Table of Contents
What is glass mat used for?
Glass mat is also a stronger, more durable facing material than paper, so it’s less susceptible to structural failure or delamination. In the past, glass mat wallboard was used primarily as exterior sheathing for exterior wall assemblies because of its moisture resistance.
What is a craft sheet?
This re-usable, non-stick, multi-purpose craft sheet offers a heat resistant slick work surface for easy clean-up. Paint, glue, and embossing powders peel off and inks can be easily wiped clean.
Where will glass mat gypsum be used in a house?
Glass mat gypsum board may also be the material of choice for fast track construction projects that require wallboard to be installed before the building envelope is completely enclosed, especially in storm-prone or humid environments.
Can I use a rotary cutter on glass?
Rotary Cutting Mat Alternative Cardboard has been used by some sewers but that material is a one-time use only mat as it shreds quite easily. A glass should work well also and all these materials are smooth so you can lay your fabric out flat and get a smooth, straight cut.
Can DensGlass be used on interior walls?
DensGlass Sheathing is not intended for interior or exterior tile applications. For interior tile applications, consult our DensShield® Tile Backer brochure.
Can DensGlass be used inside?
It has a specially treated gypsum core and embedded fiberglass mats on both sides for superior moisture, fire and mold resistance. This product can remain exposed up to twelve months and is an ideal substrate for a wide variety of exterior claddings. Interior Panels are specially engineered interior gypsum panels.
What kind of drywall do you use for exterior walls?
Fiberglass-Faced Gypsum Sheathing helps exterior walls resist air, water and noise infiltration. Exterior Gypsum Sheathing is a special-purpose drywall panel consisting of a moisture-resistant, noncombustible core covered by glass-mat facers on both front and back surfaces and long edges.
What Dremel blade will cut glass?
The Dremel Glass Drilling Bit 662 is ideal for cutting holes in glass. You can drill perfect 3.2mm diameter holes. To be used with DREMEL cordless tools.
Can you use a Dremel to grind glass?
You can use the Dremel rotary tool to grind glass with special bits designed for use with glass, such as the diamond or silicon carbide grinding stones. This keeps the glass dust from spraying into your eyes and nose and helps cool and lubricate the glass surface during grinding.
Where do you use DensGlass?
DensGlass® Sheathing is a preferred substrate under brick, stone, stucco, siding and Exterior Insulation and Finishing Systems (EIFS) because of its exemplary track record.
Is DensGlass a drywall?
DensGlass 5/8-in x 4-ft x 8-ft Mold Resistant Moisture Resistant Fire Resistant Drywall Panel.
Does DensGlass need a vapor barrier?
The energy code requires continuous air barrier on either the interior or exterior wall in certain climate zones.
Can DensShield be used in a shower?
DensShield® Tile Backer is ideal for bathrooms, showers, floors, kitchens and other wet, high humidity areas.
Is DensGlass an air barrier?
It is a polymer-modified emulsion and designed for spray or roller application. The membrane is also an air and water barrier. ExoAir™ TWF is a self-adhered 40 mil (Thru-Wall Flashing) membrane.
Can you use drywall for exterior?
Mostly an interior wall type covering, drywall can be used on exterior walls if it’s protected from any long exposure to moisture, or if it’s used as a base for other kinds of siding. If it’s the outermost surface, drywall will need to be sealed to ensure that is lasts as long as possible.
Can you use drywall for exterior sheathing?
They use drywall for sheathing all the time around here. Commercial work, in particular. They yellow faced drywall is manufactured specifically for this application.
How do you cut a glass pane with a Dremel?
How To Cut Glass With A Dremel Step 1: Tape The Glass. Put masking tape along the line that you wish to cut. Step 2: Draw The Lines. Use a marker to draw a line on the tape, indicating where you will make your cut. Step 3: Run The Glass Under Water. Step 4: File Away.
How do you smooth the edges of glass?
Sand down the edges with 150-grit, 220-grit, 320-grit, then finally 400-grit sandpaper to make your glass even smoother. Then, use 1000-grit and 2000-grit sandpaper to polish the edge to perfection. Wipe the edge of the glass with a clean damp cloth once you’ve finished sanding to wipe away any leftover grit or dust.
What bit do I use to cut glass?
In general, two types of drill bits can be successfully used on glass: tungsten carbide spear-tipped drill bits and diamond-tipped drill bits; there are also diamond-coated drill bits. Carbide-tipped drill bits are most commonly used for non-tempered glass, ceramics and tiles.
What tool can cut glass?
Glass cutters and sharp knives are popular tools to cut or score glass and other materials. Saw blades can also be used for cutting thick glass sheets.
What is the grinding stone for glass?
This particular carborundum grinding stone, used by stained glass folk, seems to be pretty popular and trusted when you are not going to use a machine for edge management.
Can DensGlass be used for roof sheathing?
DensGlass Sheathing adds performance and durability to a wide range of fire-rated and non-fire-rated building assemblies. Dens® Solutions are industry trusted, high-performing fiberglass mat gypsum panels suitable for your wall, roof, ceiling and floor projects.
Is DensGlass waterproof?
It is a ready-mixed, flexible, waterproof coating which can be used on gypsum, cement or wood based sheathing substrates. Sto VaporSeal over DensGlass panels can be used on vertical above grade walls.
What is used for exterior sheathing?
There are many exterior wall sheathing options available, with wood sheathing being one of the most commonly used materials. Wood sheathing materials include plywood, oriented strand board (OSB), and waferboard. Plywood is made of whole sheets of wood that are cross-laminated.
What is DensGlass drywall?
DensGlass® is a gypsum panel with fiberglass mat facings and its widely recognized GOLD colored primer coating for superior mold and moisture resistance. For use as exterior substrate panel for walls, ceilings and soffits.
Is DensGlass a structural sheathing?
DensGlass SilverTM residential structural wall sheathing incorporates the proven glass mat Dens TechnologyTM with a moisture-resistant core to produce a residential exterior sheathing that: Provides moisture resistance.
