Table of Contents
You need to add a feature to the imported body. Select the bottom face of the imported body. Click Chamfer . Under Chamfer Parameters, make the desired settings and click OK . Right-click Imported1 in the FeatureManager design tree and select Edit Feature. Click OK. Select the STEP file and click Open.
Can I edit a step file?
If you want to make changes to the . STEP file, you still can, even if you’ve used 3D Interconnect, but there are some extra steps involved. STEP file without using 3D Interconnect. So if you’ve found that you can’t edit .
How do I edit a feature in Solidworks?
To edit the definition of a feature: Do one of the following: Select a feature in the FeatureManager design tree or the graphics area. Click Edit > Definition. Edit the definition in the dialog box by specifying new values or options. Click OK to accept the changes.
How do I edit an imported step in Solidworks?
Editing Imported Features In the FeatureManager design tree, right-click the feature created from the imported document, and select Edit Feature. In the Files of type list, select the desired format. Browse to select the desired file to import. Select the Match faces and edges check box, if desired. Click Open.
Can you open a STEP file in Solidworks?
SOLIDWORKS 3D Interconnect can read STEP, IGES, and ACIS file formats. To open STEP, IGES, and ACIS files in SOLIDWORKS: Click Open (Standard toolbar) or File > Open.
How do I convert Assembly to step in Solidworks?
You can set the export options when you export SOLIDWORKS part or assembly documents as STEP files.To set the STEP export options: Click File > Save As. Select a STEP file type for Save as type, then click Options. Select from the options described below, then click OK. Click Save to export the document.
Can you edit a step file in Creo?
With PTC Creo, design engineers can edit 3D CAD data from STEP files using a direct modeling approach that won’t sacrifice the original design intent. Engineers collaborate effectively and interact easily with third-party or legacy CAD data files.
What programs can open STEP files?
Programs that open STEP files Autodesk Fusion 360. Dassault Systemes SolidWorks. IMSI TurboCAD Pro. ideaMK STP Viewer. Dassault Systemes CATIA. Autodesk Fusion 360. IMSI TurboCAD Deluxe. FreeCAD. Linux. Dassault Systemes CATIA. LKSoft IDA-STEP. FreeCAD. Web. eMachineShop Free Online STEP File Viewer. Wikifactory. ShareCAD.org.
Where is direct editing in SolidWorks?
To do this, right click on an existing tab, go to the “tabs” fly-out menu and make sure “Direct Editing” is checked. If you are using SolidWorks 2019 or an earlier version, simply right-click on a tab and make sure “Direct Editing” is checked.
How do I edit extrusion in SolidWorks?
If you enter the wrong distance to extrude to: and exit the boss-extrude dialog without correcting it, go to the design tree, right-click on the extrude name, and find the “edit feature” button in the box of options that appears above the mouse. The dialog will reopen and you can edit the properties of the extrude.
What is fully defined sketch?
Fully defines the sketch by applying combinations of relations and dimensions. Selected entities. Applies relations and dimensions only to specific sketch entities that you select for Entities to Fully Define. Calculate. Analyzes the sketch and generates the appropriate relations and dimensions.
How do I scale a step file in Solidworks?
Scaling a Part In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager. Click. The geometry of the model increases or decreases in size according to the scaling factors and other options you set. The Scale feature scales only the geometry of the model.
How do I convert a STEP file to part?
Click Open (Standard toolbar) or File > Open. In the dialog box, in Files of type, select the desired file format: STEP AP203/214/242 (*.Select one of these options: Default (As per the file). Import multiple bodies as parts. Import assembly as multiple body part.
How do I import a STEP file into solidworks 2020?
In a part document, click Imported Geometry on the Features toolbar, or click Insert > Features > Imported. The Open dialog box appears. Browse to the desired file, and click Open. For ACIS, IGES, STEP, STL, VDAFS, or VRML files, you can click Options to set the import options.
How do I convert a STEP file to STL?
The easiest way to convert STEP’s to STL’s is to just use that program. In most cases, you can directly export from the CAD program to an STL. From File > Export, “STL” is usually available as a file format. This is true of FreeCAD and AutoCAD.
How do I use FeatureWorks in Solidworks?
To set FeatureWorks to activate whenever you open SOLIDWORKS, click Tools > Add-Ins and select FeatureWorks under the Active Add-ins and Start-up columns.
What is the difference between step AP203 and AP214?
Generally, AP203 is a “general” STEP format. This file type does not manage Colors and Layers. AP214 has everything a AP203 file includes, but adds colors, layers, geometric dimensioning and tolerance, and design intent. AP214 is considered an extension of AP203.
How do STEP files work?
A STEP file reads and saves the entire body of a 3D model, rather than just basic geometries, with a high level of precision and allows you to edit the file later, even in other programs or software.
Which is better STEP or IGES?
Why is STEP better than IGES? STEP is newer technology, where IGES which is older 1990’s technology, that has not been updated in over 20 years. STEP files tend to be solid models, where IGES files are more often surface models, which could have gaps and missing faces.
How do I convert a STEP file to part in Creo?
Click File > Open without a part or assembly open or Model > Get Data > Import with a part or assembly open. Select click STEP (. Select the STEP file you want to import on the list of available files or browse to find and then click the STEP file. Click Import to create or append the STEP file.
How do I convert a SolidWorks file to Creo?
To export a SOLIDWORKS document as a Pro/ENGINEER or Creo Parametric file: Click File > Save As. Set Save as type to: ProE/Creo Part (*. prt) for parts. Click Save. SOLIDWORKS exports solids and surfaces only, not feature data.
