Table of Contents
What do you need to Hydro dip shoes with film?
To hydro dip shoes, you need fabric or plastic shoes (preferably white), gloves, spray paint, a deep container, tape, and water. Fill the container with water, and add the spray paint to create patterns. Dip the shoes, and the color will adhere to them.
What film do you use for hydro dipping?
The film used in hydro dipping produces a quality and custom finish for any OEM parts. Special inks are printed onto a large roll of Polyvinyl Alcohol (PVA) film. This clear film is water-soluble, which means it will start to break down when floated on water and the activator chemical is applied.
What is the activator for hydro dipping?
INK DRINK FILM ACTIVATOR. INK DRINK Hydrographic Film Activator is an easy to use film activator, compatible with most films on the market. Ink Drink maintains the richness and color vibrancy of your film and activates most films with a single pass (one coat).
Should I prime shoes before Hydro dipping?
Best Shoes to Hydro Dip at Home You can hydro dip any shoes at home. If you have a new pair of shoes you want to customize, or an old pair you want to give new life to, go it! It doesn’t matter what the material is — hydro dipping works on all kinds of fabric as long as you apply primer and paint correctly.
Can you Hydro dip without spray paint?
However, you’ll need to be more careful using the spray can because spraying too close can form air bubbles on the surface, leading to undesirable patterns. People would often ask, can you hydro dip without spray paint? Yes, you can.
What clear coat do you use for hydro dipping?
TWN’s clear coats are specifically designed for hydrographics. No matter your project or application, we have a clear coat with the unique characteristics that you need to create a long-lasting finish. CCI clear coats are the ultimate clear coat for sporting goods items.
Can you clear coat Hydro dip?
Clear coating is highly recommended for all hydrographically decorated parts. This helps to seal in the inks and allows for a cleaner finished product. When the dipped part is dry, apply the clear top coating (matte, semi-gloss or high gloss) to finish off your newly dipped hydrographic part.
Can you use gloss spray paint for hydro dipping?
A gloss paint is ideal for hydro dipping. Rust-Oleum offers a wide selection of colors under high gloss, gloss, and semi-gloss finishes. If you are still looking for matte or satin finish, you can achieve that with your clear coat at the end.
What kind of spray paint do you need for hydro dipping?
You can hydro dip any item with a nonporous surface — all you need are a few simple supplies! Step 1 – Using your 2x Rust-Oleum Spray Paint prime the item that you are going to Hydro Dip. Allow that to dry.
What materials do you need to hydro dip?
Step-By-Step Guide to Hydro Dipping Large, deep plastic container (the container will have paint on the inside after the hydro dipping is complete) DIY complete hydrographic printing kit. Object to be dipped. Sandpaper to smooth the surface. Rags. Bucket of mild cleaning solution and water. Vinyl, rubber, or latex gloves.
How much does hydrographic film cost?
Average Costs for Hydro Dipping Hydro dipping fees for guns typically range from $200 to $500, depending on the make and model. Gun accessories cost $50 to $200 to hydro dip. The average cost for hydro dipping a smaller object, such as cups starts at $30.
What is Hydro dipping paper?
Hydro dipping (also known as immersion printing, water transfer printing and hydro imaging ) is a unique process that allows you to apply graphics to almost any three-dimensional object.
How long does hydro dip last?
Hydrographic finishes are very robust and will last for many years under normal use. However, similar to your car finish, the paint can scratch if the product is abused. Scratching the protective clear coat can cause failure to the hydrographic finish.
What is aerosol activator?
Product description. Stick Fast CA Aerosol Activator is a specially formulated, misting activator. It’s designed to minimize the potential for over application of accelerator during the finishing process which can cause CA to foam or discolor.
Can you Hydro dip something twice?
Sometimes you’re not happy with your initial hydro dip so you want to give it another coat to cover up the old paint. Or maybe you want to dip more than once to merge multiple graphics and create cool effects. If you’re going to do this make sure your product is dry before dipping again.
Can u Hydro dip glass?
These hydro dip glass bottles are colorful and unique and the paint technique is easy. You will never get the same paint finish twice with hydro dipping. I have photos, a tutorial, and a video showing the process. Definitely watch the video because the technique is so much easier to follow.
Do you need a base coat for hydro dipping?
Choosing the right base coat color is very important in hydro dipping. So if you are wanting the design to look as intended and usually shown on the product page of where you are purchasing the film, then using a white base coat is usually the best choice unless it is specified that another color was used in the photo.
Can you Hydro dip paper?
Here’s how it works. This type of PVA paper is called “Water Transfer Paper” and it’s mostly used for Hydro Dipping. The paper has a shiny PVA side and a matted backing that is peeled away. The PVA film dissolves when it’s submerged in water. The ink then actually floats on the surface of the water.
