Table of Contents
Are the flames supposed to touch gas logs?
The flames don’t actually touch the logs, which means you are just burning gas, which tends to result in more blue flames showing up with the yellow.
How do you arrange ceramic logs in a gas fireplace?
How to Arrange Gas Logs Place the largest ceramic logs on the bottom to serve as the foundation for the fire. Leave 2 inches (5 centimeters) between logs. Make sure none of the logs is blocking the gas flow. Arrange smaller logs on top of the foundation logs.
What should the flame on gas logs look like?
A healthy gas flame will burn steadily with a yellow or orange. Natural gas fireplace fireplaces, however, are designed to operate with a yellow or orange flame in order to achieve a more realistic appearance.
How do you use ceramic logs?
These logs can be placed in many different types of fireplace spaces. The pipes pump invisible gas through holes in the logs. When the gas logs are ignited, the ceramic logs will produce a steady flame. As propane or natural gas is pumped through the pipes, it burns harmlessly on the surface of the ceramic logs.
What color should the flame be on a ventless fireplace?
Vent-free fireplaces provide heat by burning natural gas or propane rather than wood. The flames in a vent-free fireplace should burn blue, although the flames may occasionally burn orange if dirt or other particles get inside the heater and burn. However, flames should not burn yellow.
How do I arrange my gas fire coals?
‘The coals must not be crammed together, or inserted into the holes in the matrix. A well laid out, generously spaced coal layout will give the best results. When lit the flames should not be hitting the sides of the firebox, if so adjust as necessary. No coals should be directly above a flame port.
How do you stack decorative logs on a fireplace?
To stack wood in a fireplace: Arrange the kindling in a crisscross formation so that the bits of wood are laid on top of each other while also allowing plenty of space between the bits of wood for airflow. Lay logs in a fireplace overlapping each other.
Should the flame be blue on a gas fire?
A natural gas flame should be blue. Not having a natural gas blue flame color or an LPG (propane) blue flame color, and having yellow or red flames instead, could be indicative of an appliance problem.
Should a gas flame be blue or yellow?
Gas flames should be blue but can sometimes burn red or yellow.
Why is my gas flame orange and not blue?
If you see orange flames instead of blue flames, the burners may need cleaning or adjusting. The orange color alerts you to your gas stove’s improper combustion, which may emit unsafe levels of carbon monoxide gas.
What is the purpose of ceramic logs?
Refractory ceramic gas logs are made of a mixture of cement and ceramic, which allows them to give off more heat than other types. They tend to last longer and are more durable than other options thanks to their ability to withstand very high temperatures. They can be used in both vented and ventless fireplaces.
Can you burn ceramic logs?
Ceramic fiber logs are better at resisting flame damage and some glow when heated. But they do break down with age, and they don’t look quite as realistic. You can buy vented logs for gas fires and burn those in any fireplace that’s designed to burn wood, as long as it has a gas line.
Do ceramic logs need to be replaced?
A: In the average home, a well-maintained vented log set with ceramic logs will last 10 or more years. A well-maintained vent-free log set with ceramic logs can also last a long time, but, if heavily used, will begin to wear in 3-5 years.
What Colour flame is carbon monoxide?
Burners producing EXTREMELY high concentrations of carbon monoxide can burn blue. Conversely, burners producing little carbon monoxide can burn yellow. Carbon monoxide is a colorless, odorless, tasteless, non-irritating and highly poisonous gas at low concentrations.
Does a blue flame mean carbon monoxide?
A blue flame from your furnace or gas stove indicates complete combustion of the gas. Besides wasted gas, higher energy bills, and more soot, the main danger of improper combustion is the increased amount of carbon monoxide (CO) produced by the combustion process.
How do you fix a yellow flame on a gas fireplace?
Gas burners burn blue if the ratio of fuel to air is correct. A yellow burner flame is a symptom that the burner is not getting enough air for complete combustion of the gas. Correcting this problem involves adjusting the burner’s air shutter to admit more air, something that an experienced do-it-yourselfer can do.
How do you adjust the airflow on a gas fireplace?
Insert a flat-blade screwdriver into the setscrew on the right side of the valve and twist counterclockwise to increase the gas-to-air ratio. Turn the setscrew clockwise to reduce air flow mixing with gas. Ask a friend to describe the flame color and intensity in your Heat-n-Glo fireplace to help with your adjustments.
How do you adjust the regulator on a gas fireplace?
Adjusting Gas Pressure If the pressure readings aren’t ideal, you need to turn the regulator by 90 degree turns using your flat head screwdriver. Turn it clockwise to increase pressure and counterclockwise to decrease pressure.
How do you adjust the flame color on a gas fireplace?
By opening the damper to the fireplace, you are allowing proper ventilation. This will control the color of the flame. To adjust it so that the flames have an orange or yellow tip to them, lower the air input. You can do this by changing the damper or by closing the air shutter.
How do you place rocks in a gas fireplace?
To place the rock wool, grab some tongs and carefully pull small pieces out of the bucket and onto your vermiculite. Your gas logs will lay on your burner pan, so make sure to have the rock wool almost hanging off the edges. This will ensure you can see more “coals” when your fire is burning.
Can I change the coals on my gas fire?
Well surprisingly yes. On some gas fires, you can indeed change the fuel bed effect. The new Icona hole in the wall fires has a variety of different effects including fuel beds, logs, driftwood, coals and pebbles.
Do you need to replace gas fire coals?
Sometimes it’s necessary to change gas fire coals, ceramic logs or pebbles as they become discoloured or worn. Gas fire manufacturers will normally insist on their specific brand of coals to be used on their gas fires claiming it is unsafe or reduces the heat efficiency of the fire.
