Table of Contents
How do I know what nail type to use?
Rule of Thumb #1 – Use a nail that is at least 3 times the length of the material you are nailing through. For example, if you are nailing 1/2″ sheathing on an exterior wall you should use a nail that is at least 1 1/2″ long. 1/2″ x 3 = 1 1/2″.
What is the difference between pin nails and brad nails?
For starters, brad nailers use a much larger 18 gauge nail. This nail has a much larger diameter head, which is why a brad nailer leaves a visible nail hold that must be covered with putty. Pin nailers, on the other hand, use a smaller 23 gauge nail.
How big is a pin nail?
Pin nails are 23-gauge and they’re available in headless and slight-headed varieties. The big advantage to pin nails is that they leave such a tiny hole, it will usually disappear into the grain of the wood or be filled up with paint.
What can you use a brad nailer for?
A brad nailer is a smaller version of a standard finish nailer and typically is used for attaching small moldings and trim to a woodworking project.
What is a pin gun used for?
The smallest size of fasteners are normally 23 gauge (0.025 inches in diameter), commonly called “pin nailers” and generally having no head. They are used for attaching everything from beadings, mouldings and so forth to furniture all the way up to medium-sized (7 to 8 inch) baseboard, crown molding and casing.
How do you know what size fake nails to get?
False nails usually come in sets of 20/24, (mine included,) so you don’t have to file too much, and the spares can come in handy later on. You want to pick a size that will be about half a millimetre smaller than your cuticle once it’s filed to match your natural nail shape.
What kind of nails do I use for framing?
Nails that are too long or fat are difficult to drive and can split wood, while short or thin nails just don’t do the job. The best nails for framing are 3 1/2 inches long. These are called 16-d, or “16-penny,” nails.
Can I use pin nails for crown molding?
The pin nailer is the most delicate and smallest of the family of finish nail guns. On the other hand, the brad nailer is a much more versatile power tool. You can use it for most of the finish nailing work including woodworking, carpentry, installing crown molding, window and door casing, wainscoting, etc.
Can you use a pin nailer for quarter round?
For the most part, the best tool for nailing quarter-round is a brad nailer. Plus, because they have heads (unlike the pins shot by 23ga pin nailers), 18ga brads have better holding power and we recommend a quality 18ga brad nailer for quarter round projects over a pin nailer.
What are 23 gauge pin nails used for?
Delicate Moldings and Pre-Finished Crown When it comes to delicate moldings or pre-finished trim, pros will often switch to a 23-gauge pin nailer. In these applications, an 18-gauge has the tendency to split the wood, especially hardwoods, or leave unsightly marks.
What size trim nails pin?
Nailers that shoot the biggest trim nails—15 and 16 gauge—are usually called “finish nailers.” Midsize 18-gauge nailers are called “brad nailers.” The smallest nailer, the 23-gauge, is usually called a “pinner” or “micro pinner.” This is the gun I usually grab for nailing large 3/4-in. -thick baseboard and trim.
What size do brad nails come in?
Brad nail length ranges from 1/2-inch to 2 1/2-inch. Versatile nails with 15- or 16-gauge diameter designed for thicker cuts of wood. Available in collated strips for nail guns or individual pieces.
What is the smallest Brad nail?
Most often support 18-gauge brad nails with a range of 5/8 to 2 1/8 inch in length. These are the smallest kind of nail and are almost invisible over a wood surface. You will not even have to refill the nail holes when using these brad nails.
Can a Brad nailer be used for framing?
Finish Nailers and Brad Nailers These are versatile tools for a homeowner to own, quite affordable in cost and useful for a variety of purposes—they will work for light framing work, too.
What can you use an 18 gauge brad nailer for?
18-gauge brad nailers shoot a thin nail between 3/8” to 2” depending on the model. They leave a smaller hole thanks to their small head and so are less likely to split thinner wood. They’re the ideal nailer for attaching casing to window and door jambs because they’re less likely to blow out the connections.
Can a Brad nailer be used for baseboards?
You can use a brad nailer to attach baseboards to the wall, though sometimes a finishing nailer might be best. Brad nails are smaller and thinner, ideal for delicate pieces of trim. Finish nails are thicker and have a stronger grip, typically the better choice for tall and long pieces of a baseboard.
What’s the difference between a brad nailer and a finish nailer?
The primary difference between a brad nailer vs a finish nailer is that the brad nail gun shoots 18-gauge nails whereas 16-gauge or 15-gauge nails are used in the finish nailer. The small 18-gauge brad nail helps you to attach delicate trims without splitting the trim.
How should fake nails fit?
Place the fake nail just above the cuticle (keep it straight as you don’t want any crooked looking nails) and then press down onto the nail bed. Saunders says to press with the orange stick instead of your finger or nails so that they won’t get glued together.
Do press-on nails come in different sizes?
Offer different size sets. Like a small, medium or large size. So in the small size press-on set, you’ll include thinner nails like size 2 and 5-9, 2. In a medium size set you’ll offer 0-7, and in a Large set you can offer double zero through size 5, 2 of each for every size (small, medium or large).
