert > Cut > Sweep. Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep.
How do you flip an object in Solidworks?
In a part, click Mirror (Features toolbar) or Insert > Pattern/Mirror > Mirror. See Mirroring Features. Create an opposite-hand version of a part. In a part, select a face or plane to mirror about, and then click Insert > Mirror Part.
How do you reflect a sketch in Solidworks?
To mirror sketch entities as you sketch them: Select a line or a model edge in an open sketch. Click Dynamic Mirror Entities. (Sketch toolbar) or Tools > Sketch Tools > Dynamic Mirror . Create the sketch entities that you want to mirror. To turn mirroring off, click Dynamic Mirror Entities.
Where is the Tools button in Solidworks?
To add tool buttons to toolbars: With a document open, click Tools > Customize, or right-click in the window border and select Customize. For shortcut bars, use the keyboard shortcut to display the toolbar, right click, and click Customize.
Where is the normal to Button in Solidworks?
Orienting a Model to XYZ Coordinates From an open model or 3D sketch, with nothing selected, press the spacebar. From the Orientation dialog box, click Normal To .
Where is the Tools menu in Solidworks?
To display SOLIDWORKS toolbars: Right-click in the window border, click Toolbars, and select or clear a toolbar name. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.
How do you make a reference plane?
Use the Line tool or the Pick Line tool to draw a reference plane. On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane) To draw a line: On the Draw panel, click (Line). To pick an existing line: On the Draw panel, click (Pick Lines).
What is top plane in Solidworks?
SolidWorks provides Front, Top, and Right planes as defaults. The orientations (Front, Top, Right, and so on) relate to these planes. Planes are used for sketching and for creating geometry for features. You can create reference planes in addition to the default planes, and you can open sketches on planar model faces.
How do I edit a sketch plane in Solidworks?
Select the sketch in the FeatureManager design tree, and click Edit, Sketch Plane. Right-click the sketch in the FeatureManager design tree, and select Edit Sketch Plane . Select a new plane in the FeatureManager design tree or select a new planar face in the model for Sketch Plane/Face . Click OK .
How do you create an offset plane in Solidworks?
Click . You can also Ctrl + drag an existing plane to create a new plane that is offset from the existing plane. To change the names for construction planes in the current document, click-pause-click the plane’s name in the FeatureManager design tree and type a new name.
What is a sweep in Solidworks?
SWEEP is the one feature in Solidworks that helps sweep a closed profile along a closed or open path. In this session, we are going to use a simple 3D object as an exercise to demonstrate the use of the SWEEP command in Solidworks.
Is Janelle correct quizlet?
Is Janelle correct? No, because the lines are in the same plane.
Can two planes intersect?
The intersection of two planes is a line. They cannot intersect at only one point because planes are infinite.
How do you name a plane?
A plane can be named by a capital letter, often written in script, or by the letters naming three non-collinear points in the plane. For example, the plane in the diagram below could be named either plane ABC or plane P .
