Table of Contents
If you plan on DIY-ing your hardwood floors, expect to pay a little less than $500 per 275 sq. feet. The average range tends to be between $1,000 to $2,400. The total cost includes renting sanding equipment along with purchasing sanding pads, wood stain, brushes and finish.
How much does it cost to refinish wood floors yourself?
Refinishing your floors yourself can cost between $500 and $1,000 depending on square footage. You can expect to pay a professional $3 to $4 per square foot to complete the same project.
Can you refinish wood floors yourself?
If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.
How much does it cost to redo a DIY floor?
Altogether, you’re looking at a DIY cost to refinish hardwood flooring between $1.50 and $5.00 per square foot. Of course, the quality of materials you choose and your local tool rental prices are the biggest factors.
What is the cheapest way to refinish hardwood floors?
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
Can I sand and refinish my hardwood floors myself?
If the scratches don’t go all the way through to the wood, you can scuff-sand your floors with a buffer and apply a fresh coat or two of finish. The hardwood floor refinishing process is easier and less expensive than sanding down to bare wood and takes less time. In a few hours, your floors will look as good as new.
How much does it cost to refinish 1000 square feet of hardwood floors?
Cost to refinish hardwood floors Room size Square feet Average cost 20×20 400 $1,000 – $2,000 24×24 576 $1,200 – $2,800 Stairs (12 to 14 steps) — $300 – $1,200 Whole house 1,000 $2,000 – $4,000.
How can I refinish my hardwood floors without sanding?
The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.
How much does it cost to sand and refinish a hardwood floor?
To completely refinish a hardwood floor—including sanding down the top layer to bare wood, then applying several coats of new finish like polyurethane—expect to pay flooring professionals $1.50 to $4 per square foot, or $340 to $900 for a 15-by-15-foot room.
Is it easy to sand your own floors?
Sanding wood floors is a time consuming but relatively easy procedure. Sanding wood floors & refinishing yourself will definitely save money, and even an inexperienced homeowner can likely do a better job than the lowest bidding handyperson who quotes on it.
How much does it cost to install hardwood floors for $1200 sq ft?
Installing hardwood flooring averages between $6 and $12 per square foot. On average, wood flooring costs between $3 and $7 per square foot for materials and $3 to $5 per square foot for labor. An estimate for installation of 1000 square feet of hardwood flooring runs between $6,000 and $12,000.
Do wood floors increase the value of your home?
Hardwood floors are one of the best flooring options for homeowners looking to increase the resale value of their home, with hardwood typically yielding around a 75% return on investment.
Is it cheaper to refinish hardwood or install laminate?
The truth is, it is almost always cheaper to refinish your floor than to replace it. When replacing, you must consider the cost of the new wood as well as the installation, plus the cost to haul your old wood floors away.
Can you refinish hardwood floors one room at a time?
If your wood floors continue into other rooms of the home, you cannot sand, stain and refinish the one area. The only way to refinish one room is to install a transition piece (or if there’s one in place already).
Can you hand sand hardwood floors?
How to sand a hardwood floor by hand? The exact same way you would with floor sanding machines, but with a lot more elbow grease! Start with a low grit like 40, climb to 60, 80 then 100. Use a handheld orbital sander, ideally with a gear-driven setting.
How much does it cost to have your floors sanded?
On average, sanding hardwood floors can cost between $. 50 to $3 per square foot. Sanding is done with large drum sanders for most of the area and belt sanders around the perimeter. Sanding usually takes several passes to make sure the hardwood flooring is smooth and blemish-free.
Is it cheaper to refinish hardwood or replace?
In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. Even if you have this, it will still be less expensive then replacing the whole floor.
Is refinishing hardwood floors worth it?
Is It Worth It To Refinish Your Hardwood Floors? Yes, it’s worth refinishing hardwood floors instead of replacing them. Refinishing is cost-effective, it’s quicker, and it’s a lot easier because it requires less labor.
Is it cheaper to refinish hardwood floors or carpet?
If you’re willing to do it yourself, refinishing hardwood isn’t an expensive project and is likely cheaper than getting carpet installed. Unless you already have one, you’ll pay to rent a sander (which will cost you something like $65 per day), plus you’ll need to buy stain and a protective finish coat.
Can you spot refinish hardwood floors?
Refinishing a floor is a big deal, and if the floor has only one or two worn areas, while the rest of the finish is in good condition, it’s more economical to make spot repairs. Done correctly, a spot repair is all but unnoticeable, provided you’ve correctly matched the finish and — if necessary — the stain.
How does Sandless floor refinishing work?
Sandless refinishing, as the name implies, involves no sanding. Instead, a technician uses a machine with abrasive pads and a liquid solution to remove surface debris from the floor. Finally, the technician rinses and details the floor, then applies a protective sealer to give the floor strength and shine.
