Table of Contents
Cut more materials than ever before with the Cameo 4 series. You can now easily cut vinyl, cardstock, crepe paper, foam, fabric, chipboard, leather, and more!.
What materials can be cut with a silhouette cameo 4?
With the Rotary Blade, you can cut fabric materials like cotton fabric, felt, leather, and more. The Kraft Blade for Cameo 4 can cut materials like acetate, craft foam, and burlap. The Punch Tool punches holes in the spaces you need to weed vinyl or heat transfer, making weeding faster and easier.
How big can a silhouette cameo 4 cut?
Silhouette Cameo 4 desktop cutting system Silhouette Cameo ® Specifications: Maximum Cutting Area 12 in. x 24 in. (30.5 cm x 61 cm) with a cutting mat 12 in. x 60 ft. (30.5 cm x 3m) without a cutting mat* *For best results, up to 10 feet recommended; up to 60 feet technically possible.
Can the Silhouette Cameo 4 Cut Metal?
20 times the force of previous models – You can make deep cuts on material like metal, leather and even wood. This really solves the pain point of the previous Cameo 3model-the cutting power on that was rather lacking. A revamped dual carriage – The carriage on this is remarkably similar to the Cricut Maker.
Can the Silhouette Cameo 4 cut plastic?
Yes! All Silhouette cutting machines can cut shrink plastic, although to get the very best cut, I recommend following the process outlined in this post. (Psst – if you have a Cameo 4, check out the end of this post for another option.)Nov 3, 2020.
Can Silhouette Cameo cut 4 acrylic?
I get asked a lot if it’s possible to cut acrylic with Silhouette CAMEOthe short answer is no. Since the Silhouette cutting machines can’t cut actual acrylic the secret is Shrinky Dinks.
What is the thickest material a silhouette cameo can cut?
The Silhouette Deep Cut blade can cut materials up to 2mm thick. Those are usually reserved for the Curio, CAMEO 3, Portrait 2 and Silhouette CAMEO 4 which are the machines that have the higher clearance and therefore can cut thicker materials.
How long can I cut on Cameo 4?
The Silhouette Cameo 4 comes with a 12 by 12 inch cutting mat but can cut projects up to 10 feet long. The Cricut Maker’s maximum cutting length is only 24 inches making the Silhouette the machine you want when making larger projects such as banners.
Can the Silhouette Cameo 4 emboss?
No, the Silhouette Cameo 4 does not currently have a tool for embossing paper, card stock or any other material. Silhouette’s embossing solution is the Curio machine. The Curio is designed to compliment the company’s flagship craft cutters with features like embossing, stippling and etching.
Can the Silhouette Cameo 4 cut chipboard?
Yes it can, with the manually-adjusted 3mm Kraft blade. It’s a new tool exclusively for the Cameo 4 that is made for cutting thicker, denser material like balsa wood, chip board or even felt or faux leather. This motor is capable of generating a cutting force of up to 5,000 grams.
What can you do with Cameo 4?
The amount of things you can make with the Silhouette Cameo is endless. Here are a few ideas: Etched glass projects. Greeting cards. Iron-on designs for Tshirts, towels and more. Gift boxes. Party decorations. Temporary tattoos. Stickers. Magnets.
Can the cameo cut chipboard?
The Silhouette CAMEO® 3 has an increased clearance level (2 mm) compared to previous versions of the CAMEO. This allows you to cut thicker materials, such as craft foam, chipboard, leather and more, using the Deep-cut Blade.
Can Silhouette Cameo cut acetate?
Once the etching is finished you can remove the sheet and you’ll be able to see it. By the way, acetate sheets can be cut with the Silhouette 2mm Kraft Blade on a blade of 20, force 33, and 4 passes – if you are also looking to cut the sheet.
Can Silhouette Cameo cut wood veneer?
No, I wouldn’t buy either of them to cut wood. I’ve used my old cameo to cut ultra thin wood veneer, but it’s very hard on the blade, obviously, which adds up very quickly.
What materials can a silhouette cut?
Silhouette cutting machines are designed to cut a variety of materials including vinyl, paper, specialty patterned papers, cardstock, vellum, iron-on heat transfer material, fabric (when using our Interfacing products) and sticker paper among other materials.
Can a silhouette cameo engrave?
Your Cameo 4 can now engrave or etch on pretty much anything you would normally cut as long as it is less than 3mm! The tip is made of very hard carbide and has a sharp tip. The engraving tip does not require any other special pieces to work. No special mats are required either, just use your original Silhouette mat.
Can the cameo cut wood?
It can cut through hundreds of different materials, so don’t take this as a comprehensive list. Some of the more common materials the Silhouette Cameo 3 can cut are: craft foam, leather, balsa wood, chipboard (with the Deep-Cut blade).
Does cameo 4 print color?
With print and cut stickers you can easily change the color of your designs (or add a pattern fill) to customize them. That’s how it’s going to cut a solid sticker and how you’ll be able to successfully print and cut text with Silhouette CAMEO.
How big can you print then cut on Silhouette?
Maximum Size for Print & Cut Jobs The maximum cutting size is defined by your Silhouette cutting machine model. If you have a Portrait model, then the maximum Print & Cut media size would be 8.5 x 11 inches. If you have a Cameo (12″) model, then the maximum Print & Cut material size would be 12 x 12 inches.
Can I print and cut on vinyl?
Make colorful removable DIY vinyl decals with Cricut® Printable Vinyl. The Print then Cut feature gives you endless possibilities. Use your home printer and Cricut Explore® machine to print and cut out images, patterns, and even photos cleanly and precisely.
Can you Deboss with silhouette?
If have the Silhouette Curio™, you have the ability to emboss and deboss materials like paper and embossable foil. This process involves pushing designs into the material so that the designs are raised and give the material some texture.
