Table of Contents
There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).
How do I calculate how much fabric I need for curtains?
A simple rule of thumb is that a curtain is one and a half to two times the width of the area it is meant to cover. A heavier fabric will provide fullness that a lightweight fabric can not. The lighter the weight of the fabric, the more fullness it will require.
How do I calculate how much fabric I need?
Figure out how much fabric you need with this formula: Width of fabric divided by width of one piece equals the number of pieces that fit into width (rounded down to the whole number). Total number of pieces divided by number of pieces that fit into width equals number of rows you need.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How many yards of fabric do I need calculator?
Dimensions that fit into the width of the fabric Take the total length you need and divide by 36 to calculate how many yards you need. Most of our fabric is sold in full yard increments, so round up to the nearest yard.
When buying curtains is the width per curtain?
The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.
How much wider should curtains be than the window?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod.
How long should drapes be?
How Long Should Curtains Be? Floor-length is the way to go, unless there’s a radiator or a deep sill in the way. Ready-made panels are available in lengths from 63 to 144 inches. Measure from the floor to where you’ll hang the rod, then round up.
How many feet is in a yard of fabric?
1 yard is 3 feet long. Remember the width can change. It could be 60″ wide, 72″ wide or even 102″ wide, but the length of a yard is always 36 inches or 3 feet.
How do I calculate yardage for upholstery?
Measure the length and width of the front of the sofa. Then, measure the inside and outside of the arms and the seating area with the cushions removed. Once you have your numbers, divide by 36 to determine the yardage. Keep in mind that upholstery fabric is usually 54 inches wide.
How many yards of fabric do I need for a 20×20 pillow?
Sizing Up Fabric Needs for Pillow Covers Dimensions (Length by Width) Amount of Fabric Needed for 1 Pillow Cover (Using 54-inch Wide Fabric with No Pattern Matching) 16 x 16 inches 1/2 yard 18 x 18 inches 5/8 yard 20 x 20 inches 3/4 yard 30 x 30 inches 1 yard.
How wide should curtains be for 75 inch window?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How do I measure curtain width?
For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you’ll be hooking your curtains into).
Do eyelet curtains need to be double width?
Buying the Correct Size Measuring for ready made eyelet curtains is very simple. Double the width to determine the total curtain width you need for your window. If you are using just one curtain and pulling it to one side, then the total width of this one curtain should be close to the number you just calculated.
How many yards of fabric do I need for a full size blanket?
A yard of fabric will always be 36 inches long, but they vary in width from 36 to 60 inches. Let’s say that the yard of material you want to use is 36 inches long and 60 inches wide; you will need up to three yards of fabric to make a full-size blanket.
How many yards of fabric do I need for a king size blanket?
For a king-size spread, buy 87/8 yards of 44- or 45-inch-fabric or 57/8 yards of 54- to 60-inch-wide fabric.
What does 1 yard of fabric look like?
What Does 1 Yard of Fabric Look Like? For the most part, a yard of fabric will look like a nice blanket for your dog. Depending on the width you can have a square, 36 by 36 inches; or you could have several rectangles- 36 by 45, 36 by 54, or 36 by 60 inches.
Are curtains measured width by length?
Most ready-made curtains come in these widths: 117cm (46”), 168cm (66”) or 228cm (90”). To work out which one you need, measure the length of the rail or pole (between the finials), not the window. This measurement is the width of each curtain and means they’ll have a lovely, full gather even when closed.
When buying curtains do they come in pairs?
While it may seem logical that curtains should come in sets of two, curtains do not always come in pairs. They most often come in panels. Panels are a single piece of fabric or one curtain. If you want a typical curtain pair, you will need to buy two panels.
What is the standard width of curtains?
The standard lengths of curtains and drapery panels are 63 inches, 84 inches, 95 inches,108 inches and 120 inches. The curtains are 24 and 36 inches in length. 54 inches is a standard width of the panel.
How wide should curtains be for 60 inch window?
For example, for a 60-inch window with two curtain panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered each need to be at least 42 inches wide.
How wide should curtains be for 100 inch window?
For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position. For an inside-mount curtain, measure from one edge inside the frame to the inside edge on the opposite side.
