Table of Contents
How do you fit a Sonoff mini?
To install Sonoff Mini you have to check how are your lights wired. Turn off the lights using breakers, then open up the wall switch. If you see live and neutral going in as well as going out. Sonoff Mini should be mounted inside the wall behind the switch.
How do I connect my Sonoff mini to WIFI?
Enter “Quick pairing mode” during the first use after powering on (The Wi-Fi LED flashes in a cycle of two short and one long); Exit the mode if not paired within 3mins. Long press the pairing button for 5s to enter again (The Wi-Fi LED flashes in a cycle of two short and one long).
What is DIY mode Sonoff?
The DIY Mode is designed for IoT home automation users and developers who would like to control the SONOFF device via existing home automation open-source platform or local HTTP client instead of eWeLink App. Users can obtain device information, control the device by sending an HTTP API request.
How do I install Sonoff?
Installing the App Power up the Sonoff device and connect the appliance that you want to control (in my case, it’s a desktop lamp) Press and hold the Sonoff button for 5 seconds, so the LED green starts blinking. Go to the app and press the next button. Enter your network credentials and choose a name for your device.
How do I install Sonoff mini to home assistant?
Log in to the Home Assistant Lovelace console (usually the URL is http://homeassistant.local:8123/ ), click Supervisor at the sidebar to open the HassOS dashboard, then click the eWeLink Smart Home card to enter the add-on information page.
Can you install a smart switch without neutral?
Yes, you can install a smart switch without a neutral wire. There are some smart light switches and dimmers that do not require a neutral wire. These are great for DIY installers looking for an effective smart lighting solution.
How do I connect a smart switch without a neutral wire?
If you want to use smart switches and don’t have a neutral wire in your switch box, you can hire an electrician to run a neutral wire between the light fixture and the switch. You can also have an electrician rewire the switch and light fixture, which is potentially more expensive.
Does Sonoff switch need neutral?
The Sonoff T4EU1C is a no-neutral smart light switch with WiFi, so it only needs the active-in and active-out connections that are already found at most light switch locations. It operates by drawing a small amount of power through the light even when the light is turned off, so that it can run its own electronics.
How do you reset a Sonoff mini?
You can reset the devices wifi & network configuration settings by holding the switch down on the device for 10 – 20 seconds. You can reset all of the settings on the device (useful if you forget the configuration password) by holding down the switch for 20 – 60 seconds.
How do I put Sonoff in pairing mode?
Quickly press “SET” button on Sonoff and Slampher twice, the red LED on Sonoff/Slampher will flash one time, then press one of the ABCD buttons on the controller once for a few seconds for pairing. If you pair it with A, then you can press A to turn on/off your device.
How do I connect my Sonoff mini to my eWeLink?
Open eWeLink app, click”+”, you’ll see the pairing icons. Please select the pairing mode according to below instructions: If the led blinks like this: please select Quick Pairing Mode (TOUCH), tap Next. If the led blinks like this: a. If the device firmware is 1.6.0 or higher, please select Quick Pairing Mode (TOUCH).
What is Sonoff LAN mode?
LAN Mode enables Sonoff devices to be controlled directly on the local network using a WebSocket connection on port 8081. This enables your Sonoff devices to function on a local area network (LAN) when internet connections go down or should the Itead servers go down.
What protocol does Sonoff use?
They work using the http(s) protocol but the main drawback is that they need an Internet connection to work. Recent versions of the switch (R3) have a mode called LAN mode which allows control via the LAN and so will work even if the Internet is down.
Is Sonoff open source?
This repository offers alternative and open-source firmwares for iTead Sonoff products, based on the MQTT protocol and are natively compatible with Home Assistant, which is an amazing open-source home automation platform.
How do I set up my Sonoff smart plug?
Sonoff S31 Smart Plug Setup Guide Open the eWeLink app and log in, or tap Create new account to open a new account. On the My Home page, you can tap Add or the + on the bottom of the page. Tap Quick Pairing. Before pairing, the app will ask if you have one device or multiple device, this example used one device.
How do I connect to eWeLink WiFi?
Quick Pairing That’s why it is important that your smartphone should connect to a 2.4Ghz WiFi. As soon as your device and smartphone are both in 2.4Ghz radio band, all we need to do is open eWeLink app>>Tap “+”button>>Select “Quick Pairing” >>Complete pairing following app prompts.
How do I connect to Sonoff 4 WiFi?
1. Power up your device through 90-250v AC(50/60Hz) or 5-24v DC. 2. Press and hold one of the 4 switch buttons for 7 seconds until the wifi LED fast blinks 3 times and repeats. 3. Click the “+” icon on eWeLink to search device, select the corresponding pairing icon, click next. The App will auto-search the device.
How do you automate a light switch?
3 Easy Ways to Control and Automate a Light Switch without a Neutral Wire Get a smart light bulb. This is by far the easiest option. Get an easy install z-wave light switch. Install a Lutron light switch and gateway.
How do I control Sonoff with home assistant?
Getting devicekey manually Put the device in setup mode. Connect to the Wi-Fi network ITEAD-10000 , password 12345678. Copy deviceid and apikey (this is devicekey ) Connect to your Wi-Fi network and setup Sonoff via the eWeLink app.
