Table of Contents
Luckily, you can cut that hefty price tag by nearly 50 percent—if you’re willing to do the work yourself. Most home centers sell vinyl siding, and the materials come with fairly complete instructions. Plus, the tool requirements are also pretty modest. ➡ You love DIY projects.
Is it hard to do your own siding?
Most types of siding are relatively easy to install. If you own a miter saw, you’ll find it easy to make square cuts on most types of horizontal siding. Fastening is seldom difficult; the main challenge is finding the studs to nail to (unless your house has plywood or OSB sheathing).
How much does it cost to install vinyl siding yourself?
Vinyl siding installation ranges in cost from $2.50 to $10.75 per square foot. Size matters. Homeowners with a 1,000-square-foot home can expect to pay between $2,500 and $10,750 for vinyl siding. Homeowners siding a 4,000-square-foot home can expect a bill ranging from $10,000 to $43,000.
Can I do vinyl siding myself?
Choosing the DIY Route: Siding Installation is Not for Beginners. If you don’t have any experience with installing siding on a house, it’s probably best that you reach out to a trained contractor for the job. While it looks relatively straightforward, installing siding isn’t a job for beginner DIYers.
Do I need a permit to replace siding on my house?
All new construction and any structural modifications made to an existing structure require a building permit. Re-shingling a roof, replacing windows, or replacing siding are considered maintenance and do not require a permit. Re-siding is considered maintenance and does not generally require a permit.
How much does it cost to put vinyl siding on a 1500 sq ft house?
The national average range for installing vinyl siding is between $7,500 and $12,000, with most homeowners spending around $9,000 to install 1,500 sq. ft. of vinyl siding in a mixture of lap siding and shingle-look planks. The low cost for this project is around $4,500 for 1,500 sq.
How much does it cost to side a 1500 sq ft house?
An average 1,500 square foot house would cost around $7,700 for standard aluminum siding and upwards of $11,000 for custom grades after labor and material costs.
How much does it cost to put vinyl siding on a 1200 square foot house?
Cost to Vinyl Side a House Total Square Footage Average Range 1,000 sq ft $3,000 – $12,000 1,200 sq ft $3,600 – $14,400 1,500 sq ft $4,500 – $18,000 2,000 sq ft $6,000 – $24,000.
What is the cheapest way to side your house?
Vinyl siding is cheap, ranking among one of the least expensive ways to side your home. Many homeowners are happy with the look of vinyl siding. Vinyl’s look is improving, too, with technological advancements in texture and colorfastness. You can also paint it if you want.
How much does it cost to side a 2000 sq ft house?
Siding costs between $3 and $11 per square foot with the average homeowner spending $4,300 to $15,800 to install on a 2,000-square-foot home. The total cost to replace siding depends on the size of your home, the number of stories, and the materials used.
What is the cheapest siding material?
Wood siding is considered the most economical material to use for your exterior home decorations since wood materials are considered cheap.
What do you put under vinyl siding?
Sheathing Nailability Vinyl siding can be installed over common wood sheathings such as plywood, oriented strand board (OSB), or other materials (e.g., foam plastic insulating sheathing).
Should vinyl siding be staggered?
Since vinyl siding moves as the temperature changes, make certain that the panels can move freely in a side-to-side direction once fastened. Stagger the siding end laps so that no two courses (rows of panels) are aligned vertically, unless separated by at least three courses.
How much do you overlap vinyl siding?
Mind the Overlaps Always refer to the installation guide on the particular vinyl siding that you’re installing, but most vinyl siding panels should overlap each other by at least an inch. Add 3/8 in. on hot days because the siding will contract when the temperature drops.
How long does siding take to install?
Every house is different, but a typical tear-off and siding installation project may take between 7 to 14 days. There are many things that can extend the time such as the size of your house, whether you’re using prefinished siding or if it needs to be painted, and unexpected repairs.
What home renovations require a permit?
Home Improvement and Renovations that Always Require a Permit Fencing installation and repair. Window installation. Plumbing work. Electrical work. Structural changes. Many HVAC maintenance projects (like installing a new water heater). Additions and remodeling projects (even including sheds and garages).
Can you get a permit after work is done?
If your contractor completes work without a permit, you’ll be responsible for footing the bill after the fact. You can file for a permit after the work is complete, but it’s unfortunately going to cost you some extra money.
How much does it cost to put vinyl siding on a 1600 sq ft house?
The average cost to install vinyl siding on a 1,600 sq. ft. home is $4,800–$5,600, or $3.30 per square foot installed depending on the size of your home, quality of siding, and the number of accent pieces. Higher-quality siding on the same house will cost between $10,200 and $11,100 or $6.70 per square foot.
Does vinyl siding increase or decrease home value?
Adding new vinyl siding to your home can increase the value by approximately 76.7% of the project cost, according to Remodeling Magazine.
Can vinyl siding be installed over wood siding?
You can only install vinyl over wood siding if the wood is in good condition, without rot or mold. If there isn’t a moisture barrier beneath the old wood siding, you’ll want to install one over it before you add the new vinyl siding. Window and door frames may need to be adjusted to match the new thickness of the wall.
