Table of Contents
Do you need sand in a fireplace?
The silica sand is used to help distribute the gas evenly throughout the burner pan. You will need this if you have a natural gas fireplace.
How do you install a ceramic log fireplace?
How to Arrange Gas Logs Place the largest ceramic logs on the bottom to serve as the foundation for the fire. Leave 2 inches (5 centimeters) between logs. Make sure none of the logs is blocking the gas flow. Arrange smaller logs on top of the foundation logs.
Can I use gas fireplace without sand?
You should definitely keep the doors open or the controls will overheat.and other possible problems. The burner is probably designed to have the sand in it. However, it might be that your burner ports become clogged with moisture or soot/rust.
Can I use ceramic logs in my fireplace?
Refractory ceramic gas logs are made of a mixture of cement and ceramic, which allows them to give off more heat than other types. They tend to last longer and are more durable than other options thanks to their ability to withstand very high temperatures. They can be used in both vented and ventless fireplaces.
Why is there sand in my chimney?
There are mortar joints in the middle of the bricks and they often become sand. More so, the brickwork is normally susceptible and predisposed to soot deposits hence consequently causing tiny portions or segments to fall off. People rarely repoint the inner walls of the chimney because it is quite inaccessible.
What do you put in a gas fireplace?
Must-Have Accessories For Gas Logs Gas Log Embers. Embers are the fuzzy clumps included with your gas logs that react to the flame and create the glowing effect under the logs of a wood burning fire. Gas Log Lava Rock. Shop All Gas Log Branches. Fire Glass. Gas Log Pine Cones. Gas Log Acorns. Soot Remover. All Firebacks.
How do you install a fireplace log?
Take two of the biggest logs and place them parallel with the back of the fireplace on top of the grate. Leave space between them for the flames to reach up over the logs. Take some of the smaller logs and place them perpendicular on top of the bigger logs. Place the kindling on top of the smaller logs in a loose pile.
How do you install fireplace logs?
How to Light a Fireplace: The “Log Cabin” Method Place two thin logs with no bark parallel to the back of the fireplace, about six inches apart from one another. Heap kindling—whether newspapers, twigs, or both—between the two logs from the previous step. Position two additional logs perpendicular to the first two.
How do ceramic fireplace logs work?
These logs can be placed in many different types of fireplace spaces. The pipes pump invisible gas through holes in the logs. When the gas logs are ignited, the ceramic logs will produce a steady flame. As propane or natural gas is pumped through the pipes, it burns harmlessly on the surface of the ceramic logs.
Do I need vermiculite in my gas fireplace?
Vermiculite is mostly used for Propane (LP) gas logs. It is poured into the burner pan to aid the heavier LP gas to spread across the burner more effectively.
What is the fluffy stuff in my gas fireplace?
That looks like rockwool. It glows when it’s engulfed in the gas burner flames to represent glowing embers. There is a sand base in the burner to diffuse the gas if you’re burning NG. With LP gas that base material is usually vermiculite.
How do you put sand in a gas fireplace?
How to Install Gas Logs Turn off the gas connection to your fireplace. Distribute an even supply of sand across the burner pan. Cover the sand with rock wool and vermiculite. Place the grate over the burner pan. Attach the artificial logs to the burner pan. Turn your gas line connection back on.
How long do ceramic fireplace logs last?
A: In the average home, a well-maintained vented log set with ceramic logs will last 10 or more years. A well-maintained vent-free log set with ceramic logs can also last a long time, but, if heavily used, will begin to wear in 3-5 years.
How do you clean ceramic fireplace logs?
Here is a step-by-step guide on how to clean and inspect your gas logs: Step 1: Make Sure Gas is Turned Off. Step 2: Disassemble the Fireplace. Step 3: Inspect and Brush. Step 4: Vacuum Away Dust and Cobwebs. Step 5: Polish Glass and Metal. Step 6: Wipe Down Mantle and Hearth. Step 7: Reassemble the Gas Fireplace.
Why are my ceramic logs turning black?
The most common causes of soot buildup in a gas fireplace are ceramic fire-logs that have been moved out of proper position and burner ports that are clogged. The other main cause of soot is clogged ports on the gas burner, which causes an incomplete or unbalanced burn and formation of soot on the logs and doors.
What is falling down my chimney?
This is when the air outside is warmer than the air inside the house – the complete opposite of what happens in winter. So this can mean air flowing down the chimney from outside into the room, rather than up the chimney, and bringing down soot and mortar.
Is it normal for stuff to fall down chimney?
It is very common for bits to fall down a chimney. This is most common if you have a gas fire, an electric fire or don’t use your fireplace at all. Chimneys are often lined with what’s called ‘pargeting’. If you don’t use a fire or have a type of fire that doesn’t make a lot of soot, the pargeting will crumble.
