Table of Contents
How do you cut backsplash tiles already on the wall?
Cut through the tile using an angle grinder. Start at one end of the cut line and run the blade along the tile surface to the other end. Spray water onto the tile when needed to keep the surface wet. Make multiple passes with the blade if needed, to cut through the tile and to the subsurface.
How do you cut a backsplash that is already installed?
Turn the angle grinder so the blade will meet the tile perpendicularly. Turn on the grinder and push the blade straight down into the tile and its backing. Once you have cut through, you can pull the blade back for a short cut, or push the blade away from you to continue cutting through the tile for longer cuts.
How do you do corners with smart tiles?
Smart Tiles are flexible enough to apply on rounded or angled surfaces. However, if you are applying the tile on a concave corner, simply cut Smart Tiles and join the tile at the corner. This way, you do not apply any unnecessary pressure to the Gel-O. Watch this video for a demo.
How do you hide an outlet in a backsplash?
Low and Horizontal Outlet Strips If you have countertop space without an upper-cabinet above it, consider placing outlets a little lower than normal, and horizontally, along the very start of your backsplash tile. This placement, combined with well-matched cover plates, will also help your outlets to disappear.
Should outlets match backsplash?
To keep costs down, go with standard outlets and switches that most match the color of your backsplash. You can also go for higher end devices with more color options for even better color matches. Lower the height and turn horizontally to disguise outlets and switches easily behind kitchen items or decor.
How can I hide my kitchen sockets?
Covering Plug Sockets. Conceal the socket with a plant. Place a large houseplant in front of a plug socket located near the floor, or a large, opaque vase in front of a socket on a table or kitchen worktop. Store kitchen equipment in front of a kitchen socket.
Can I cut tiles with a multi tool?
For some DIYers, an oscillating tool is among the best tools for cutting tile. An oscillating multitool can replace a tile nipper (since it also works by cutting the tile edges to shape it) but cannot replace a manual tile cutter or a wet tile saw and other tile cutting tools.
What are tile spacers?
Tile spacers allow you to achieve a consistent pattern when fixing wall/floor tiles and help to ensure that all tiles are laid equidistant from each other (providing a symmetrical finish – as you or your customer would expect) in order for the grout to then be applied.
How do you finish a corner backsplash?
Stop in an Inside Corner If your kitchen countertop butts up against a side wall, you’ve got an inside corner. Let your backsplash follow the countertop all the way to the corner and stop there. Don’t be tempted to keep going to partially cover the side wall. If you don’t have an inside corner, keep reading!Apr 27, 2021.
What do you use to cut backsplash tile?
Cut tile sheets to the nearest full row to fit around outlets, then fill the gaps with tiles cut on a wet saw. If you’re lucky, you can fit the tile sheets under upper cabinets and around outlets by cutting the mesh backing with a utility knife. If not, you’ll have to cut the tile with a wet saw.
How can I hide an outlet plug?
Covering Outlets. Position furniture in front of the outlet. Cover the outlet with a piece of furniture to hide it from view if you don’t plan on use it. If you need to temporarily use the outlet, you can always rearrange the furniture or thread the cord underneath the furniture.
Should switch plates and outlet covers match?
Ideally they should match the wall, or at least not stick out like the proverbial sore thumb. You can usually paint the switch plates to match the wall. Lightly sanding the plate first will help the paint adhere.
Should outlets match walls?
Simply painting the outlet cover the same color as the wall is your best bet if you want a true match. Architectural Digest suggests painting outlet covers the same color and finish as the trim in a room for a subtle, textural effect.
What color outlets should I use?
White switches continue to be the most popular finish, and they’re the easiest to match plates to. You’ll find the greatest range of electrical switches, outlets, dimmers, motion devices, sound systems, & home security controls in white.
Can you put sockets in kitchen cupboards?
Yes, provided that they are securely fixed to rigid parts of the units that are not demountable or otherwise liable to be disturbed in normal service.
How do you hide outlets on kitchen island?
Options for Hiding Kitchen Outlets Choose Pop Up Outlets. Pop-up outlets are installed directly into a countertop or surface, most commonly on the kitchen island where there is no wall nearby. Cover Them Up. Choose Electrical Plates Accordingly.
What causes tile to chip when cutting?
If a tile chips, it is generally not a manufacturing fault but is the cause of one of the following accidents against the tile itself: Dropping a heavy or hard object onto the ceramic or porcelain tile. This may cause the surface to crack or chip.
Do you cut ceramic tile face up or down?
Regardless of the kind of tile you’re cutting, the best method is to cut with the front of the tile facing up. The front is the side that will be exposed once you lay the tile. This method ensures the smoothest finished edge on the tile with the least amount of chipping.
