Table of Contents
Mortar Calculation for Plastering work Density of Cement = 1440 kg/m3. Sand Density = 1450-1500 kg/m3. Density of Aggregate = 1450-1550 kg/m 3 How many KG in 1 bag of cement = 50kg. Cement quantity in litres in 1 bag of cement = 34.7 litres. 1 Bag of cement in cubic metres = 0.0347 cubic meter.
How do I calculate how much cement I need for plaster?
Calculation of quantity of material for 12 mm thick plaster of ratio 1: 6 (1 Cement:6 Sand) in the wall for 100 Sqm Quantity of Cement = 2/(1+6) × 1 (1 Ratio of cement) In Kg = 0.30 × 1440 (Density of cement = 1440 kg/m3) Quantity of Sand = 2/(1+6) × 6 (6 Ratio of sand) In Cubic Feet = 63.558 cft (1 Cum = 35.31 cft).
How much sand and cement do I need for plastering?
Cement:Sand = 1:5, 1 part of cement and 5 parts of sand in a mortar). The overall thickness of plastering should be minimum 20mm including two coats. The Volume of each cement bag = 50Kgs/1440 = 0.0348 m3.
What is the Labour cost for plastering?
Wall Plaster Cost For 1000, 2000, 3000,4000, & 5000 sq. ft area Description Rate Per sq.ft 1000 sq.ft Wall Plaster Labour Rs.25/- per sq.ft Rs.25/-* Rs.25,000 Material Cost (Plastering M-Sand, Cement) – Rs.35/- per sq.ft Rs.35/-* Rs.35,000 Total Cost of Wall Plaster Rs.60/- per sq.ft Rs.60/-* Rs.60,000/-*.
How much plastering can be done in a day?
1) Plastering with any mortar 12mm (5”) thick – 3 masons, 3 mazdoors and 1 bhisti can plaster 40sqm (400a ft) per day.
How many 50kg bags of cement are in a cubic meter?
Procedure To Calculate Cement Bags In 1 Cubic Meter: Weight of 1 bag cement = 50 kg. =0.0347 cum. = 6.25 bags.
How do you calculate square footage for plastering?
The dry volume of mortar required for external brick wall plastering = 1.33 X Dry volume of plaster = 1.33 X 0.1858 = 0.2471 cum. 1.42 (71 kg) bags cement and 7 cu ft sand required for 100 sq ft area of external brick wall plastering. Since wet volume is always less than the dry volume.
How do you measure a room for plastering?
Measure all the way around the room by starting in any corner and working your way around the walls and finishing in the same corner – you should end up with 10.2 m. With a calculator, multiply 2.4 by 10.2 and you get 24.48m2 (you could potentially round this to 24.5m2 for ease).
How many bags of cement is 1m3?
Approximately 29 bags are required for 1m3 of cement.
How many kg is 1m3 of cement?
conversion result for Portland cement: From Symbol Result 1 cubic meter m3 = 1,505.74.
What is the correct mixture of cement and sand?
In terms of the ratio for concrete, it depends on what strength you are trying to achieve, but as a general guide a standard concrete mix would be 1 part cement to 2 parts sand to 4 parts aggregates. For foundations, a mix of 1 part cement to 3 parts sand to 6 parts aggregates can be used.
Which cement is best for plastering?
Best cement for plastering:- Best cement for plastering used in construction is OPC- 43 (Ordinary Portland cement grade 53) and PSC (Portland slag cement) brand of UltraTech Cement, ACC gold water shield, ACC Suraksha power, Ambuja Cement, Sagar cement, Dalmia Cement, Shri cement, Birla cement, etc.
How many bags of cement do I need for 12×12?
Regarding this, “how much concrete do I need for a 12×12 slab?”, at 4 inches thick, generally you will need approximately 1.76 cubic yards or 47.52 cubic feet or 1.35 m3 (either 104 bags of 60lb or 80 bags of 80lb) of premixed concrete for a 12×12 slab, at 5 inches thick slab, 2.22 cubic yards or 59.90 cubic feet or
How many bags of cement do I need for a 10×10 slab?
Regarding this, “how many bags of concrete do I need for a 10×10 slab?”, at 4 inches thick, generally you will need approximately either 74 bags of 60lb or 56 bags of 80lb premixed concrete for a 10×10 slab, at 5 inches thick slab, either 93 bags of 60lb or 70 bags of 80lb premixed concrete are required, while at 6
How do you calculate plastering?
Note: By considering dry density of sand = 1550 kg/m3.Strength of plastering/nominal mix: Plaster type Description 15mm 15 MM cement plaster is required on the rough side of 9” and 4.5” wall. 18mm 18 MM thick cement plaster with neat cement slurry is required for making ‘Dado’ with the cement concrete flooring.
Which sand is best for plastering?
Basically river sand are used for any plastering work. Generally, in any plastering work plasterers are used natural sand, crushed stone sand or crushed gravel sand.which sand is best for plastering ? IS Sieve Size %age Passing 2.36 mm 95 – 100 1.18 mm 90 – 100 600 micron 80 – 100 300 micron 20 – 65.
How much area can one bag of cement cover?
One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about . 375 cubic feet. For example, if you need to cover 33.333 cubic feet, using 60-pound bags of concrete, divide 33.333 cubic feet by . 45 cubic feet to get 74.07 total bags of concrete.
How many square feet is a bag of cement?
About 0.38 cement bag is used per sq ft of construction. So, around 400 bags of cement (50kg each) are consumed for 1000 sq ft home.
How many bricks are in 1m3?
Regarding this, “how many bricks in 1 cubic meter?”, its depends on size of bricks, its application and manufacturer, generally there are 500 bricks in 1 cubic meter.
What is the mix ratio for plastering?
Plaster Mix Ratio Mix cement and sand in the ratio of 1:6 (1 cement:6 sand) for inner plastering of bricks. And for outer plastering mix it in the ratio of 1:4. On a brick wall never do plastering of thickness more than 12 or 15mm.
How many kg is 1m3?
1 m3 / cu m = 1,000.00 kg wt.
How do you calculate concrete?
How to calculate concrete: Determine how thick you want the concrete. Measure the length and width that you’d like to cover. Multiply the length by the width to determine square footage. Convert the thickness from inches to feet. Multiply the thickness in feet by the square footage to determine cubic feet.
