Table of Contents
How do you put a Wahl cordless clipper back together?
How To Align a Wahl 2 Hole Clipper Blade Slightly loosen both blade screws, just enough to be able to shift the blade. Align bottom blade with the top blade. Extreme left hand tooth of the top blade must be on the first small tooth of the bottom blade. After blade is aligned, tighten screws. Plug clipper in.
How do you remove Wahl clipper blades?
Removing the Blade: 1 Press your thumbs against the teeth of the blade and push away from the clipper (Fig B) 1 Once the blade has been removed use a soft brush to clean away and hair or dirt. 2 Oiling should be carried out at first use and after every cut – ensure excess oil is wiped away.
How do you clean Wahl Clippers at home?
No parts specified. Step 1 How to Clean and Sharpen your Wahl Hair Clippers. Take a fine hair brush and sweep it across the clipper base. Fully immerse and soak your blade in 90% isopropyl alcohol to remove any rust that might be present. Take a clean lint free towel and dry the blade.
How do you take apart a Wahl beard trimmer?
To repair your Wahl Cordless Beard Trimmer, use our service manual. Step 1 Remove battery cover. Begin by removing the battery cover from the back of the trimmer. Step 2 Remove battery. Remove the battery. Step 3 Remove metal blade. Step 4 Separate plastic cover. Step 5 Remove switch. Step 6 Remove motor.
Why are my Wahl Clippers not cutting?
If your Wahl Clippers or Trimmers won’t cut, you may want to first check the following: Test for bluntness: if your blades are blunt, sharpen or replace them as soon as possible. Check for lubrication: if your clipper blades are dry, switch it on and add two drops of oil to the blades.
How do I open Wahl?
No parts specified. Step 1 Disassembling of Wahl Lithium Ion Trimmer. Begin by removing the rubber grip along the handle. Remove the screws from the top to take the metal piece and plastic part off. Add a comment. Pry open the plastic cover into two separate pieces. Here is the final result.
Can I clean my clippers with vinegar?
The acidity of vinegar makes it a natural cleaning product that will combat mold and bacteria. Fill a container with distilled white vinegar. Remove any accessories from the clipper, such as blades or foils. Place removable parts in the vinegar and allow them to soak.
Can you use water to clean clippers?
Remember not to use water to clean your clippers – this could cause them to rust.
How do I change the battery in my Wahl personal trimmer?
Battery Installation/Replacement: Holding the trimmer with the cutting head facing you, pull the aluminum casing off, toward you. Insert one AAA battery. Replace the battery compartment cover. To maximize battery life, turn the trimmer “OFF” immediately after each use.
Why won’t my clippers move?
If the motor won’t move you might have just jammed it with small specs of hair. If you use the oil provided with the trimmer it will lube the motor and should solve the problem. If not then you can assume you must replace the motor.
How do you clean and sharpen Wahl hair clippers?
You can soak your blades in a blade cleaner before or after use. Pour a small amount of blade cleaner into a bowl and place your blades inside. Allow them to soak for 10 minutes to loosen any grime that remains in between the clipper blade teeth. Set them on a clean towel and wipe them completely dry.
How do you remove a Clipper lighter?
Pull firmly on the metal piece that helps the flint make a spark. This will remove the “poker” from the lighter. Remove the piece at the bottom of the poker. The old flint should fall out.
What is the difference between clipper blades and Clipper Combs?
Plastic combs are affordable, durable, and easy to use, but may require multiple passes over the coat to achieve the desired cut. Stainless steel blades are more costly, but slide through the coat easier and require fewer passes to achieve a smooth finish.
How do I contact Wahl?
+1 800-767-9245.
How do you clean battery Clippers?
Cleaning your clippers is easy and painless. “Simply brush off any hair left on the blades, then spray a multipurpose disinfectant on them after each use,” says Cardoso.
How do you know if a Clipper is open or closed?
When the taper lever is open it cuts less hair, and the blade is at it’s longest cutting position. When you push the taper lever up towards the front of the clipper it’s called closing the blade.
What does the lever on Wahl Clippers do?
The taper lever allows you to change the closeness of your cut between guide comb lengths. Moving the lever up for a closer cut, and down for a longer cut. This is particularly useful for fading and blending as you can be more precise with your cutting lengths.
Where do I send my Wahl Clippers for repair?
Step 1: Call 1-800-PRO-WAHL (1-800-776-9245) or visit our Support Form and one of our customer service representatives can gladly assist you in. If need be our customer service team can gladly provide you with a free prepaid label to send your product back to Repair.
What happens if you don’t clean clippers?
They won’t cut properly and you’ll get painful, patchy haircuts. In addition, if you don’t clean them frequently, they’ll also get dirty. This will cause skin irritation (red spots, bumps) and might even infect your skin. As a professional, there is no excuse for having a dirty shop or equipment.
What do barbers use to clean clippers?
A simple method: Pour ¼ inch of rubbing alcohol in a dish. Brush the hair and debris from the blades. Submerge the blades (be careful not to submerge any other parts). Run the unit for 10 to 30 seconds. Repeat Steps 2 and 3 using fresh alcohol until the liquid remains clean.
