Table of Contents
There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).
How do I calculate how much fabric I need for curtains?
A simple rule of thumb is that a curtain is one and a half to two times the width of the area it is meant to cover. A heavier fabric will provide fullness that a lightweight fabric can not. The lighter the weight of the fabric, the more fullness it will require.
How do I calculate how much fabric I need?
Figure out how much fabric you need with this formula: Width of fabric divided by width of one piece equals the number of pieces that fit into width (rounded down to the whole number). Total number of pieces divided by number of pieces that fit into width equals number of rows you need.
How do you calculate curtains?
Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
What is 90 by 90 in CM for curtains?
Iliana Curtain Panel Pair Size: 90 inches (229 cm) Width x 72 inches (183 cm Drop): Praline.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How many yards of fabric do I need calculator?
Dimensions that fit into the width of the fabric Take the total length you need and divide by 36 to calculate how many yards you need. Most of our fabric is sold in full yard increments, so round up to the nearest yard.
How many feet is in a yard of fabric?
1 yard is 3 feet long. Remember the width can change. It could be 60″ wide, 72″ wide or even 102″ wide, but the length of a yard is always 36 inches or 3 feet.
How do I calculate yardage for upholstery?
Measure the length and width of the front of the sofa. Then, measure the inside and outside of the arms and the seating area with the cushions removed. Once you have your numbers, divide by 36 to determine the yardage. Keep in mind that upholstery fabric is usually 54 inches wide.
How many yards of fabric do I need for a 20×20 pillow?
Sizing Up Fabric Needs for Pillow Covers Dimensions (Length by Width) Amount of Fabric Needed for 1 Pillow Cover (Using 54-inch Wide Fabric with No Pattern Matching) 16 x 16 inches 1/2 yard 18 x 18 inches 5/8 yard 20 x 20 inches 3/4 yard 30 x 30 inches 1 yard.
When buying curtains is the width per curtain?
The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.
How much extra fabric do I need for curtains?
Fabric calculations – Most curtains will require somewhere between 1 ½ and 2 ½ times fullness, depending on the heading and look you want to achieve. I always prefer to be generous and use 2 ½ times the width, skimpy curtains don’t look good and you can always use any extra fabric for cushions or tie backs.
How much wider should curtains be than the window?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod.
What are standard lengths for curtains?
Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. “Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. They don’t look right in most scenarios and end up being an awkward length,” says Curtis.
What is 168×183 curtains in inches?
Size 168cm (66 inches) wide by 183cm (72 inches) drop. Width refers to one curtain panel before hanging. Eyelet diameter: 4cm.
What are curtain measurements?
Curtain measurements are always written with the width first and then the length. For example, a panel that is 46″ x 54″ is 46 inches wide and 54 inches long. Don’t buy your curtains just so they’re big enough to cover a window.
How do I measure curtain width?
For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you’ll be hooking your curtains into).
Do eyelet curtains need to be double width?
Buying the Correct Size Measuring for ready made eyelet curtains is very simple. Double the width to determine the total curtain width you need for your window. If you are using just one curtain and pulling it to one side, then the total width of this one curtain should be close to the number you just calculated.
Do curtains have to touch the floor?
Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.
How many yards of fabric do I need for a full size blanket?
A yard of fabric will always be 36 inches long, but they vary in width from 36 to 60 inches. Let’s say that the yard of material you want to use is 36 inches long and 60 inches wide; you will need up to three yards of fabric to make a full-size blanket.
How many yards of fabric do I need for a king size blanket?
For a king-size spread, buy 87/8 yards of 44- or 45-inch-fabric or 57/8 yards of 54- to 60-inch-wide fabric.
What does 1 yard of fabric look like?
What Does 1 Yard of Fabric Look Like? For the most part, a yard of fabric will look like a nice blanket for your dog. Depending on the width you can have a square, 36 by 36 inches; or you could have several rectangles- 36 by 45, 36 by 54, or 36 by 60 inches.
How many feet go into a yard?
Yards to Feet table Yards Feet 1 yd 3.00 ft 2 yd 6.00 ft 3 yd 9.00 ft 4 yd 12.00 ft.
Is a yard of fabric 3×3?
Measuring a Yard of Fabric Fabrics come in various widths, so a yard of the fabric refers to the length of material only. The material is unrolled from the bolt, and you should measure 36 inches or 3 feet. That’s precisely how much a yard of fabric is.
How much area does a yard of fabric cover?
A: A yard of fabric is three feet in length. There are twelve inches in a foot. If you are calculating how many square feet the fabric will cover then you multiply the length times breadth – so a 3 feet long piece of fabric that is also 3 feet wide (3 x 3) will cover 9 square feet.
