Table of Contents
Coagulation is a chemical process. Flocculation is a physical process. Coagulants such as inorganic salts of aluminum or iron that neutralize the suspended particles are added during coagulation. Flocculant such as an organic polymer that involves in bridging and strengthening the flocs is added.
Is flocculant same as coagulant?
Flocculation is synonymous with agglomeration and coagulation / coalescence. Basically, coagulation is a process of addition of coagulant to destabilize a stabilized charged particle. Meanwhile, flocculation is a mixing technique that promotes agglomeration and assists in the settling of particles.
What is coagulant and flocculant?
Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts. Generally speaking, anionic flocculants are used to catch mineral particles while cationic flocculants can capture organic particles.
How can flocculation be prevented?
When particles of a suspension come close together they can form aggregates called flocculates which will settle more rapidly. To prevent that we often coat the particle with a charged surfactant. The charge (Zeta potential) acts to keep the particles separate and prevent flocculation.
How does a flocculant work?
A flocculant is a chemical that can be added to the water to help colloids and any other suspended solids bind together and form heavier particles. The heavier particles then settle to the bottom of the container/tank and the water on the top is drained off.
Is gypsum a flocculant?
Gypsum can coagulate or bridge clay particles, which accelerates settling. Flocculants should be used to prevent damage to sensitive water resources such as ponds, lakes and trout streams or whenever turbidity control is required. The best thing to do is a jar or bucket test using slightly varying rates of gypsum.
Can you add too much flocculant?
Too much floc can detract from the beauty of your pool. Flocculants are substances that help clear the cloudiness and restore the clarity to your swimming pool water. You can use too much floc, however.
Why are coagulation and flocculation is necessary?
Coagulation and flocculation are used to separate the suspended solids portion from the water. Suspended particles vary in source, charge, particle size, shape, and density. Coagulation and flocculation occurs in successive steps, allowing particle collision and growth of floc.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
What is Deflocculation of soil?
Definition. Flocculation – process during which particles, for example, of a soil, dispersed in a solution contact and adhere each another, forming clusters, flocks, flakes, or clumps of a larger size. The term originates from the word “floc,” which is the flake of precipitate that comes out of solution.
What can be used as a flocculant?
The following natural products are used as flocculants: Chitosan. Isinglass. Moringa oleifera seeds (Horseradish Tree) Gelatin. Strychnos potatorum seeds (Nirmali nut tree) Guar gum. Alginates (brown seaweed extracts).
What causes dispersion in soil?
When the ratio of sodium to other ions at these exchange sites is high, clay particles are less tightly bound to each other and the soil aggregates easily disperse when the soil becomes wet. When a dispersive soil wets, the structure of the soil collapses.
How flocculation and coagulation differ from each other?
Coagulation: Particles that aggregate with themselves e.g. by the influence of a change in pH. Flocculation: Particles that aggregate by the use of polymers that binds them together.
What is coagulant explain with example?
Coagulants are a substance which cause particles in a liquid to curdle and clot together. Coagulation treatment chemicals are used in effluent water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering.
How often can you use flocculant?
You can reuse a clarifier after 5-7 days, but if you’re constantly seeing cloudy water, there may be other problems. Adding too much flocculant can cause its own issues.
What makes a good coagulant?
The best coagulant is therefore a pre-hydrolysed species with a high basicity. PACl has been found to be very suitable for lime softening applications. The advantage of a low basicity coagulant is even more pronounced in full softening applications, and the non-sulphated PACl is the coagulant of choice.
What are natural coagulants?
They are mainly composed of polymers of natural origin extracted from plants, algae or animals. Among these are polysaccharides and water soluble substances that act as coagulation and / or flocculation agents.
What is an example of a flocculant?
Flocculation and coagulation treatment chemicals are used in effluent wastewater water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering. Examples of ChemTreat coagulation products include aluminum salts, iron salts, and polyelectrolytes.
What causes soil flocculation?
Soil particles will flocculate if the amount of soluble salts in the soil is increased (increased EC), even if there is a lot of sodium. Soil particles may disperse if the amount of soluble salts in the soil is decreased (i.e. if EC is decreased).
How the coagulant works in jar test?
The jar test involves exposing same volume samples of the water to be treated to different doses of the coagulant and then simultaneously mixing the samples at a constant rapid mixing time. The microfloc formed after coagulation further undergoes flocculation and is allowed to settle.
What is meant by flocculant?
A flocculant is a compound or agent which is added to a vessel to make particles stick together and form larger particles. Flocculants are added to encourage floc formation and enhance settling and compression rates. Flocculation involves the addition of a flocculant that causes the particles to stick together.
What is coagulant used for?
What are coagulants used for? In water treatment, coagulants are used to remove a wide variety of hazardous materials from water, ranging from organic matter and pathogens, to inorganics and toxic materials, like arsenic, chemical phosphorous and fluoride.
What is the most used coagulant?
Chemical Coagulants Used In Water Treatment Aluminum Sulfate (Alum) – One of the most commonly used water treatment chemicals in the world. Aluminum Chloride – A second choice to Alum as it is more expensive, hazardous and corrosive. Polyaluminum Chloride (PAC) & Aluminum Chlorohydrate (ACH).
What is most common used coagulant?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
