Table of Contents
Coagulation and flocculation are used to separate the suspended solids portion from the water. Therefore, suspended solids will remain in suspension and will not clump together and settle out of the water, unless proper coagulation and flocculation is used.
What is the ultimate goal of coagulation and flocculation?
Terms in this set (50) What is the purpose of coagulation and flocculation? The purpose of coagulation and flocculation is to remove particulate impurities and color from the water being treated.
Why is coagulation-flocculation important to other treatment processes?
This repulsion prevents the particles from agglomerating, causing them to remain in suspension. Coagulation-Flocculation is also a common process to treat industrial and domestic wastewater in order to remove suspended particles from the water.
Is gypsum a flocculant?
Gypsum can coagulate or bridge clay particles, which accelerates settling. Flocculants should be used to prevent damage to sensitive water resources such as ponds, lakes and trout streams or whenever turbidity control is required. The best thing to do is a jar or bucket test using slightly varying rates of gypsum.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
Which gas is released when alum is added to water?
Explanation: Carbon dioxide gas is released when alum is added to water, which is corrosive to metals.
Does alum increase pH?
Ionic species present in alum solutions are highly dependent on the degree of reaction with hydroxyl ions. It is tempting to say that “the composition is pH-dependent.” However, in the vicinity of pH=4.3 the composition of alum solutions changes a great deal with very little change in pH.
What makes a good flocculant?
Polymers are useful as flocculants because they are robust molecules and sometimes carry charges. Because they are so large, small particles can get trapped in the curves of the polymer causing them to accumulate a mass heavy enough to prevent their retention in solution.
What is the relationship between flocculation and coagulation?
Coagulation: Particles that aggregate with themselves e.g. by the influence of a change in pH. Flocculation: Particles that aggregate by the use of polymers that binds them together. Coagulation and flocculation are well-known techniques within wastewater treatment.
What is the function of coagulant?
What are coagulants used for? In water treatment, coagulants are used to remove a wide variety of hazardous materials from water, ranging from organic matter and pathogens, to inorganics and toxic materials, like arsenic, chemical phosphorous and fluoride.
What happens during coagulation?
Blood clots and coagulation Blood vessels shrink so that less blood will leak out. Tiny cells in the blood called platelets stick together around the wound to patch the leak. Blood proteins and platelets come together and form what is known as a fibrin clot. The clot acts like a mesh to stop the bleeding.
What can be used as a flocculant?
The following natural products are used as flocculants: Chitosan. Isinglass. Moringa oleifera seeds (Horseradish Tree) Gelatin. Strychnos potatorum seeds (Nirmali nut tree) Guar gum. Alginates (brown seaweed extracts).
What are the similarities and differences between flocculation and coagulation?
Coagulation is a chemical process and flocculation is a physical process, In coagulation, the process involves the utilization of a coagulant that has the ability to destabilize the charged particles which are not settleable whilst flocculation involves a similar destabilization process that is achieved through Dec 10, 2017
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
Is coagulation reversible?
Coagulation is irreversible, the proteins cannot be turned back into their liquid form.
Why is it important to treat flocculation in water?
The coagulation-flocculation process itself removes only about 60%-70% of Natural Organic Matter (NOM) and thus, other processes like oxidation, filtration and sedimentation are necessary for complete raw water or wastewater treatment.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
Why is flocculation important?
Applying flocculation ensures a high flux over filtration units as well as efficient and cost effective separation of cell material from supernatant. Used water can contain significant amounts of suspended particulate matter, which often takes long to sediment.
What is the difference between flocculant and coagulant?
Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts. Generally speaking, anionic flocculants are used to catch mineral particles while cationic flocculants can capture organic particles.
What is difference between flocculation and Deflocculation?
The key difference between flocculation and deflocculation is that flocculation is the formation of flocs by the clumping of fine particles, whereas deflocculation is the dispersion of flocs to form a stable colloid. Flocculation refers to the formation of clumps from fine particles in a colloid.
Why is alum added to the water?
In a typical water treatment process: Alum is used to coagulate suspended particles, algae, protozoa, viruses, bacteria, and some metal ions (such as iron and manganese) into larger particles. Chlorine is added to kill bacteria that may have entered the water during the filtration process.
Why does pH affect coagulation?
At varying sample pH values, the coagulation process may suffer from less than optimum ions being formed in solution. The size of the coagulated particles is also affected by pH, which, in turn, determines the density of the flocculated slime and its tendency and rate of settling out.
What is the best coagulant?
Chemical Coagulants Used In Water Treatment Aluminum Sulfate (Alum) – One of the most commonly used water treatment chemicals in the world. Aluminum Chloride – A second choice to Alum as it is more expensive, hazardous and corrosive. Polyaluminum Chloride (PAC) & Aluminum Chlorohydrate (ACH).
What is the principle of flocculation?
Flocculation refers to the process used to bring the coagulated particles together so that they can combine to form larger, settleable, and filterable masses of particles called floc. Zeta potential is defined and its role in coagulation described.
What are the side effects of alum?
If experienced, these tend to have a Severe expression i fluid accumulation around the eye. throat swelling. a feeling of throat tightness. a skin ulcer. hives. a shallow ulcer on the skin. fainting. puffy face from water retention.
