Table of Contents
Refinishing your floors yourself can cost between $500 and $1,000 depending on square footage. You can expect to pay a professional $3 to $4 per square foot to complete the same project.
Is it cheaper to refinish hardwood floors yourself?
Hiring a Professional. It may be tempting to DIY this project to save on the cost to refinish hardwood floors, but it’s more complicated than it looks. Refinishing hardwood floors is a time-consuming, messy, and costly job. On average, expect to pay from $500 to $1,000 to refinish hardwood floors on your own.
Can I refinish my own hardwood floors?
The hardwood floor refinishing process is easier and less expensive than sanding down to bare wood and takes less time. In a few hours, your floors will look as good as new. The job requires using a buffer, which you can rent at a home center, and a vacuum to suck up dust.
How much does it cost to refinish 1000 square feet of hardwood floors?
Cost to refinish hardwood floors Room size Square feet Average cost 20×20 400 $1,000 – $2,000 24×24 576 $1,200 – $2,800 Stairs (12 to 14 steps) — $300 – $1,200 Whole house 1,000 $2,000 – $4,000.
Can I sand and refinish my hardwood floors myself?
Professionals and amateurs alike use the same specialized tools to refinish floors. Don’t even think about the orbital sander on your tool bench; if you do it yourself, you’ll need to get the equipment at a tool-rental center. You run it back and forth along the wood and it sands the floor with each pass.
How much does it cost to refinish hardwood floors yourself?
How much does it cost to sand and refinish hardwood floors yourself? Expect to pay a bit less than $500 per 275 square feet if you plan to DIY your hardwood flooring. The typical price range is from $1,000 to $2,400.
What is the cheapest way to refinish hardwood floors?
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
How much does it cost to sand and refinish a hardwood floor?
To completely refinish a hardwood floor—including sanding down the top layer to bare wood, then applying several coats of new finish like polyurethane—expect to pay flooring professionals $1.50 to $4 per square foot, or $340 to $900 for a 15-by-15-foot room.
How can I refinish my hardwood floors without sanding?
The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.
How do you refinish hardwood floors for beginners?
Step-by-step procedures for refinishing hardwood Sand everything with the lower grit (Rougher) paper. Sweep, vacuum, and wipe down everything. sand with the high grit (finer) paper to get a smooth finish. sweep, vacuum, and wipe down everything. with a clean mop or rag, wipe down the entire floor with mineral oil or water.
Is refinishing hardwood floors worth it?
Is It Worth It To Refinish Your Hardwood Floors? Yes, it’s worth refinishing hardwood floors instead of replacing them. Refinishing is cost-effective, it’s quicker, and it’s a lot easier because it requires less labor.
Is it cheaper to refinish hardwood floors or carpet?
If you’re willing to do it yourself, refinishing hardwood isn’t an expensive project and is likely cheaper than getting carpet installed. Unless you already have one, you’ll pay to rent a sander (which will cost you something like $65 per day), plus you’ll need to buy stain and a protective finish coat.
How much does it cost to refinish hardwood floors per square foot?
Cost to Refinish Hardwood Floors Refinishing hardwood floors costs $1,769 on average with a typical range between $1,075 and $2,490. You can expect to pay anywhere from $3 to $8 per square foot.
How hard is it to refinish hardwood floors yourself?
If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.
Should I sand my hardwood floors myself?
If this is your first time refinishing floors, you are probably better off hiring a professional to sand and refinish your floors. Not only will your floors look better and last longer, but they will be finished much faster if you hire a professional (so you can move in sooner).
How hard is it to sand your own floors?
There’s really no getting around it – sanding your floors is hard work and physically tiring. Mostly, this is down to the floorboards not being completely flat which means that the drum of the floor sanding machine won’t be able to reach all areas of the floorboards in one go.
How can I make my old hardwood floors look better without refinishing?
3 Approaches to Refinishing Hardwood Floors Without Sanding Use a store-bought chemical abrasion kit. Buff and recoat floors with polyurethane. Use a revitalizer.
Is it cheaper to refinish hardwood floors or replace with laminate?
The truth is, it is almost always cheaper to refinish your floor than to replace it. When replacing, you must consider the cost of the new wood as well as the installation, plus the cost to haul your old wood floors away.
Can you refinish hardwood floors one room at a time?
If your wood floors continue into other rooms of the home, you cannot sand, stain and refinish the one area. The only way to refinish one room is to install a transition piece (or if there’s one in place already).
How do you revive old hardwood floors?
Refinish Hardwood Floors in One Day: How to Refinish Wood Floors Step by Step Step 1: Buy special hardwood floor refinishing kit. Step 2: Clear the floor and clean the room. Step 3: “Sand” the floor with liquid. Step 4: Damp mop and touch up the floor. Step 5: Apply the new finish…fast!.
How does Sandless floor refinishing work?
Sandless refinishing, as the name implies, involves no sanding. Instead, a technician uses a machine with abrasive pads and a liquid solution to remove surface debris from the floor. Finally, the technician rinses and details the floor, then applies a protective sealer to give the floor strength and shine.
