Table of Contents
Concrete Construction SAWING CONCRETE Carborundum Blades. Carborundum Blade. Low cost, abrasive blades are now widely used to cut green concrete made with soft aggregates, such as limestone, dolomite, coral, or slag. These blades are made from a mixture of silicon carbide grains and a resin bond.
What is a carborundum saw?
Carborundum is the trade name for silicon carbide, an artificial crystal invented in 1890. Although not as hard as diamond blades, carborundum blades are be used to cut new or “green” concrete. Fit a carborundum blade to your circular saw, concrete saw or hacksaw.
What is the difference between a wood blade and a metal blade?
The main differences are in teeth per inch (TPI), blade material, and/or blade shape. Wood Cutting Blades normally have 5 to 10 TPI and are best for cutting most types of wood, branches, and softer materials. They will also cut nails. Metal Cutting Blades have more teeth per inch for cutting harder, denser materials.
What blade is best for cutting metal?
Ferrous blades are ideal for cutting metals that contain iron, such as stainless steel or cast iron. Choose a non-ferrous blade when cutting softer metals, like aluminum or copper. For the best results, use a diamond blade that’s rated to cut the type of metal you are working with.
What are Carborundum blades used for?
Carborundum Blade Low cost, abrasive blades are now widely used to cut green concrete made with soft aggregates, such as limestone, dolomite, coral, or slag. These blades are made from a mixture of silicon carbide grains and a resin bond. This mixture is pressed and baked.
Can I put a diamond blade on a circular saw?
Use a standard circular saw, equipped with a corundum or diamond blade, for small tasks. For slabs, it’s best to cut through the top inch, then use a sledgehammer to break off the rest. The jagged edge left below the cutting line provides a good rough edge for the new concrete to bond to.
Can you turn a circular saw blade backwards to cut metal?
You can run a saw blade backwards and it cuts pretty well. However it is not at all a good idea. The two big reasons not to do this is that saw tips are much more likely to come off if the saw blade is run backwards and that the whole saw blade is much more likely to come apart if it is run backwards.
Can a carbide blade cut aluminum?
You should be able to use a carbide-tipped abrasive cutoff wheel for non-ferrous metals like brass, aluminum, copper or lead. Carbide-tipped blades last up to 10 times longer than regular steel ones. The pitch and design of the blade you choose will also vary depending on the thickness of the metal in question.
Can I use a TCT blade to cut wood?
A TCT (tungsten carbide-tipped) blade is a re-sharpened circular saw blade. The following items can use TCT saw blade： wood, some ferrous metals, non-ferrous metals, and plastics. In general, circular saws are toothed blades designed to cut metal.
What is a carbide blade?
Carbon blades are composed of entirely carbon steel and have induction hardened teeth. The teeth pockets are milled into the backing material, and the carbide tip is brazed into the pockets and finish ground. The carbide tip is stronger and can resist more heat.
What can a carbide blade cut?
Carbide-tipped blades for portable circular saws are generally of the all-purpose variety, suitable for cutting all kinds of wood, including plywood and particleboard as well as hardboard, wallboard and plastics. In general, the more teeth a blade has, the smoother it will cut.
How long will a diamond blade last?
Diamond blades usually cost between $15 and $75. They can last between 12 and 120 hours of continuous use, depending on the quality of the blade and material they’re used to cut.
What type of saw can cut metal?
A standard, motorized circular saw is capable of creating straight cuts through most types of metal. The key to using a standard circular for cutting metal is to choose the proper blade for the project. In general, circular saws accept abrasive, metal cut-off discs for metalworking projects.
What are the different types of metal blades?
Choose a blade with 20 to 24 TPI (teeth per inch) for thin metal, 10 to 18 TPI for medium-thickness metal, and about 8 TPI for thick metal. Buy bimetal or carbide-tooth blades for longer blade life.
Can a chop saw cut concrete?
Compound miter saw heads, which can turn from side to side, are designed to make angled and beveled cuts. When fitted with a blade designed for dry masonry cutting, the saw can be used on concrete pavers the same way it is used on wood.
Which is better carbide or tungsten?
While tungsten carbide has many of the properties of tungsten itself, including its durability, strength and high melting point, it is a much better metal. Tungsten ranks at 7.5 on the Mohs scale. Tungsten carbide is extremely scratch resistant at Mohs 8 to 9, and is the hardest metal for use in jewelry.
Is carbide a diamond?
Something coated in diamond or a carbide abrasive wheel is common. If you’ve read How Diamonds Work, you know that diamond (pure crystalline carbon) is the hardest material there is. Moissanite — silicon carbide — is very close. Tungsten carbide and titanium carbide are both made of the metal combined with carbon.
Can I cut wood with an aluminum blade?
Cutting aluminum occasionally can be done on a wood cutting saw. Ferrous metals require special blades and even more care.
Will a diamond blade cut stone?
They can be used in grinders, circular saws, and tile saws to cut a variety of materials including tile, stone, marble, granite, masonry, and other building materials. Blades are available for both wet and dry cutting applications.
Why is it called a diamond blade?
These blades consist of a steel core (the base is steel plate, unlike that of the wires used in diamond wire saws) and diamond segments, which are made by combining synthetic diamond crystals with metal powder and then sintering them. The diamond segments are also known as the “cutting teeth” of the blade.
What can cut diamond?
Diamonds are cut with specialized tools that make use of diamond tipped phosphor bronze or diamond dusted steel blades. Such tools are used to exploit the structural weakness of the diamond by grooving and striking along specific tetrahedral planes.
