Table of Contents
Yardage chart for a standard window PAIR of basic drapery panels @ 2.5x fullness Finished Length Up To Solids & Small Prints Large Prints (v-repeat up to 24″) 60″ Long 4.5 yards 5.5 yards 70″ Long 5 yards 6 yards 80″ Long 5.5 yards 6.5 yards 90″ Long 6 yards 7 yards.
How do I calculate how much fabric I need for curtains?
A simple rule of thumb is that a curtain is one and a half to two times the width of the area it is meant to cover. A heavier fabric will provide fullness that a lightweight fabric can not. The lighter the weight of the fabric, the more fullness it will require.
How many yards of fabric do I need for an 84 inch curtain?
Covering an 84-inch window will take two widths of the fabric. Taking the length of 90 inches and multiplying it by 2, gives us 180 inches. This is equal to 15 feet, or 5 yards. In this example, curtains for a window 84 inches wide would need 5 yards of fabric.
How many yards of fabric do I need for 96 inch curtains?
If it is the width and you have a 96-inch length then you will need a total of 7 yards of fabric. That is if you are just making regular curtains with no pleats. If that is the length of the curtains then with a 40-inch width you will need 6 yards of material to complete your project.
How many yards does it take to make 2 curtain panels?
Add 1 extra yard (or one vertical repeat of the fabric) per pair if using a large print fabric. For example, if you wanted a pair of curtains that were 90″ in length, then 90+16=106 divided by 36 = 2.94 which you would round up to 3 yards of fabric per curtain, 6 yards total for the pair.
How do I calculate how much fabric I need?
Figure out how much fabric you need with this formula: Width of fabric divided by width of one piece equals the number of pieces that fit into width (rounded down to the whole number). Total number of pieces divided by number of pieces that fit into width equals number of rows you need.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How many yards does it take to make a pair of curtains?
Yardage chart for a standard window PAIR of basic drapery panels @ 2.5x fullness Finished Length Up To Solids & Small Prints Large Prints (v-repeat up to 24″) 60″ Long 4.5 yards 5.5 yards 70″ Long 5 yards 6 yards 80″ Long 5.5 yards 6.5 yards 90″ Long 6 yards 7 yards.
How many yards of fabric do I need calculator?
Dimensions that fit into the width of the fabric Take the total length you need and divide by 36 to calculate how many yards you need. Most of our fabric is sold in full yard increments, so round up to the nearest yard.
How do I calculate how much fabric I need to repeat a curtain?
To calculate the amount of patterned fabric required to make a pair of curtains: Multiply the “Number of fabric widths” by Adjusted Cut Drop. Add one vertical pattern repeat (this allows you to choose where the pattern starts).
How wide should curtains be for 100 inch window?
For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position. For an inside-mount curtain, measure from one edge inside the frame to the inside edge on the opposite side.
How much fabric do I need for pleated curtains?
When deciding on fullness. Direct Fabrics use 2x fullness for all eyelet and pencil pleat curtains unless stated otherwise and recommend 1.5x fullness for front of house stage curtains. Direct Fabrics will always round up the widths to the nearest width to avoid wastage.
How many feet is in a yard of fabric?
1 yard is 3 feet long. Remember the width can change. It could be 60″ wide, 72″ wide or even 102″ wide, but the length of a yard is always 36 inches or 3 feet.
How do I calculate yardage for upholstery?
Measure the length and width of the front of the sofa. Then, measure the inside and outside of the arms and the seating area with the cushions removed. Once you have your numbers, divide by 36 to determine the yardage. Keep in mind that upholstery fabric is usually 54 inches wide.
How do you measure a yard of fabric?
Measuring a Yard of Fabric Fabrics come in various widths, so a yard of the fabric refers to the length of material only. The material is unrolled from the bolt, and you should measure 36 inches or 3 feet. That’s precisely how much a yard of fabric is.
How wide should curtains be for 75 inch window?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How wide should curtains be compared to window?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
How wide should you hang curtains?
Each curtain panel should be at least as wide as your window. Measure from the spot you plan to hang the rod (usually four to six inches above the window, but a minimum of two inches) to the floor to figure out the length of the curtains. Add more length if you want the drapes to pool.
How many yards of fabric do I need for a 20×20 pillow?
Sizing Up Fabric Needs for Pillow Covers Dimensions (Length by Width) Amount of Fabric Needed for 1 Pillow Cover (Using 54-inch Wide Fabric with No Pattern Matching) 16 x 16 inches 1/2 yard 18 x 18 inches 5/8 yard 20 x 20 inches 3/4 yard 30 x 30 inches 1 yard.
