Table of Contents
How do you replace a ceramic spindle?
Do ceramic spindles need washers?
Absolutely not. In fact, the vast majority of bathroom taps these days are created using ceramic disc cartridges. Only very few, usually traditionally-styled, taps still use those dastardly compression washers that bring a shiver to our spinesJun 18, 2013.
How does a ceramic disc spindle work?
Ceramic cartridge spindle helps you to turn a tap off with just a quarter turn. So, one disc is always fixed in the place while the other one moves with the tap handle. When they both align, your water is allowed to flow. If they aren’t aligned, the water stays put.
How do you install ceramic cartridges?
Locate the locating pins on the bottom of the cartridge and locate the corresponding holes in the faucet body. Insert the cartridge and rotate it until it slides down into place.How Do I Install A Ceramic Disc Cartridge For A Single Handle Faucet? Remove the old cartridge. Install the new cartridge. Test for leaks.
Do ceramic cartridges have washers?
Nowadays, the vast majority of modern bathroom taps use ceramic disc cartridges instead of rubber washers. In simple terms, this means no (or at least far fewer) leaks, and only a 90-degree rotation to turn the tap on or off.
Are ceramic tap spindles better?
The reason many opt for ceramic disc spindles is because: They are more durable and longer wearing, saving the inconvenience and expense at having to replace washers. Less wear and tear on the tap as there is no constant turning to get a good flow of water.
How does a tap spindle work?
How a water tap works. The flow of water is controlled by turning or moving the tap handle which is connected to the spindle. When moved, the spindle causes the tap valve to move upwards or downwards, causing the water chamber to open or close.
Why is my ceramic disc tap leaking?
Ceramic disc taps feature a cartridge within the tap that contain a pair of ceramic discs. If you do experience dripping this is usually caused by a scratched ceramic disc. In order to rectify the leak you must replace the entire cartridge as follows.
How does a ceramic phono cartridge work?
When the stylus of the cartridge plays the record, the stylus is made to move back and forth by these squiggles in the grooves. As the stylus moves, it causes the cartridge to generate an electrical signal that is sent out the turntable, which is then fed into the amplifier of the music system.
Can you convert taps to ceramic?
Answer. Yes, it is straight forward to change a ceramic cartridge and full fitting instructions will be provided with your purchase.
How do you remove wall spindles?
Normally spindles are just toenailed in so you can pull them out with a little effort. Ours were pretty easy to get out. Use wood putty, drywall compound or spackle and a sanding block to smooth out all the surfaces: You’ll want to fill in any holes in the wood ledge with wood putty.
Are all tap spindles the same?
There are only two types of spindle tapware. You have one which has tap washers and the other which has a ceramic disc (known as quarter turn taps). If you have a leaking spindle tap, it is usually a fairly easy job to rectify.
What are ceramic washers?
In stock fully dense Alumina Oxide and Zirconia Oxide ceramic washers is the most widely used advanced ceramic material. It offers very good performance in terms of wear resistance, corrosion resistance and strength at a reasonable price. Its high dielectric properties are beneficial in electronic products.
Do modern mixer taps have washers?
Some modern mixer taps (including monobloc taps) operate with ceramic discs instead of rubber washers, which are hidden inside cartridges within the tap. There is one cartridge for hot water and another for cold water.
Do some taps not have washers?
Washers for most taps above come in standard sizes. However, some modern taps do without washers altogether or may have different seals. See below for more on washerless taps. You may find an isolation valve on the pipe below the tap you need to work on.
Are ceramic tap valves better?
Plumbing connections for ceramic disc are no different to other taps, and with that comes all the ease of a quarter-turn technology, and a more durable, longer lasting tap without those annoying leaks. From a long-term maintenance point of view, ceramic disc taps are much better than normal taps.
How long do ceramic tap washers last?
Ceramic tap washers can last years, but other types can last for as little as twelve months depending on how frequently they’re used.
How long do tap spindles last?
‘ Tap washers can last a long time, but sometimes they can only last 12 months or less. You know your tap washers need replacing when the taps are turned off and the faucet still drips. Or if the water won’t turn off – which is a sign that the tap washer has been completely stripped and no longer seals on the tap seat.
Why does my tap drip after I turn it off?
The faucet valve (working parts) is housed in the handle and controls the on/off, volume, and temperature control. Over time, a faucet valve can lose its ability to make a water-tight seal, so water will drip out even in the off position.
