Quick Answer: How To Install Bltouch On Ender 3

Table of Contents

How to install BL-Touch on the Ender 3 V2 3D Printer (No Adapter Board Version) Step 1: Access your printer’s motherboard. Step 2: Remove z-axis limit switch. Step 3: Connect and thread BL-Touch cable. Step 4: Mount the BL-Touch on the Nozzle Assembly. Step 5: Update Motherboard Firmware. Step 6: Determine and Set Z-offset.

Does BLTouch work with Ender 3?

The BLTouch wiring connects to the Ender 3 mainboard by splicing into the Z Endstop connector. This connector is labeled with a small yellow label that reads “Z”. There are two options for connecting the BLTouch to your Ender 3’s existing wiring: if you have a soldering iron, you can splice a wire in.

How do I install ender 3 V2 BLTouch firmware?

Step-by-Step Wipe your micro SD card of all files. Download firmware for the Ender 3 V2 and BLTouch from Creality’s website (BIN file). Copy the firmware onto the micro SD card. Turn off your 3D printer and unplug the power cord. Unplug and remove the Z-axis endstop from your printer.

Is BLTouch worth it ender 3 V2?

First of all, BLtouch is not necessary as long as you use a flatbed. A bed leveling sensor can eliminate warped beds’ negative effects and save your time. So if you have any problems with the leveling, BLtouch is absolutely worth it, especially if your bed is not conducive.

Where do you mount a BLTouch?

The mount needs to be adjustable so that the distance between the bottom of the sensor (not the pin) needs to be 8.3mm above the tip of the nozzle. The sensor should also be at least 15mm away from the hot bits. The BLTouch needs changes made to the configuration.

How do I know if my BLTouch is working?

How can I tell if BLTouch is triggering? During startup: BLTouch extends and retracts several times. In the LCD menu for BLTouch; select CMD:Self Test : BLTouch turns red, extends and retracts several times. In the LCD menu for BLTouch; select CMD:Extend : BLTouch extends.

How do I install Bltouch ender 3 firmware?

What does a Bltouch do?

BL-Touch is a smart auto leveling sensor for 3D printers based on open source, which can precisely measure and adjust the distance between the build plate and printer nozzle in a simple and easy way. Automatic leveling achieves via the collaboration between the BL-touch device and its firmware.

What is BLTouch ender?

BLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.

Does Ender 3 have auto bed leveling?

Coming with everything you need, the BLTouch is by far the most popular auto-bed leveling solution for the line of Ender 3s. The BLTouch utilizes a physical push-pin that detects the build platform. In conjunction with an in-built Hall sensor, the device then signals to the printhead that it’s reached the lowest point.

How do I make ender 3 better?

Best Creality Ender 3 (Pro/V2) Upgrades & Mods in 2021 Official Upgrades and Mods. Cmagnet Build Surface Plate. Tempered Glass Build Plate. 3D Printer Enclosure. Creality Laser Engraving Attachment. Metal Bed Leveling Nut. Upgrades and Mods to Buy. Ender 3 Dual Z-Axis Upgrade.

How do I reset my Ender 3 Max?

Either run M502 then M500 from a utility like Pronterface or OctoPrint, or go into the printer’s display and do “Reset EEPROM” followed by “Store Settings”. This just reverts any changed settings back to the firmware’s defaults, things like Z-offset, E-steps, default preheat temperatures, etc.

How do you fix a BLTouch?

BLTouch Troubleshooting Avoid Clones. This guide assumes you are using a genuine BLTouch from Antclabs. Double Check Your Wiring. * Cut the Trace. Note that BLTouch V3+ no longer has a trace and is not needed to work with the Duet. Use the Resistor. Test the Probe First. Upgrade the Firmware. Use Probe Type 9.

How accurate is BLTouch?

The BLTouch is a sensor for automatic print bed leveling. A Hall sensor is triggered by an electromagnetic field as soon as the sensor pin moves back into the housing by touching the print bed. It is extremely accurate with a repeatability of about 0.001 mm.

How do you calibrate the Ender 3 v2 BLTouch?

Calibrate the Z offset for the BLTouch probe Place a sheet of paper under the nozzle, then move the Z position (Prepare » Move Axis » Move Z) to 0 (the auto home will end with Z around 10mm). Select Back, then select Z Offset. Decrease the value by 0.1, then press the wheel to move the nozzle to the new position.

Why is BLTouch always red?

The Bl touch will blink its red LED when it did not successfully complete the self test. The BL touch will run its self test when the printer is first powered up. The self test will push the plunger up and down 2 or 3 times.

How much can BLTouch compensate?

BLTouch is an auto leveling sensor that can precisely measure the tilt of the print surface so that your printer can compensate as small as 0.01mm* difference.

What are Bltouch Springs for?

BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.

How can you tell a fake BLTouch?

Genuine BLTouch has a QR code on PCB. Genuine BLTouch has a QR code on PCB. If there is no QR code on PCB, suspect it (All BLTouch produced after May 2017 includes QR code). The fake BLTouch produced by Chinese immoral manufacturers (such as 3D Touch and TL Touch etc.).

What type of probe is BLTouch?

The BLTouch is a touch-based 3D printer bed leveling probe which enables automatic bed leveling on your 3D printer, regardless of print surface.