Table of Contents
Is it hard to make grommet curtains?
Grommet curtains are simple to construct, don’t require a large amount of fabric, are easy to install and operate, and look great with all types of fabrics and interiors.
Can you make curtains with grommets?
DIY Grommet Curtains Beauty2 Grommets add a modern and professional finish to any curtain panel. They also tend to cost more than regular drapes. However, adding grommets to premade or custom panels isn’t as hard as it looks. The secret to having a well-tailored grommet panel is grommet tape.
How do you keep grommet curtains evenly spaced?
Grommet panels fall into gentle pleats when in the open position, but each pleat must be adjusted every time the drape is closed. To keep them in place requires a small sleight-of-hand trick from a drapery workroom that allows you to open and close the drapes with the pleats remaining even and adjustment free.
What can I use instead of grommets?
A webbing loop is a great alternative to a grommet for things like sails, tie downs, fabric covers and more. Webbing loops are very useful, and they even have some added benefits versus installing grommets.
What is the difference between a grommet and an eyelet?
An eyelet is a small piece of metal that is used to reinforce a hole in a piece of fabric; usually made of brass. Grommets are very similar to eyelets, because they are used to reinforce a hole as well; however, grommets are typically used for more heavy duty material than eyelets.
How far apart should grommets be placed on curtains?
Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge.
Can you use curtain rings on grommet curtains?
Panels with grommets require rings that can open, slip through the grommets, and snap closed. You can also slide the grommets directly over the rod. With pinch pleat drapes, opt for eyelet rings, which feature hooks to connect to pin-on drapery hooks.
How do you make ready made curtains look custom?
TIPS: How to Hang Curtains to Look like Custom Drapes When in doubt, go high. I like to hang my rod 6 inches above the window. Have the rod extend beyond the bracket. I tend to do 2-3″, not including the finial. Add at least 10″ to each side of the window. Use wide panels. Skim, kiss or puddle. Steam.
How can I make my curtains look fancy?
How to Make Your Curtains Look More Expensive Hang them high—and wide. Mount your curtain hardware as close to the ceiling as possible for a high-end look. Use statement hardware. Upgrade basic panels by adding thicker, more substantial hardware to your window treatments. Weigh them down. Train them.
How do you use a handheld grommet tool on fabric?
How to Use A Grommet Tool. Place the anvil on a piece of scrap wood, and position the fabric with the marked spot in the center of the anvil. Carefully place the hole punch over that (as noted, here’s the same tool as the hole-setter) and hit it with a hammer.
What is a grommet press?
A Grommet Press sets self-piercing grommets/washers into paper, laminate, fabrics, foam core boards and many other materials. The neck of the grommet punches a hole in the material and is rolled into the washer to create a firm hold in just one step.
Which is stronger eyelet or grommet?
Grommets are much stronger than eyelets and used in situations that call for a more reinforced and longer lasting hold, such as permanent signage and heavy curtains or drapes.
Is grommet an eyelet?
An eyelet is a small piece of metal that is used to reinforce a hole in a piece of fabric; usually made of brass. Grommets are very similar to eyelets, because they are used to reinforce a hole as well; however, grommets are typically used for more heavy duty material than eyelets.
What is an eyelet used for?
Eyelets are metal, plastic, or rubber rings that are inserted into a hole made through another material. Eyelets may be used to reinforce the hole or to shield something from the sharp edges of the hole. More specifically, eyelets are flanged metal rings used as reinforcement for a hole in fabric or paper.
Can you turn normal curtains into eyelet?
2) Fold under 2cm at the top of the curtain panel and lightly iron. Pin the eyelet tape along the top edge of the fabric and sew into place. Draw around the inside of each ring with a fabric pen, then cut out these circles to create the eyelet holes. Finally, concertina the curtain to hang on the pole.
Is it easy to change pencil pleat to eyelet curtains?
The ready made pencil pleats were converted to eyelets. The most efficient way to shorten and convert pencil pleat curtains is to take off heading tape, turn curtain inside out, measure finished drop, and sew lining and face fabric along this line. Take a turn.
How do you hide ring clips on curtains?
HERE’S THE QUICK TIP ON HOW TO HIDE CURTAIN RING CLIPS: just pinch the back of the curtains and clip the rings an inch or so down from the top.
What is a hook belt curtain?
The hook belt is a ribbon like band sewed into the back of the pole pocket curtain. This is used to reinforce any drapery pins. Drapery pins can then be attached to rings or a traverse rod.
How much fabric do I need for eyelet curtains?
For eyelet curtains you need between 1.5 times fullness (adequate) and 2.25 times fullness (maximum). You will need to make sure you have an even number of eyelets on your finished curtains.
