Table of Contents
How high can toilet flange be above tile?
The optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal. If you recently tiled or changed the bathroom flooring, the flange height is likely less than optimal.
Can toilet flange sit on top of tile?
Yes, the toilet flange should be seated over the tile so that it can be secured tightly through the bolts. The usual method followed is to place the flange on the tile and its bottom is touching the tile. You then fix the flange with the screws ensuring they go below the thickness of the tile.
Can a toilet flange be too high?
When your toilet flange is too high, your toilet may leak water and rock back and forth when used. Both the leaking and the rocking can warp or break the floor. A leaking flange can also rot the subfloor and lead to the accumulation of mildew and mold.
Should the toilet flange be flush with tile?
The bottom of the flange must be flush with the tile, no gaps, or it could end up too high. You don’t want a large wax depth from having it too low and if it is too high, the toilet will rock. The seal is engineered to work best with the flange on top of the finished floor.
Can toilet flange go above floor 1 2?
The height to aim for is 1/2 inch above the floor. This allows almost any type of wax ring to be used, and still ensure a good seal.
Does the toilet flange have to be level with the floor?
When you install your toilet flange, it should be installed on top of the finished floor, and it should also be installed perfectly level. If your flange sits even or below the floor, then it’s wrong. It has to sit evenly on top of the finished floor. As a result, the toilet may wobble or leak at the base.
Should I tile around or under toilet?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first.
Where should a toilet flange sit?
In a typical toilet installation, the floor flange that sits inside the drain opening below the toilet should be positioned so that its bottom surface rests flush against the finished floor or no more than 1/4 inch above or below the floor.
How far should a toilet flange be from the wall?
The Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall.
Can a toilet flange be too low?
Low toilet flange is a common problem when installing a new (or in my case thicker mortar base). Unless your toilet is properly mated and sealed to the waste pipe, you may face problems related to sewer gas odor (it’s very unhealthy and unpleasant) and/or fluid leaks.
How do I fill the gap between my toilet and floor?
Apply a thin, even bead of caulk around the base of the toilet to cover the gap along the floor and hide the shims. If necessary, smooth the caulk with your finger, wiping your finger clean frequently with a paper towel or a rag.
Does a toilet need to be level?
2 Answers. There are purists out there that may say it must be level, but if it looks good setting there, I would let it set on the floor with no shims. It should not affect the operation of the flapper or valve that flushes the toilet.
Do toilet flange extenders work?
If the CI is in good shape, and the length of the horn on the flange is long enough, it might work. But, keep in mind that the thing that holds the toilet in place is the strength of the flange. Most plumbers do not like an all plastic flange – it’s too easy to crack it, then the toilet is free to move around.
How do you secure a toilet to a tile floor?
To keep your toilet anchored securely, always use a closet flange secured tightly to the floor. The closet flange connects the waste pipe to the underside of your toilet bowl. It helps seal the two areas together so gases cannot escape and prevents the toilet from rocking or moving away from the pipe.
Do you have to glue a toilet flange?
If the pipe has a 4-inch inside diameter: This toilet flange is designed to glue on the inside of the pipe or expand inside the pipe. Leave the old toilet flange right in place and glue on the new one at the right elevation for the floor, if it’s plastic.
Do you put flooring down before toilet?
If you’re installing a new floor, pedestal sink, and toilet, you should install the laminate flooring first so it’s under the sink and toilet. By installing the flooring first, you will also be able to more easily switch up cabinetry or fixtures, without having gaps in the flooring.
Do you tile walls before or after fitting a bathroom?
Why You Should Tile the Floor First The tile installation principle is that the tiled wall ‘hangs’ over the tiled floor. The best way to achieve this outcome is by first tiling the floor so that the wall tile will then seem to be ‘sitting’ on the bathroom floor.
