Table of Contents
How do you make a pendant necklace?
Pinch Bail Insert one notch of the pinch bail into the hole of the bead or pendant at one side. Insert the other notch from the other side. Squash the pinch bail tightly with flat nose pliers. Now you can pass a chain, a ribbon, a cord or any type of necklace through the pinch bail to finish a pendant necklace.
How do I make a locket pendant?
How to Make a Vintage Locket Step 1: Hammer Out Two Nickels. Use a smooth faced hammer on a smooth surface. Step 2: Heat the Metal. Step 3: Make a Bottle Cap. Step 4: Make the Wire Form. Step 5: Roll the Edge Over. Step 6: Dome the Cap. Step 7: Polish the Locket. Step 8: Cut the Hinge Grooves.
How do you make a pendant necklace with a picture?
Steps: Scan two pictures (one picture for each side of the pendant) into the computer. Cut out the pictures and words. Cut a microscope slide in half using a glass cutter. Sandwich the image between the two pieces of glass. Wrap the edges of the glass with foil soldering tape.
How do you make a metal locket?
Measure out two 1-inch (2.5-cm) diameter discs from 20-gauge (0.8 mm) sterling silver sheet, then cut them out. Cut two more 1-inch (2.5-cm) diameter discs from 26-gauge (0.4 mm) sterling silver sheet. Use a divider tool to mark the shape of all four discs into the sheet metal before cutting out the discs.
How do you make a locket picture at home?
Upload your image to a website, computer program, or smartphone app. Some image editing apps include Photo Editor, Photo Resizer, or Image Size. Some websites like Locketstudio.com do all the work of resizing your image for you. Upload your image, select your locket size and shape, and download your image.
How do you make a locket out of a bottle cap?
Fold the 1/2″ wide ribbon in half and tie in a knot. Using a glue gun, glue the ends of the ribbon inside the two bottle caps, one end on each leaving the knot right at the top of the caps so that they fit together like a clam shell and the loop of the ribbon is above the knot.
How do you put a picture on a pendant?
Personalize Your Locket: Remove the Plastic Insert. Many lockets will have a plastic insert where the photo is supposed to go. Choose and Prepare the Photo. The plastic insert is perfect for choosing the photo and outlining it to the exact size. Put the Picture into the Locket. Replace the Insert.
How do you make a necklace out of construction paper?
How to Make a Paper Bead Necklace Step 1: Tear Out a Colorful Page of a Magazine. See image Step 2: Cut Out a Long Triangle. Step 3: Flip the Triangle Over. Step 4: Put Glue on About an Inch of the Smaller End. Step 5: Roll the Triangle Up. Step 6: Repeat. Step 7: Cut Your String. Step 8: Knot a Clasp to the String.
How do you make a newspaper necklace?
Make a Necklace With Newspaper Step 1: Gather Up All the Elements. To make this gather up all these elements – X-acto knife. Step 2: Cutting the Newspapers. You will have to cut 9, 1inch width strips of old newspaper. Step 3: Making Small Newspaper Roles. Put some glue on one end of the strips.
How do you make necklaces?
How to Make a Necklace: The Basics Choose your stringing material or chain. Select your beads or components. Add a clasp or knot to one end of your stringing material. String your beads, or add your components. Finish the other end of your necklace. Enjoy your handmade masterpiece!.
What is the best glue for cabochons?
Pascofix® adhesive is an extremely strong instant glue that will keep your cabochon in place. If you require a longer dry time, use Devcon® 5 Minute® Epoxy, 2-part Epoxy; it dries clear and strong. Another option for setting cabochons are the no-glue Cab-Tite™ settings.
How thick should a chain be for a pendant?
The gauge of our most popular chains ranges from 0.9mm – 1.7mm, so unless you have a particularly large pendant to accommodate, pick something within this size range. We would suggest 0.9mm – 1mm as a good starting point for most lightweight pendants.
What attaches a pendant to a necklace?
A bail (also spelled “bale”) is a component of certain types of jewelry, mostly necklaces, that is used to attach a pendant or stone. The bail is normally placed in the center of the necklace where the pendant hangs. Some bails are made so a pendant can be attached after the necklace production is completed.
How is pearl jewelry made?
A cultured pearl is created by placing a piece of mantle tissue inside the mollusk which then deposits layers of nacre around the nucleus, dissolving it and creating the pearl.
What wire is used for pearls?
It’s a popular size of wire to use with pearls and tiny gemstone beads, which normally have smaller holes than other beads. 24 gauge jewelry wire is a good all-purpose wire diameter. 24-gauge wire is fine enough to fit through most gemstone beads, and is durable enough to make good wire-wrapped loops.
How do you get a photo to fit in a locket?
Use a scissors or a craft knife to neatly cut the photo to the exact size of your template. Glue the photo into the locket recess. Place a dab of glue on the back of the photo. Gently insert it into the locket.
How do you make a tiny picture for a locket?
With OddPrints you can crop and resize images of your loved ones as small as you need to fit into any locket or charm. Whether it is a circle, oval, heart or something completely unique. Upload your photo, enter the size you need as a rectangle and we’ll send you the prints ready to trim to the shape you need.
What can you make with bottle caps?
18 Bottle Cap Art Projects & Craft Ideas Bottle Cap Ladybugs. This is a cute and easy way to use up old bottlecaps and it’s a great project for kids to take part in. Magnets. Bottle Cap Necklaces. Ornaments. Mini Pincushion. Bottle Cap Spiders. Earrings. Bottle Cap Coaster.
