Table of Contents
If you’re still having problems connecting your speaker, first try resetting it. If that doesn’t work, you may need to reset your WPS connection on your wireless router. Press the WPS Button on your wireless router. Then, within two minutes, press the WiFi button on the back of the JAM WiFi Speaker.
How do I put my jam plus in pairing mode?
Try powering the device on and off a few times. When speaker is on press and hold the play button. This will initiate the Bluetooth pairing mode and the Bluetooth light will begin flashing quickly.
How do I reset my jam plus speaker?
How do I factory reset my JAM WiFi speaker? Make sure the speaker is currently plugged into power and has been running for more than 45 seconds. Using a paperclip or some other small object, press and hold the reset button inside of the speaker for 15 seconds.
How do I pair my jam wireless speaker?
Pair your device with the unit by selecting HMDX Jam from your Bluetooth listings on your device or selecting YES. If prompted, enter “0000” as the passcode. 5. Press play on your device and use controls on the unit to adjust desired volume.
Why won’t my Bluetooth speaker connect?
If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.
How do I connect my jam speaker to my phone?
What to Know Put your Bluetooth device in pairing mode by pressing and holding the Power button or Pairing button. iPhone: Go to Settings > Bluetooth > Other devices. Tap the device to connect. Android: Go to Settings > Connected devices > Bluetooth. Select Pair new device and then tap the speaker’s name.
How do I know if my jam speaker is charging?
A: Yes, the speaker has a battery level indicator. An LED light flashes red when battery is low, and solid green when battery is fully charged.
Why is my Bluetooth flashing blue?
A constant blinking blue light can indicate a healthy connection. A slow pulsing blue light can mean the headphones are in pairing mode. The most common light pattern for pairing mode is blinking red and blue.
How do you reset a jam Bluetooth speaker?
Reset. To reset your speaker press and hold play/pause for 5 seconds or so until you hear a sound or the red light flashing. Note: Restoring the speaker’s factory defaults erases all paired Bluetooth devices from the speaker’s memory.
How do I connect my iPhone to my jam Bluetooth speaker?
Helpful answers The jam will only pair to one device as most of you know so, you must clear original device pairing. Next, turn on the Jam speaker and hold down for 5 seconds, i.e., power button on bottomof unit. Turn on bluetooth search on your device, i.e., iPhone, iPad, etc.
How does jam WiFi work?
To jam a network, you need to broadcast radio signals on the same frequency, overpowering the original signal. You can use your own WiFi router instead, or another wireless device that broadcasts on a more narrow range of frequencies.
How do you fix unsuccessful pairing?
What you can do about Bluetooth pairing failures Make sure Bluetooth is turned on. Determine which pairing process your device employs. Turn on discoverable mode. Make sure the two devices are in close enough proximity to one another. Power the devices off and back on. Remove old Bluetooth connections.
How do I fix the Bluetooth pairing problem?
15 ways to fix Bluetooth pairing problems Make sure both devices are on. Make sure both devices have and support Bluetooth. Make sure your devices are compatible with each other. Check the manufacturer websites. Make sure both devices have Bluetooth turned on. Reboot both devices just to be sure.
How do I force a Bluetooth device to pair?
Go to settings, Bluetooth, and find your speaker (There should be a list of Bluetooth devices that you last connected to). Tap on the Bluetooth speaker to connect, then turn the speaker on AFTER you pressed the connect button, while your device is trying to connect to it.
What is the passcode for pairing Bluetooth?
Use the code 0000 when pairing with another Bluetooth® device. The passcode may appear as Pass key, PIN code, PIN number, or Password depending on the Bluetooth device used.
How do I connect my speaker to my phone?
Step 1: Put the speaker in pairing mode. Switch on the speaker and long press the Bluetooth button on the device. Step 2: Switch on Bluetooth on mobile phone. Go to settings in your phone (both Android and iOS) and select the Bluetooth settings option. Step 3: Wait for the phone to connect.
Can you overcharge a Bluetooth speaker?
You can leave the Bluetooth speaker connected all day, but that will damage the battery. Charging the speaker all the time, even when the battery is full to capacity, might lead to overheating, which can make the battery explode.
How do you fix a speaker that is not charging?
How to Fix a Bluetooth Speaker that Won’t Charge Install Software Updates. Replace the Battery. Buy a New Micro USB Cable. Repair a Cracked Solder Joint. Replace the Charging Port. Replace the Charging Circuit. Alternative Ways to Charge. Wireless Charging.
Is the jam hang up waterproof?
The waterproof Hang Up Bluetooth® speaker has a stick pad to stick on any wall, shower tile, or wherever else you’re looking to sing along. With impressive 30 Metre/100ft range you can stay connected better, and for longer thanks to the 8 hours playtime between charges, also made simple by the built in charging cable.
Why is my jam speaker flashing red?
Have you got anything connected to the speaker, like a charger or a stereo audio cable or both? If not a flashing red light means that the battery is low and needs to be charged. Connect a charger and see if the red light stays on permanently. It can take up to 3 hours to charge fully.
Why does my jam speaker keep beeping?
The double beeping turned out to be the warning that the battery was low and needed charging.
