Table of Contents
Can you put a toilet flange over tile?
Yes, the toilet flange should be seated over the tile so that it can be secured tightly through the bolts. The usual method followed is to place the flange on the tile and its bottom is touching the tile. You then fix the flange with the screws ensuring they go below the thickness of the tile.
Should toilet flange be flush with tile floor?
The bottom of the flange must be flush with the tile, no gaps, or it could end up too high. You don’t want a large wax depth from having it too low and if it is too high, the toilet will rock. The seal is engineered to work best with the flange on top of the finished floor.
Do you have to raise toilet flange after tiling?
Even 1/4-inch-thick tile over a layer of thin-set adhesive can leave the toilet flange far enough below finished floor level to make it difficult to get a good seal. A better solution is to raise the height of the flange. Measure the distance from the top of the toilet flange to the top of the finished tile floor.
How do you secure a toilet to a tile floor?
To keep your toilet anchored securely, always use a closet flange secured tightly to the floor. The closet flange connects the waste pipe to the underside of your toilet bowl. It helps seal the two areas together so gases cannot escape and prevents the toilet from rocking or moving away from the pipe.
Is it better to tile under or around a toilet?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first. The floor will be sealed a lot better with the tiles being laid under the toilet. 2. It is also easier to do this rather than trying to cut tiles around the toilet.
How close should tile be to toilet flange?
When you’re tiling around an already-installed toilet, plan out your pattern so that at there is at least 2 in (5.1 cm) of space between the base of the toilet and the edges of any of the tiles you’ll be laying around it.
Does toilet flange have to be level with floor?
When you install your toilet flange, it should be installed on top of the finished floor, and it should also be installed perfectly level. If your flange sits even or below the floor, then it’s wrong. It has to sit evenly on top of the finished floor. As a result, the toilet may wobble or leak at the base.
How far above tile should toilet flange be?
Check the Flange Height The optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal.
Can toilet flange be lower than floor?
In a typical toilet installation, the floor flange that sits inside the drain opening below the toilet should be positioned so that its bottom surface rests flush against the finished floor or no more than 1/4 inch above or below the floor.
Can I just silicone a toilet to the floor?
Turns out, caulking your toilet to the floor is actually smart. These clients say that caulking around the base of the toilet would trap water from a leaking toilet, causing damage below and around the toilet since it has no place to leak onto the floor.
Do you have to glue a toilet flange?
If the pipe has a 4-inch inside diameter: This toilet flange is designed to glue on the inside of the pipe or expand inside the pipe. Leave the old toilet flange right in place and glue on the new one at the right elevation for the floor, if it’s plastic.
Can you use Tapcons in tile?
They don’t work on porcelain tiles, too hard. Tried masonry bits too. Basically that’s what Tapcon bits are, no go either.
Do you tile before installing toilet?
After you lay ceramic floor tiles, the grout inside the joints between the individual tiles must be allowed to cure. Generally, it’s safest to wait at least 48 but ideally 72 hours after installing ceramic tiles before installing a toilet.
Is it okay to tile around a toilet?
Tiling around a toilet to save a few dollars in labor will leave you with an unprofessional installation, and your guests will notice. It is almost impossible to cut flooring, especially ceramic tile or wood, precise enough to fit snugly around a toilet base.
Do you put flooring down before toilet?
If you’re installing a new floor, pedestal sink, and toilet, you should install the laminate flooring first so it’s under the sink and toilet. By installing the flooring first, you will also be able to more easily switch up cabinetry or fixtures, without having gaps in the flooring.
What happens if toilet flange is too high?
When your toilet flange is too high, your toilet may leak water and rock back and forth when used. Both the leaking and the rocking can warp or break the floor. A leaking flange can also rot the subfloor and lead to the accumulation of mildew and mold.
Does a toilet need to be level?
2 Answers. There are purists out there that may say it must be level, but if it looks good setting there, I would let it set on the floor with no shims. It should not affect the operation of the flapper or valve that flushes the toilet.
