Table of Contents
We recommend using Wipe Out to prepare the surface for coating, which will remove any lingering and leftover waxes, sealants or glazes. Use a clean and lint-free premium microfiber towel for best results. Now that the surface is perfectly clean and residue-free, you are ready to apply your ceramic coating!.
What do you wipe down with before ceramic coating?
(1) Spray Bottle of Isopropyl Alcohol (IPA)- Spraying an isopropyl alcohol solution onto a vehicle’s exterior and wiping it clean are a paramount final step in the ceramic coating prep phase.
Do you wax your car before ceramic coating?
In this article you will learn: Ceramic coatings are one of the most durable and long-lasting protectants for your car’s paint. In fact, unless your goal is to strip off an old layer of ceramic coating, you should use a car wax and polish only before you apply a ceramic coating or paint sealant.
Can you put ceramic wax over regular wax?
The easy answer is yes, you can. You could lay the ceramic-based protectant down first, let it cure and then apply a wax.
Can you use rubbing alcohol for paint prep?
When properly diluted, isopropyl alcohol removes polishing oils and fillers, enabling you to see the true condition of your vehicle’s finish. Isopropyl alcohol, when diluted accordingly, can also be used to prep surfaces for paint, glass or wheel coatings. A common dilution ratio for this is between 10 and 15%.
What is a IPA wipe down?
A panel wipe or IPA wipe is used to clean and remove excess compounds, polishes, wax, oils, and other contaminants from your paint’s clear coat. This solution should be used throughout the paint correction process to ensure you are working with the most clean surface you can.
How do I prepare my car for ceramic coating?
How Do I Prep For A Ceramic Coating? STEP 1: WASH. Start off by properly washing your vehicle. STEP 2: CLAY. Once the surface is clean, it is important to clay the paint to remove any surface contamination that washing may not have been able to remove. STEP 3: POLISH. STEP 4: WIPE.
How do you polish before ceramic coating?
Can you ceramic coat a car without polishing?
Proper detailing shops will never just apply a ceramic coating to whatever car you drop off. Even if it’s a brand new car. Even on a brand new car, imperfections are always to be found, so it’s recommended to go through at least one solid pass of polishing and buffing before applying the ceramic coat.
Does wax hurt ceramic coating?
Just to set the record straight, yes, you can apply car wax to a ceramic coated surface. Sure, they have some hydrophobic water repelling attributes, but the hardness levels of most synthetic waxes are crap compared to a 9H-rated nano ceramic coating.
Is ceramic wax bad for your car?
While it’s a good idea, they simply don’t amplify existing damage on a vehicle’s paintwork like a spray coating or nano coating will. They are also a bit easier to maintain – as you can take your car to the local car wash or use a waterless wash to keep it clean.
Can you use mothers CMX over wax?
Yes. CMX Ceramic Spray Coating can be used as a stand-alone ceramic coating, or as a booster over existing ceramic coatings or waxes.
What to use to wipe down before painting?
While there is no best way to clean walls before painting, most walls can be washed using a sponge and warm water. For surfaces that have exposure to oil or grime, like kitchen walls, wash with a solution of water and grease-cutting detergent and follow up with clean water to remove any residual cleaning agent.
What should I clean my surface with before painting?
Clean the surface using ordinary household detergent or mineral spirits. Remove loose paint or rust with a wire brush, sandpaper or steel wool. Sand glossy surfaces with fine grain sandpaper and wipe with a tack cloth.
What is the best paint prep solvent?
3M Prep Solvent-70 effectively removes oils, wax, grease, and silicone from surfaces prior to coating. Use this water-based solvent to clean metal, primed metal and painted surfaces prior to the application of primer and paint.
Is an IPA wipe down necessary?
There are actually a couple of reasons for the IPA wipedown. The first would be for stripping the surface from any remaining waxes, sealants, or polishing residue. If you want to make sure that any previous wax or sealant layers are stripped from the surface, then do an IPA wipedown to remove them.
What does IPA mean in detailing?
The “IPA” is traditionally a mix of 50% Isopropyl Alcohol and 50% water. This inexpensive and easy to make detailing wonder of a product, is primarily used to prep the car after polishing to remove the oils left behind from the polish and it sets up the surface before waxing.
What does IPA stand for?
India pale ale.
Why ceramic coating is bad?
Ceramic coatings can’t damage your paint, regardless of what you do. However, improper application can leave streaks, high spots, hazing, and horrible reflections. So you’d better know what you’re doing, because once this thing sets, it cements over your paint for the next couple of years.
Can you mess up ceramic coating?
Yes, it is possible to mess up a DIY ceramic coating application. Improper application may cause high spots, streaks, cloudy reflections or hazing. A lot of vehicle owners may not be able to tell if they’ve sanded off enough of the cured ceramic coating, which is what makes this procedure so risky for DIYers.
Does Polish remove ceramic coating?
Since the ceramic coating is a physical layer, polishing is the only surefire way to remove it 100% and expose the clear coat underneath. In fact, many of the high-grade professional ceramic coatings claim the only way to remove them is through machine polishing. Just be careful to not eat into the clear coat.
Do I need to polish before sealant?
Sealing before polishing would be pointless. You always do paint correction before you apply wax or a sealant. Sealants are meant to stick to naked paint.
Do you wax before Polish?
Polish should be used before wax, as it helps to restore auto paint that has lost its shine due to oxidation. Car polish does this by removing a very fine layer of the paintwork so the appearance of scratches is minimized as they settle into the coat. Car polishes vary in terms of their levels of abrasiveness.
