Table of Contents
Simply right-click on a radius dimension that was applied (by default) to the arc. Then, click on the option that says “toggle Diameter”. You’ll then see the arc has the diameter applied. Fusion 360 will automatically double the radius value, leaving you with the same dimension.
How do I change dimensions in Fusion 360?
Edit your sketch, then click the Sketch drop down menu and click Sketch Dimension, then click on the dimension line you want to edit, move the mouse to show the dimension and click again to fix it to the sketch. You can now change the dimension to what you want.
What are driven dimensions?
Driven dimensions are used by Creo Parametric to measure the size and shape of features within a model. The value of a driven dimension changes when the size and shape of the features are modified. Driven dimensions can have tolerances, to which manufactured components can be accepted or rejected.
What do dimension lines end with?
The dimension line is a fine, dark, solid line with arrowheads on each end. It indicates direction and extent of a dimension. In machine sketches and drawings, in which fractions and decimals are used for dimensions, the dimension line is usually broken near the middle to provide open space for the dimension numerals.
How do you change the units in Fusion 360?
Click the profile in the upper right corner of Fusion 360. Select Preferences from the drop down menu.Click Design under Default Units. Change the Default units for new design to the desired unit. ( metric or imperial) Click Apply. Click Ok.
How do I change driven dimensions?
To change a driving dimension to a driven dimension, select a driving dimension and then click the Driving button on the Dimension command bar. If the Driving button is not available, select the Maintain Relationships command.
What is a driven dimension Onshape?
You are able to specify dimensions as driven (reference) or driving. You can specify dimensions as driven (reference) or driving. You have the ability to use the Measure tool to measure anything in the graphics area. Some tools allow you to dimension as you sketch.
What is solidworks driven dimension?
If you dimension a closed-profile sketch that would cause an over defined sketch, the dimension is automatically changed to driven. When you sketch the last entity to create a closed-profile sketch, it may clash with inferred relations from the other sketch entities.
How do I create a driven dimension in Solidworks?
Inserting Driven Dimensions Click a sketch tool. In the graphics area, right-click and click Sketch Numeric Input . In the graphics area, right-click and click Sketch Dimension Driven . In the graphics area, right-click and click Add Dimension . Sketch an entity.
How do you show dimensions?
For example, a dimension of a rectangular room on a blueprint, 14′ 11″ X 13′ 10″ equates to a room size of 14 feet, 11-inches wide by 13 feet, 10-inches long. Dimensions are expressed as width by length by height or depth in three-dimensional space.
How do you make dimensions not driven?
Look for other dimensions or relations that you can delete or change. Select Don’t ask again to suppress this dialog box. The option you last used will apply by default. Use the right-click menu Driven option to toggle between dimension driven and dimension driving.
What does make dimension driven mean?
Make This Dimension Driven. The over defined or unsolvable state is repaired. Leave This Dimension Driving. The sketch remains over defined or unsolvable. Look for other dimensions or relations that you can delete or change.
How do you delete a driven dimension?
In the property menu on the left side of the screen, select the “Other” tab. Uncheck the box next to “driven”. This may cause your sketch to be overconstrained. In that case, delete or make driven the other conflicting dimensions or constraints.
How do you use equal constraints in Fusion 360?
Add an equal constraint to a sketch Click Sketch > Constraints > Equal . The Equal constraint icon displays next to the cursor in the canvas. In the canvas, select the sketch geometry you want to constrain.
What is the heaviest line in a drawing?
The heaviest line weight indicates the ground line cut.
How do you draw a dimension line?
To draw a vertical or horizontal dimension line, click the Horizontal or vertical dimension tool . Click to place the starting point, and drag to where you want to place the endpoint of the dimension line. Move the pointer to position the dimension line, and click to place the dimension text.
What dimensions should write on dimension line?
Dimensions should be written on a drawing, according to one of the following two methods. Only one method should be used on any one drawing. Dimensions should be placed parallel to the dimension lines and preferably near the middle, above and clear off the dimension line (Fig.
How do you convert metric units?
To change a metric measure of length, mass, or capacity from one unit to another, you can use the relationship between the two units and multiplication by a power of 10. 1 Convert 4.5 liters to milliliters. You need to convert liters to milliliters. Use the relationship 1 L = 1,000 mL.
How do you change the dimension precision in Fusion 360?
To change the dimension precision in a design follow these steps: Click on the profile icon in the upper right corner of Fusion 360. Click Preferences. Navigate to the Unit and Value Display tab on the left of the Preferences dialogue window. Change the General and/or Angular precision as needed. Click Apply.
How do I edit driven dimensions in Inventor?
Edit Dimensions Double-click the dimension you want to edit. Click the Dimension command in the Constrain panel and then click the dimension you want to edit.
How do I change the value of a driven dimension in Solidworks?
To change a dimension: Double-click a dimension. The Modify dialog box appears. Change the dimension value with the arrows, thumbwheel , mouse wheel, or by typing in the dimension box.
How do you use the Dimension tool in Onshape?
Activate the tool (click the icon or use the d shortcut), then: Click a highlighted drawing entity (circle, arc, circle center, line, or point). Click a second highlighted drawing entity.Measure the radial dimension of a circle or arc. Click . Select the arc or circle. Move the cursor and click to place the dimension.
