QA

Quick Answer: Is It Easy To Replace Diy Corolla 2009 Serpentine Belt

How much does a mechanic charge to replace a serpentine belt?

Of course, it depends on your make and model as well as labor costs, but in general a replacement serpentine belt costs around $70-$200 (plus taxes and fees), including around $50 for the belt and around $150 for the labor.

What is the accessory belt?

Accessory belts are used to drive the air-conditioning compressor, power steering pump, water pump and the alternator. In more modern cars one or two belts – known as the serpentine belt because of the way they twist around multiple pulleys – do all of these jobs.

How much does it cost to change a serpentine belt at Jiffy Lube?

How much does it cost to replace a serpentine belt at Jiffy Lube? The replacement cost is only going to be between $90 and $200 in most cases. The belt itself will cost between $25 and $75 while the labor costs will probably be between $75 and $120.

How long should it take to replace a serpentine belt?

It usually takes approximately thirty minutes for a mechanic to replace a serpentine belt. With the right tools and equipment, an auto mechanic can complete the process within thirty minutes to an hour.

What would be a reasonable cost for a serpentine belt and replacement parts and labor )?

Serpentine Belt Replacement Cost – RepairPal Estimate. Labor costs are estimated between $54 and $69 while parts are priced between $49 and $59. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

Is it hard to put a serpentine belt back on?

Serpentine belt replacement is easy because today’s automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning. Just rotate the tensioner, remove the old belt and install a new one.

Why is my Toyota Yaris squealing?

Common reasons for this to happen: Failing Water Pump Pulley: The most common cause of squealing or squeaking from the timing belt cover is the water pump pulley. Serpentine or V-Belt Slipping: Another common cause here is noise transference from a slipping serpentine or V-belt.

When should the timing belt be replaced on a Toyota Yaris?

Although timing belts are critical, there’s no need to replace them regularly –unless explicitly recommended in your Toyota owner’s manual. Some automakers recommend changing a timing belt between 60,000 and 100,000, others don’t.

How tight should a serpentine belt be?

In many applications, the serpentine belt needs only to be reasonably tight. The belt should have about a half an inch of play when at the appropriate tightness. If there is less than a half an inch, the belt will need to be loosened, if there is more, it will need to be tightened.

How much does it cost to replace an alternator Toyota Corolla?

Replacing the alternator in a toyota corolla will cost around $450 in total on average. This includes around $300 for the parts and $150 for the labor costs.

How can I test my alternator?

More videos on YouTube Get a multimeter. Set your multimeter to DCV (DC Volts) above 15. Make sure your alternator’s positive and negative terminals are clean. Put the multimeter’s black cable to the negative terminal and the red cable to the positive terminal. Look for an ideal alternator reading of around 12.6.

Does a 2010 Toyota Corolla have a serpentine belt?

A failing drive belt could affect the performance of your vehicle’s auxiliary systems, not to mention a loud squealing sound from under the hood. Consider having having your drive belt inspected or replaced to keep your 2010 Toyota Corolla running at its best. From 201003 to 201103.

What does the serpentine belt do?

What Does a Serpentine Belt Do? The serpentine belt plays an essential role in running your car’s systems, explains TheDrive.com. It powers the alternator, the power steering pump, the air conditioning compressor and, in some vehicles, the water pump. The serpentine belt rotates constantly when the car is running.

What happens when the serpentine belt breaks while driving?

A broken serpentine belt will immediately lead to a loss of power assist for the steering system. A broken serpentine belt will stop the water pump from circulating antifreeze through the cooling system. This ultimately means that once the serpentine belt breaks the engine can overheat anytime or anywhere.

How much does it cost to replace a drive belt?

The driving belt replacement cost is usually just between $100 and $200 in most cases, with the belt and part itself costing between $28 and $80, while the labor costs will be between $75 and $120 total.

How do you know when your serpentine belt is going bad?

If you suspect your serpentine belt is failing, watch out for the following symptoms: Squealing noise from the front of the vehicle. If you notice a squealing noise coming from the front of your vehicle, it could be from the serpentine belt. Power steering and AC not working. Engine overheating. Cracks and wear on the belt.

How much does it cost to replace a serpentine belt and pulley?

The average cost for a drive belt tensioner replacement is between $211 and $239. Labor costs are between $73 and $93, while parts are priced between $138 and $146.

Does Walmart change serpentine belts?

Walmart does replace serpentine belts at some Auto Care Centers as of 2021. The price can range from $150 – $200 for replacing the serpentine belt, which includes the belt and labor. It is recommended to call your local Walmart Auto Care Center beforehand to see if the store offers this service.

How long does it take to change an alternator and serpentine belt?

Replacing an alternator can take up to about two hours or so at a mechanic but could take longer if you opt to get the job done yourself and you’re new to this kind of a repair.

How far can I drive with a broken serpentine belt?

How long will my car run with a broken serpentine belt? There are a few variables involved in the answer, but it should be able to run between 20 to 90 minutes. If it is a hot summer day, your engine can overheat very quickly without the coolant being pumped through the radiator.