Table of Contents
The below recommendations are based on using CeramicSpeed All Round blue grease. CeramicSpeed bottom bracket and wheel bearings should be maintained every 5,000-8,000 km or 3,000-5,000 miles.
How often should you grease bottom bracket?
Best practice 1-2 years depending on use and grease quality. If you’re cycling in a lot of rain or off-road 3-9 months is a better bet. If it’s a cheap bb and you don’t care about failure then let it eat so long as it’s adjusted and running smooth.
Do I need to lubricate ceramic bearings?
No, full ceramic bearings can be run completely dry. They do not need lubrication to run. Ceramic is non-porous, unlike steel, as a result it is virtually frictionless. Because there is no heat buildup and virtually no friction, full ceramic bearings can be run completely dry.
How do you take care of ceramic bearings?
Full ceramic bearings are maintenance free. However, they can be washed using regular tap water or a standard bearing cleaner product if required. Make sure the bearing is completely dry before replacing it. These bearings do not need lubricant to operate, so there is no need to add an oil or grease at this stage.
Should I grease my bottom bracket?
new grease won’t cure worn out bearings and races. so, to answer the original question, no, you don’t need to lube the bottom bracket.
Should you grease bottom bracket threads?
With the threads now clean and sharp the next step is to prepare them with a layer of good quality grease. The grease will enable a smooth fit between the cups and the frame, the grease will also reduce the chance of corrosion developing between the materials in the bottom bracket shell and those in the cups.
What oil do you use on ceramic bearings?
For XD-15, ceramic zero, ceramic hybrid, and stainless steel bearings we use Kluber NBU52. This grease only runs better and smoother with time and is highly resistant to being washed out. It is engineered to stick to the balls and continually be pulled back into the ball path where it is needed.
Do ceramic bearings have a break in period?
Like has been said, bearings shouldn’t “break-in” (wear down) for at least a few years on good hubs. This holds true for steel and ceramic. Use grease, not oil, unless you have a staff bike tech who will be doing weekly wheel maintenance for you.
Do ceramic bearings last longer?
First, ceramic bearings have lower friction while spinning at high RPM. Second, well-made, high-quality ceramic bearings can have a significantly longer lifespan than the commonly used stock steel bearings that come installed on most production bikes. This is due to the hardness of the bearings.
How long do CeramicSpeed bottom brackets last?
CeramicSpeed bottom bracket and wheel bearings should be maintained every 5,000-8,000 km or 3,000-5,000 miles. CeramicSpeed headset bearings can be maintained once per year for most riders.
How long do ceramic bottom brackets last?
Simple rule is (unless you’re starting a long trip) “if it ain’t broke don’t fix it”. Do normal maintenance, keep things properly lubed and your BB should last for another 4,000 miles or more.
What is Ceramic Grease?
Ceramic Grease is a durable, high-quality ceramic grease. It has been specially developed for applications requiring high pressure and temperature resistance. Ceramic Grease is free of silicones and metal, as a result of which the product meets the environmental regulations on the use of heavy metals.
Should I clean my ceramic bearings?
You should clean the bearings and the ball retainers. To do so, soak them first and foremost in a de-greasing solution such as acetone or pure alcohol. Leave it overnight to ensure that all the grease have been removed completely. This is the only sign that the bearings are thoroughly cleaned.
Can you use normal grease on ceramic bearings?
There is absolutely nothing magic about ceramic bearings, including what lube you choose to use. Any grease will work just fine. For minimum rolling resistance, lighter weight greases are better.
Can ceramic bearings get wet?
Are Ceramic Bearings Waterproof? Nope. Although the ceramic balls will not be affected by rust, the steel casings of each bearing are still vulnerable to the elements.
Should you grease crank spindle?
So for our René Herse cranks, we recommend that you lightly grease the crank spindle. Crank bolts can loosen over time, but that does not mean that you should re-tighten them. Instead, remove your cranks every couple of years and inspect them for cracks. (You should do this with all cranks, no matter the brand.)Apr 16, 2012.
Can I use lithium grease on bottom bracket?
Lithium grease is fine, you can’t tell about the drag once you are riding. Water proof is a plus big time. I think the campy one is lithium too. Something is wrong with yor bottom bracket.
What grease do I use for bottom bracket?
For the bottom bracket and most bicycle components , generally it is just a multi-purpose bicycle grease, on bottom brackets anti-seize should be used if it is a titanium frame or mismatched metal that are known to seize or bond to one another, but can be used in other frames as well.
Can I use anti-seize on bottom bracket?
Park Tool Anti-Seize Compound reduces friction in threaded and press fit connections for easy assembly and disassembly. Ideal for bottom bracket and pedal threads, pressed headset cups, seat posts, quill stems, etc.
Is Lithium grease better than regular grease?
Lithium-complex greases generally possess good stability, high-temperature characteristics and water-resistance properties. The dropping point and high-temperature life of calcium-sulfonate greases are also better, allowing these greases to be used at higher temperatures.
Is silicone oil good for bearings?
Silicone oil isn’t good for bearings. Silicone is not really a lubricant, it’s more for use as a moisture repellent. If you’re talking about a 1/8th car, it’s best to use light grease. It bleeds out of the bearing slowly so dirt doesn’t work it’s way into the bearing as easily and lasts way longer than any oil.
What is a disadvantage of ceramic bearings?
Ceramic bearings have lower load capacities in comparison to metals and are sensitive to thermal shock. Thermal shock is when the temperature gradient within the material causes a differential expansion, which results in an internal stress. This stress can exceed the strength of the material thus forming a crack.
Are ceramic bearings worth it?
Faster, lighter, and more durable? According to research, a well-made ceramic bearing will roll faster, saving you energy and allowing faster cruising speeds compared to an equivalent steel bearing. This is because the properties of ceramic allow the creation of rounder, smoother bearings.
