Table of Contents
For a pour less than 20L (5gal), a 1.5” layer should cure fine without overheating but for pouring more than 20L, we recommend breaking it up into multiple layers of about 1” per layer to avoid overheating. Keep in mind that FlowCast® is not recommended for pouring anything less than 1/2 inch.
How deep can you pour casting resin?
Resin can be poured up to 2” thick per pour, and up to 4” depending on the volume of the pour. Step 5: Use a heat source such as a heat gun to remove any bubbles by adding a small amount of heat to the surrounding area.
How thick can you cast epoxy resin?
As long as you pour in 1/8″ layers, you can go as thick as you like. The reason we recommend this thickness is two-fold: first, it allows the bubbles to escape properly, and second, it avoids any excessive overheating of the resin. So for best results always pour in a 1/8″ layer, and you’re good to go!Feb 6, 2021
Why does my resin turn yellow?
Epoxy resin turns a yellow hue due to exposure to a myriad of elements. High temperatures, excessive amounts of water, and UV light can all cause the epoxy to change from clear to yellow in tint. Epoxy hardeners can also experience a yellowing discoloration that compounds the epoxy’s off-color issues.
What is considered a deep pour epoxy?
With the ability to pour the resin between 2-4 inches deep you are guaranteed a solid finish that won’t warp when exposed to heat or moisture. The depth of the pour also protects it from breakage, and guarantees a solid, non-flex shape.
How thick is a coat of epoxy?
Epoxy thickness ranges from . 2 mils to 250 mils (1/4”) or thicker. Three main factors determine which thickness is right for your application. Condition of the concrete—The level of damage that the concrete has sustained will play a major factor when determining how thick the epoxy floor coating should be.
What happens if you pour resin too deep?
If your epoxy pour is too thick, the reaction can create too much heat, resulting in a product that does not cure properly with cracks or excessive bubbles. This creates a rough surface for the next layer of epoxy to stick to.
Can you pour epoxy 2 inches thick?
The 2:1 Ratio Deep Pour Resin formula is designed specially for deeper casting. Our Deep Pour Epoxy Resin is not made for coating or thin layers. Deep Pour Resin is made for casting half an inch to 2 inches deep. We recommend pouring a minimum of 1/2 inch depth up to 2 inch depth when working with Deep Pour Resin.
Why is my resin thick?
Temperature If it’s colder than that, the resin will be thicker and harder to mix, will have more bubbles and will take longer to cure until it’s dry to the touch.
Can you layer casting resin?
Luckily layering resin is very simple… if you’ve learned to pour one layer of resin you’ve pretty much got the concept. The art of layering is really all about timing. Add the layers too close together and they’ll mix… wait to aaaaaannnnnnnd you’ve waited a long time.
Why did my deep pour epoxy crack?
So, what exactly causes epoxy to crack? The most common reason is the epoxy got too hot while curing, causing it to cure faster and unevenly. The changes and differences in tempurature throughout the pour caused expanding and shrinking, which in turn cracked the already cured areas.
Can you epoxy uneven concrete?
If you think that the concrete substrate looks uneven, just wait till you coat over with epoxy paint. Epoxy is glossy and this will lead to all dents, cracks, holes and trowel marks of the concrete being revealed and magnified.
What happens if you overheat resin?
If your resin overheats and smokes, you do not want to put it into a plastic or cardboard container. These can also leak or worse — catch fire. Do not throw the hot resin in your trash! The reaction is still occurring and can melt your trash can or start a fire.
What’s the difference between resin and epoxy?
Epoxy coating resin has a more viscous consistency as compared to casting resin. It dries or cures faster than casting resin. Compared to casting resin, epoxy coating resin has relatively shorter processing times. Epoxy coating is more resistant to mechanical influence as compared to casting resin.
What is the best resin for deep pours?
MAS Deep Pour Epoxy Resin System is the best epoxy for deep pour. It features a 100% solid, two-component, three to one by volume mix ratio formulated for deep pour casting, encapsulating and molding applications.
Why did my resin harden so quickly?
Resin kits have a minimum and maximum mixing amount. Too much resin and hardener mixed together produce too much heat too quickly. 2. When using paints and other solvent-based colors in resin, these can sometimes speed up the resin curing reaction and cause the mixture to heat up too quickly.
Can I pour multiple layers of epoxy?
Can I Apply Multiple Coats Of Epoxy Resin? Yes, you can apply a second coat of resin if you need to fix a mistake or a surface imperfection. You can also pour multiple layers if you need to cover areas of high relief, if you’re pouring into a mold or if you simply like the look of a thicker coat.
How thick can you pour epoxy resin floor?
The thickness of epoxy flooring can range from anywhere between 300 microns (0.01 inches) and 5mm (⅕ inch). 300 microns is the thinnest that you can go. 5mm is the thickest you can choose, but instances have arisen before where a floor needs a coat that is 1 cm (0.4 inches) thick.
How thick does a resin floor need to be?
How thick is an epoxy resin floor? Epoxy resin floors vary in thickness dependent on the intended use: Floor seal which is applied in two or more coats and is generally solvent or water-borne has a typical thickness of Up to 150 μm. The intended use is as a Light duty dust-proofing and sealing of concrete coat.
