Table of Contents
What materials do you need to Hydro dip?
Step-By-Step Guide to Hydro Dipping Large, deep plastic container (the container will have paint on the inside after the hydro dipping is complete) DIY complete hydrographic printing kit. Object to be dipped. Sandpaper to smooth the surface. Rags. Bucket of mild cleaning solution and water. Vinyl, rubber, or latex gloves.
How do you Hydro dip step by step?
How to Hydro Dip STEP 1: CLEAN. Using 91% isopropyl alcohol, cleaning cloths and gloves, ensure that the work piece is clean. STEP 3: BASE COAT. Apply the base coat. STEP 2: PRIME. STEP 4: Film placement. STEP 5: FILM hydration. STEP 6: Tape. STEP 7: ACTIVATE & WAIT. STEP 8: DIP.
Can I Hydro dip myself?
It’s the original (and patented) DIY hydro dipping kit. The process formally known as water transfer printing was once only available commercially. MyDipKit was designed for the everyday, do it yourself Hydro Dipping enthusiast. The kit contains the basic supplies needed for processing parts at home.
What kind of paint do you use for hydro dipping?
You can hydro dip any item with a nonporous surface — all you need are a few simple supplies! Step 1 – Using your 2x Rust-Oleum Spray Paint prime the item that you are going to Hydro Dip. Allow that to dry.
Do you need a base coat for hydro dipping?
Choosing the right base coat color is very important in hydro dipping. So if you are wanting the design to look as intended and usually shown on the product page of where you are purchasing the film, then using a white base coat is usually the best choice unless it is specified that another color was used in the photo.
Can you hydro dip without spray paint?
However, you’ll need to be more careful using the spray can because spraying too close can form air bubbles on the surface, leading to undesirable patterns. People would often ask, can you hydro dip without spray paint? Yes, you can.
Do you Hydro dip with hot or cold water?
The ideal water temperature range for hydrographic dipping is 80 to 90 degrees Fahrenheit.
Do you need to sand before Hydro dipping?
You still need to sand/scuff up (if needed or required) the item, prime it, apply a base coat and a clear coat to protect it. The only difference is that now you are adding one step after you apply your base coat and before applying your clear coat, and that’s the dipping process.
What is the activator for hydro dipping?
INK DRINK FILM ACTIVATOR. INK DRINK Hydrographic Film Activator is an easy to use film activator, compatible with most films on the market. Ink Drink maintains the richness and color vibrancy of your film and activates most films with a single pass (one coat).
How much is hydro dipping cost?
Average Costs for Hydro Dipping The average cost for hydro dipping a wheel for a vehicle is roughly $150, and that pricing can vary by as much as 20% – 50%, depending on the type of activator, finish, and labor costs. Hydro dipping fees for guns typically range from $200 to $500, depending on the make and model.
Can u hydro dip glass?
These hydro dip glass bottles are colorful and unique and the paint technique is easy. You will never get the same paint finish twice with hydro dipping. I have photos, a tutorial, and a video showing the process. Definitely watch the video because the technique is so much easier to follow.
How long does hydro dip last?
Hydrographic finishes are very robust and will last for many years under normal use. However, similar to your car finish, the paint can scratch if the product is abused. Scratching the protective clear coat can cause failure to the hydrographic finish.
Does Krylon spray paint work for hydro dipping?
Krylon COLORmaxx Spray Paint It’s good for hydro dipping because it’s simply about two things: colors and surfaces. Krylon’s ColorMaxx is available in 89 colors and adheres to any surface — wood, metal, fabric, glass, ceramic — you name it. This is a great starter paint for those new to hydro dipping.
What clear coat do you use for hydro dipping?
TWN’s clear coats are specifically designed for hydrographics. No matter your project or application, we have a clear coat with the unique characteristics that you need to create a long-lasting finish. CCI clear coats are the ultimate clear coat for sporting goods items.
Do you let the primer dry before hydro dipping?
Next in the hydro dipping process you want to apply the primer. Onto the next step in your hydro dipping project. Wait for 15 minutes at 20 degrees c for the part to be fully dry before moving on to the next step.
How long should paint dry before hydro dipping?
Most manufacturers of hydrographic dipping film recommend that you wait for a minimum of 20 minutes to eight hours after the painting step to do the dipping step. That’s because the paint needs to be a little soft in order for the hydrographic film to adhere to the item but hard enough to be handled.
How do you dry after hydro dipping?
Use a clear, spray sealant. To keep your hydro dip paint looking fresh and clean, spray it with a clear spray sealant (available in hardware stores in matte, semi-gloss, or gloss finish). Spray an even coat over the object and let it dry for several hours.
Is Krylon spray paint acrylic based?
Krylon Crystal Clear Acrylic spray paint provides a permanent, protective gloss coating that will not yellow with age.
How do you prevent air bubbles when Hydro dipping?
Putting your item flat into the paint allows air bubbles to form. To avoid this you want to lower your item on an angle so no air bubbles are able to be created and the paint sticks cleanly.
