Table of Contents
All you need is a handful of Magic Erasers and a bucket of warm water. If you’re working on painted baseboards, add dish soap. If you have stained wood baseboards, add distilled white vinegar. Dip your eraser into the bucket, wring it out, and wipe down the baseboards.
What is the best way to clean wood baseboards?
Mix a bucket of warm water, liquid dish soap and vinegar. Dip a sponge or soft cloth in the mixture and scrub scuffs and stains. A melamine sponge (sold under the brand Mr. Clean Magic Eraser) is a good choice for scrubbing tough grime.
How do you clean and shine wooden baseboards?
HOW TO CLEAN IT Fill a bucket with warm water and ¼ cup of Murphy® Oil Soap. Begin at one end of your house and work your way through. Wipe all trim with a soft rag dipped in the cleaning solution. Ring the rag so it doesn’t drip. Scrub with the brush as needed in carved details or on any heavier grime.
How can I make my baseboards look new again?
Make your wooden furniture pieces, stairway spindles, banisters, doors, baseboards and window frames look brand new by applying a fresh coat of paint or stain over the existing lackluster surfaces. Use sandpaper to lightly roughen shiny paint or stained wood to create a better bonding surface for paint to adhere.
What is the best thing to clean woodwork?
Cleaning Mix up a spray bottle of distilled white vinegar and a drop (only one) of dish soap. You can also use a steam cleaner with a pointed nozzle attachment to get into the corners and indents of the wood. An eraser sponge works well on very smooth surfaces to remove buildup as well as stains.
What is the fastest way to clean baseboards?
Use a spray bottle to squirt cleaning solution at your baseboards, then use a mop or Swiffer baseboard cleaner to wipe and clean. Baby wipes are fast and effective at picking up dust and leaving baseboards clean if you need to work quickly. A handheld steamer with a wand attachment can remove dust and dirt in seconds.
Will vinegar and water clean baseboards?
With most dirt gone, it’s time to wipe down the baseboards and remove any grime or stains. In a bucket or bowl, mix warm water, a few drops of Dawn, and a ½ cup of white vinegar. Begin wiping down the baseboards. Hit any stubborn stains lightly with a toothbrush.
How do you make wood trim look good?
To make wood trim look more current and fresh, I suggest staying FAR AWAY from any very warm tone on the wall. Nothing is going to make your dark wood trim look more orangey or “dated” than choosing a warm color tone on your walls (yellow, tan, orange, red etc..).
How do you clean old woodwork?
Start by using a mild soap and water solution and use a soft rag to wash the woodwork. [dish washing soap works fine] Start washing with a damp rag, use only enough soapy water to wet the wood. Change the rag often. Most times this cleaning method will work fine.
What is the best way to clean painted woodwork?
You can clean white painted woodwork with dishwashing soap, cleaner, or vinegar. Use a damp cloth with the cleaner on it and wipe the surface of the woodwork until you are satisfied. Make sure not to use excess water.
How do you remove grime from wood?
Method Dust your furniture. Dampen a clean, dry cloth (non-scratching and preferably microfibre) with some water and gently wipe the surface. Use mineral spirits. Apply a liberal amount of mineral spirits to another clean, dry cloth. Wipe the surface. Clean off residue. Wipe away moisture. Polish and buff.
Is Murphys Oil soap good for wood?
Murphy® Oil Soap is one natural cleaner that’s effective on hardwood floors and more when used as instructed. The cleaner is also biodegradable, making it safe for the environment when discarded.
How do you clean baseboards without getting on your knees?
Cleaning Baseboards without Bending Over To dust your baseboards without bending over, use a broom, a long-handled duster, or your vacuum cleaner’s wand with a dusting attachment. Scrubbing grimy baseboards without bending over or getting on your knees is a bit harder, though. That doesn’t mean it’s impossible.
How often should you dust baseboards?
Your baseboards need a vacuum or duster cleaning once every three months to collect dirt, dust and buildup. You can also use a microfiber cloth to run along the side of your baseboards for tougher-to-reach areas.
How do you clean baseboards with dryer sheets?
Swipe the used dryer sheet over dusty baseboards. The sheet quickly attracts and holds buildup and coats the baseboards with its anti-static residue, which will repel dust and pet hair. Clean the baseboards with a dryer sheet whenever you notice dust buildup.
Can you use Clorox wipes on baseboards?
On Your Baseboards This is one of my favorite uses for Clorox® Disinfecting Wipes with Micro-Scrubbers. They are perfect for tackling pesky baseboards filled with dirt and grime.
Can you use magic eraser on baseboards?
One way to clean the baseboards is using a Magic Eraser. For example, use a bucket of soapy water or a mixture of vinegar and water to clean. It cleans baseboards easily, and will quickly take off all of the junk that has accumulated on your baseboards.
What are magic erasers?
The truth is, Magic Erasers are just tiny rectangular pieces of melamine foam with a cleaning agent inside. A melamine sponge is more dense than your average cleaning sponge and its tiny pores make it a light abrasive, not unlike that of an extra fine sheet of sandpaper.
How do you clean dirty caulking from baseboards?
Grab a stack of Magic Erasers (or whichever brand you prefer), a bucket of warm, soapy water (or vinegar and water) and simply swipe. Wring the sponge out well before you wipe so you don’t leave too-damp boards to dry. If you don’t have painted baseboards, substitute wood cleaner.
How do you wet wash baseboards?
Get a bucket of warm water, Magic Erasers, and liquid dish soap. Mix the water and soap before dipping your Magic Eraser into it and wringing it out. Scrub at the spots on your baseboards. If you don’t have painted baseboards, swap out the dish soap for wood cleaner.
How do you get urine out of baseboards?
Spray 3 percent hydrogen peroxide on the spot and let sit for a few minutes. Blot dry with a clean cloth. For a stronger solution, mix 3 percent hydrogen peroxide with a squirt of dish soap and a sprinkle of baking soda. Spray this mixture on; let it sit for a few minutes; then blot dry.
