Table of Contents
Using a hand saw is the most common way of cutting a PVC pipe because the tool essentially does all of the work for you. Like the plastic pipe cutter, hand saws are relatively inexpensive to buy. You can use nearly any kind of saw, but a hacksaw is best, as it affords much more flexibility.
What is the best tool to use to cut PVC pipe?
Hacksaw. effectively cut pipe of any thickness, and they are the best method for straight cutting PVC pipe. They also work well if you are making a large amount of small, precise cuts. Hacksaws are best used in tandem with a vise, but any type of clamp that keeps the pipe locked in place while you cut will also work.
What is the easiest way to cut PVC pipe?
A hand saw is the most common way to cut PVC pipe, but can be a little messy. You can use almost any kind of saw, but a hacksaw is best as it gives you much more flexibility.
What kind of blade do you need to cut PVC pipe?
For cutting PVC pipe, use a combination wood/metal blade with a 10/14 TPI configuration. There is no specialty PVC sawzall blade, nor is one necessary.
How do you cut PVC pipe without a saw?
Wrap the cotton string halfway around your PVC pipe, and teeter-totter the ends back and forth in a sawing motion. The friction of the cotton string against the PVC pipe will cut right through it. You can also loop a piece of butcher’s twine, or kite string, all the way around the PVC pipe.
Can I use a Sawzall to cut PVC pipe?
Sawzall/Reciprocating Saw As long as you have a long enough blade and some skills, you can cut up to 8” PVC pipe with a reciprocating saw.
Can you cut PVC pipe with a knife?
Pro Tip: Keep your PVC cutter blade sharp and use it in temperatures above 50 degrees; below that, PVC becomes brittle and a dull blade can crack the pipe. Note: Squeeze-style cutters are only capable of cutting PVC pipe with smaller diameters.
Can you cut PVC with a hand saw?
Hand Saw Using a hand saw is the most common way of cutting a PVC pipe because the tool essentially does all of the work for you. Like the plastic pipe cutter, hand saws are relatively inexpensive to buy. You can use nearly any kind of saw, but a hacksaw is best, as it affords much more flexibility.
Can I cut PVC with miter saw?
A power miter saw is ideal when you need to cut large quantities of PVC pipe. Power miter saws are however, expensive. If you already own one, or have access to one and you know how to safely use it, you can use the existing wood blade to cut PVC pipe without buying a special blade.
How do you cut PVC without cracking it?
You can use a hacksaw, fine-toothed saw, circular saw, or jigsaw to cut plastic. What is this? If you use a hacksaw or circular saw, you’ll also need a plastic cutting blade. Avoid using saws or blades with large teeth because they will chip or break the plastic and create rough edges.
Can a hot knife cut PVC?
A hot knife: Using a hot knife to cut through plastic exposes you to the risk of a nasty burn, or the plastic catching fire. Power tools: Using high RPM (revs per minute) power tools will melt the plastic you are cutting through, running the risk of getting a burn.
Can you cut PVC with a metal saw?
Reciprocating saw blades come in various lengths and with a variety of tooth counts. The blades with the finest teeth, which are for metal, tend to get clogged when cutting plastic, whereas those with the fewest teeth are apt to chip and shatter PVC. The recommended blade is a wood-cutting blade with 10 teeth per inch.
What is the best hacksaw blade for cutting PVC pipe?
18-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut faster then the higher TPI blades and create a smooth edge on the material, the edge is not as smooth as what a higher TPI blade would primarily cut. 24-32 TPI is the range of metal cutting, PVC cutting and finish cut blades.
Can you cut PVC with scissors?
Using Scissor or Ratchet-Type Cutters With scissor-style cutters, apply pressure to the handles and slowly rotate the cutter around the pipe. Making sure the cut is straight, continue to rotate until you cut through the pipe.
Can you cut PVC pipe with a jigsaw?
Choosing the Cutter Much of the time, PVC can be cut on a worktable or other stable surface. In these cases, a bayonet blade that works back and forth, such as that found on a jigsaw or reciprocating saw, works well. When cutting pipe in place, a small tool that can be easily positioned is needed.
Can you cut PVC with dental floss?
I decided to give the old hack preferred by Plumbers, Chefs and Escaping Prison Inmates: use dental floss as a cutting tool. Whether you’re cutting through PVC pipe, cake or steel prison bars, the premise is the same: use a length of floss as a saw blade to get a clean and easy cut.
How do you cut PVC pipe for crafts?
The most versatile and easiest way to cut PVC pipe is either with a hacksaw or a pipe cutter. Other options are to use a mitre saw, string or even a regular saw, although you will get a less accurate cut using an all-purpose saw, because of the large teeth.
Will PVC pipe dull a saw blade?
Does cutting PVC dull saw blade? The answer to this question is yes. If you are not careful while cutting PVC pipes, then your saw blade will get dull within a few cuts.
Can I cut PVC with a band saw?
Bandsaw: The last method is to use a bandsaw to cut both cylindrical and sheet PVC. A bandsaw works by running a blade along a track at high speed to cut through a material. However, despite the drawbacks, its capability to make quick work of cutting PVC makes it worth a mention.
Can you use a soldering iron to cut plastic?
I don’t know if anyone else does this or not, but soldering guns/irons work really well for cutting plastic. Just let it get good and hot, and it cuts through the plastic like a hot knife through butter.
Can you use a wood saw on plastic?
Ideally, you will use a sharp blade specified for use with plastics. You can also use a blade marked for wood, but it’s possible that friction from the blade will create too much heat, causing the cut plastic to melt.
