Table of Contents
Use an Angle Grinder The most common method for cutting porcelain and ceramic tiles is to use a wet saw, which is a small table saw with a diamond cutting wheel and a trough of water through which the blade passes to keep it cool.
How do you cut porcelain?
Place the blade on the tile edge closest to you. Press the lever down and then roll the blade to the other end of the cutter. One final push down will ensure that the cut goes through to the end of the tile. The key to cutting porcelain tile without chipping it is not to use too much force.
Can you grind a porcelain toilet?
Porcelain toilets don’t call for cutting. The versatile angle grinder will serve you well if you need to cut through a porcelain john. Before tackling the unwieldy shape of a toilet, you should make cuts on scrap porcelain.
What is the best blade for cutting porcelain?
The best option for cutting porcelain tiles are diamond blades. They are made of steel with a diamond coating, making them very tough, durable and perfect for precise cutting. Blades for cutting porcelain tiles can also be used with other materials, such as concrete, granite or wall panels.
Is porcelain tile hard to cut?
When working with both materials, ceramic tiles are far easier to cut than porcelain. Particularly within areas that require a lot of cutting and specific cuts in order to install your tiles neatly, porcelain is much harder to cut and often will require a more professional cutter to cut to the same effect.
Do you need to remove toilet to tile floor?
While it is possible to install a new linoleum or ceramic tile floor without removing the toilet, it is not recommended and actually can increase the labor involved in the project.
Do you tile under the toilet or around it?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first.
How do you grind a porcelain toilet?
Use an Angle Grinder Mark the cut line on the toilet using a wax pencil or felt tip marker, then put on goggles and lower the grinding wheel gently onto the mark, keeping steady pressure as it works its way through the porcelain. It’s best if you have a helper to squirt water continuously as you cut.
Can you grind down porcelain?
Porcelain tiles are a great way to improve your home. You will need to grind this tile to get rid of a stained surface, or to shape the tiles for a special installation. You will need a porcelain grinding bit and an angle grinder.
How do you sand a porcelain toilet?
You must remember to use very fine-grit sandpaper, and the porcelain must remain wet at all times. As long as the porcelain is wet, the sandpaper will “float” on the surface and will not scratch it. Water, fine sandpaper and elbow grease will do the job.
Can you shave porcelain?
Any blade that can cut porcelain has the potential to cut you. Don’t ever give a tile-cutting project less than your full attention. With rotor tools, a rapidly spinning blade bites into whatever you’re cutting. It doesn’t just slice — it tears.
How can I cut porcelain without chipping?
You’ll need a wet saw with an adjustable blade to reap the full benefits, but you can still reduce the likelihood of chipped porcelain with a standard-depth saw. There is no fail-safe way to always prevent chips, but working slowly and using a new blade helps.
What kind of blade Do I need to cut porcelain tile?
Diamond blades are circular shaped saws used for sawing and cutting construction materials. Tile installers use these types of saws on remodeling or new construction projects, when they need to cut tile, concrete, porcelain and other materials.
Why do my tiles crack when I cut them?
Because of the compressed, fragile nature of tile, it can crack, break and fragment when you try to cut it. The best way to keep tile from cracking is to use a score-and-snap tile cutter or a diamond wet saw.
How do you cut porcelain tile without a tile cutter?
For any type of tile (like ceramic, glass, or porcelain), an angle grinder is best for round cuts whereas a glass cutter can make smaller cuts. And if you have a lot of tile to trim, a wet saw is one of the easiest, quickest options.
Can you install tile around a toilet?
To install tile properly around the toilet, you need to affix it to the floor under the fixture. Because toilets sit on top of tile, any rough cuts are hidden, making it easy to achieve the appearance of tile that has been custom-cut for your bathroom.
Does toilet go on top of tile?
Yes, the toilet flange should be seated over the tile so that it can be secured tightly through the bolts. The usual method followed is to place the flange on the tile and its bottom is touching the tile. You then fix the flange with the screws ensuring they go below the thickness of the tile.
Do toilets sit on top of tile?
5 Answers. The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.
Should the toilet flange be flush with tile?
The bottom of the flange must be flush with the tile, no gaps, or it could end up too high. You don’t want a large wax depth from having it too low and if it is too high, the toilet will rock. The seal is engineered to work best with the flange on top of the finished floor.
How close should tile be to toilet flange?
When you’re tiling around an already-installed toilet, plan out your pattern so that at there is at least 2 in (5.1 cm) of space between the base of the toilet and the edges of any of the tiles you’ll be laying around it.
