Table of Contents
What is Wedging? Wedging prepares the clay for optimal use. Wedging makes the clay more pliable, ensures a uniform consistency, and removes air pockets as well as small hard spots in the clay before you use or reuse the clay for a project.
When should you wedge clay?
You should wedge at least 30 times when it’s fresh out of the bag. When it’s recycled clay, you will need to wedge it at least a 100 times if not more depending on the condition of your clay.
What are the two types of wedging?
There are various different ways to wedge clay— ram’s head, spiral wedging, and wire wedging to name a few.
How is clay prepared for pottery?
Processing Clay for Pottery. To use the wet extraction method, start by filling a bucket about 1/3 of the way with soil. Add water and use your hands to break up the soil particles as finely as you can get them. Allow the soil to hydrate for a few minutes, or preferably a few hours.
What happens if you dont wedge clay?
What happens if you don’t wedge clay when doing pottery? As previously mentioned, wedging removes air pockets from the clay. If you let your clay dry enough before firing you wont get an explosion, but an air pocket in your peice will show up very soon while wheel throwing pottery and it will mess up your piece.
What happens if there is an air bubble in clay?
Air bubbles in clay items are dangerous because they can cause explosions in the kiln. The air bubble dilates due to heat and forces the clay to crack or explode and shatter the ceramic piece. The risk of explosion increases with the temperature in the kiln.
Do air bubbles cause clay to explode?
A thin piece of clay with an air bubble will dry and fire without issue. When the kiln temperature rises, the air pockets fill with water vapor, which builds pressure as water turns to steam. The pressure of the steam causes the clay to explode from the inside.
What are the 4 main ways or techniques to form clay?
Forming Clay Hand-building. Handbuilding is exactly what it sounds like; using your hands to form an object out of clay. Slab Building. Coiling. Throwing. Extruding. Slip Casting.
What is clay slip made of?
Slip consists of clay particles suspended in water. Its consistency will vary according to use, ranging from thick cream to butter milk. It can be used to bond pieces of clay together, to decorate and protect pottery or it can be poured into a mold and used to cast objects.
What are the six stages of clay?
There are 6 essential stages of clay: 1. ) Slip. Slip is clay with added water to make it into a paste or liquid. 2.) Wet clay. Wet clay is used by many potters to produce their work. 3.) Leather-hard clay. 4.) Dry clay. 5.) Bisque. 6.) Glaze ware.
What are the 4 reasons for wedging clay?
Wedging prepares the clay for optimal use. Wedging makes the clay more pliable, ensures a uniform consistency, and removes air pockets as well as small hard spots in the clay before you use or reuse the clay for a project. When reclaiming clay, wedging ensures all the clay is incorporates together.
What surface should you wedge clay on?
Every potter needs a surface to wedge clay on, and there are many different types. The most common are plaster, plaster covered in canvas, and plywood covered in canvas. Other possibilities are concrete, granite, masonite, concrete board and hardibacker board. The simplest wedging surface is a piece of canvas.
What does it mean to throw clay?
To throw the clay means to bend it between your finger joints. The right finger is lower than the left. This is important since the discrepancy is what forces the clay to bend. As the potter’s hands move upward, the clay is stretched through the bend, with the excess clay being forced upward.
What are the 5 stages of clay?
Terms in this set (5) slip. a mixture of clay and water, the consistency of pudding. wet/plastic clay. new clay from the bag, very workable. leather hard. the clay has lost most moisture, but you can still carve into it. bone dry or greenware. totally dry clay, all moisture is gone, ready to fire. bisque.
Why is it important to score and slip clay?
Scoring and slipping. Clay pieces that are drier and harder, or that you want to join together without blending or altering their forms, traditionally must be scored and slipped (or slipped and scored). In this process slip, a liquid mixture of clay and water, is used to help weld the pieces together.
Do I need to wedge new clay?
In theory, a new bag of clay does not contain air bubbles. Nevertheless, even if your clay is brand new, it is still a good idea to wedge it. There may be some air pockets present. It is important to remove air bubbles is that they cause your piece to explode in the kiln.
What is the wedging technique?
The general idea includes throwing down the clay and rolling it into a tight spiral with a sort of kneading method. Wedging makes the clay more pliable, ensures a uniform consistency, and removes air pockets as well as small hard spots in the clay before you use or reuse the clay for a project.
What does it mean to score and slip clay?
Score and Slip Score and slip refers to a method of joining two pieces of clay together. First, score the clay; this means that you make scratches in the surfaces that will be sticking together. Then you slip it; that is you wet the surface with some slip, using it like glue.
